Konica Minolta Bizhub 200 Bedienungsanleitung

User’s Guide

[Advanced Scan Operations]

Introduction

200/250/350 x-1

Introduction

Thank you for choosing this machine.

This User’s Guide contains details on the operations required to use the ad-

vanced Scan functions of the bizhub 200, 250 and 350, precautions on their

use, and basic troubleshooting procedures. In order to ensure that these ma-

chines are used correctly and efficiently, carefully read this User’s Guide be-

fore using the machine. After reading the User’s Guide, store it in the User’s

Guide holder so that it can easily be referred to when questions or problems

arise during operation.

Views of the actual equipment may be slightly different from the illustrations

used in this User’s Guide.

Energy Star®

As an ENERGY STAR®Partner, we have determined that this machine meets

the ENERGY STAR®Guidelines for energy efficiency.

What is an ENERGY STAR®Product?

An ENERGY STAR®product has a special feature that allows it to automat-

ically switch to a “low-power mode” after a period of inactivity. An ENERGY

STAR®product uses energy more efficiently, saves you money on utility bills

and helps protect the environment.

Introduction

x-2 200/250/350

Trademarks and registered trademarks

KONICA MINOLTA, KONICA MINOLTA Logo, and The essentials of imaging

are registered trademarks or trademarks of KONICA MINOLTA HOLDINGS,

INC.

PageScope and bizhub are registered trademarks or trademarks of KONICA

MINOLTA BUSINESS TECHNOLOGIES, INC.

Netscape Communications, the Netscape Communications logo, Netscape

Navigator, Netscape Communicator, and Netscape are trademarks of Net-

scape Communications Corporation.

Compact-VJE

RC4®is a registered trademark or trademark of RSA Security Inc. in the Unit-

ed States and/or other countries.

RSA®is a registered trademark or trademark of RSA Security Inc. in the Unit-

ed States and/or other countries.

OpenSSL Statement

OpenSSL License

Redistribution and use in source and binary forms, with or without modifica-

tion, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice,

this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright no-

tice, this list of conditions and the following disclaimer in the documen-

tation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must

display the following acknowledgment:

“This product includes software developed by the OpenSSL Project for

use in the OpenSSL Toolkit. (http://www.openssl.org/)”

4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used

to endorse or promote products derived from this software without prior

written permission. For written permission, please contact openssl-

[email protected].

5. Products derived from this software may not be called “OpenSSL” nor

may “OpenSSL” appear in their names without prior written permission

of the OpenSSL Project.

6. Redistributions of any form whatsoever must retain the following ac-

knowledgment:

“This product includes software developed by the OpenSSL Project for

use in the OpenSSL Toolkit (http://www.openssl.org/)”

Introduction

200/250/350 x-3

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND

ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIM-

ITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT-

NESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT

SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR

ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CON-

SEQENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCURE-

MENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR

PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON

ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,

OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY

WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE.

This product includes cryptographic software written by Eric Young

(eay@crypt-Soft.com). This product includes software written by Tim Hud-

son (tjh@cryptsoft.com).

Original SSLeay License

This package is an SSL implementation written by Eric Young (eay@crypt-

soft.com).

The implementation was written so as to conform with Netscape’s SSL.

This library is free for commercial and non-commercial use as long as the fol-

lowing conditions are adhered to. The following conditions apply to all code

found in this distribution, be it the RC4, RSA, Ihash, DES, etc., code; not just

the SSL code.

The SSL documentation included with this distribution is covered by the

same copyright terms except that the holder is Tim Hudson (tjh@crypt-

soft.com).

code are not to be removed. If this package is used in a product, Eric Young

should be given attribution as the author of the parts of the library used. This

can be in the form of a textual message at program startup or in documen-

tation (online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without modifica-

tion, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the copyright notice, this list

of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright no-

tice, this list of conditions and the following disclaimer in the documen-

tation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must

display the following acknowledgement:

“This product includes cryptographic software written by Eric Young

([email protected])”

Introduction

x-4 200/250/350

The word ‘cryptographic’ can be left out if the routines from the library

being used are not cryptographic related :-).

4. If you include any Windows-specific code (or a derivative thereof) from

the apps directory (application code) you must include an acknowledge-

ment:

“This product includes software written by Tim Hudson (tjh@crypt-

soft.com)”

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EX-

PRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AU-

THOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCI-

DENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE

GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILI-

TY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

The licence and distribution terms for any publicly available version or deriv-

ative of this code cannot be changed, i.e., this code cannot simply be copied

and put under another distribution licence [including the GNU Public Li-

cence.]

All other product names mentioned are trademarks or registered trademarks

of their respective companies.

Information carried in this manual including design and related materials, and

software contained in the machine and software attached to the CD-ROM

are valuable assets of NEC, NEC AccessTechnica, Ltd. and respective licen-

see(s).

NEC, NEC AccessTechnica, Ltd. and the licensee shall reserve all rights to

design, produce, copy, use and sell this manual, including the patents, cop-

yrights, and other proprietary rights, except when such an action is permitted

to be transferred to another company with a written consent.

Introduction

200/250/350 x-5

Contents

Introduction

Energy Star®..................................................................................... x-1

What is an ENERGY STAR®Product? ............................................x-1

Trademarks and registered trademarks ......................................... x-2

Contents ............................................................................................ x-5

About this manual ........................................................................... x-12

Structure of the manual ................................................................x-12

Notations .......................................................................................x-12

Images that are used ....................................................................x-13

Function precautions ....................................................................x-13

Functions that cannot be used .....................................................x-13

User’s Guides .................................................................................. x-15

User’s Guide [Copy Operations] ...................................................x-15

User’s Guide [Network Scanner Operations] ................................x-15

User’s Guide [Box Operations] .....................................................x-15

User’s Guide [Print Operations] ....................................................x-15

Quick Guide [Print Operations] .....................................................x-15

User’s Guide [Advanced Scan Operations] (this manual) .............x-15

Explanation of manual conventions .............................................. x-16

1Features

1.1 IP address faxing .............................................................................. 1-3

1.2 Scan to PC ......................................................................................... 1-4

1.3 IP Scanner ......................................................................................... 1-5

1.4 IP Relay .............................................................................................. 1-6

1.5 PageScope Web Connection ........................................................... 1-7

2 IP address faxing

2.1 Specifying a recipient with a one-touch dial button ..................... 2-3

Selecting a one-touch dial button .................................................. 2-3

Specifying a recipient by touching a one-touch dial button .......... 2-3

Entering the number of the one-touch dial button ......................... 2-5

Searching for a one-touch recipient .............................................. 2-8

2.2 Entering an address ....................................................................... 2-11

To enter an address ..................................................................... 2-11

2.3 Specifying the scanning quality and zoom ratio .......................... 2-15

Original Type ................................................................................ 2-15

Introduction

x-6 200/250/350

To select an Original Type setting ................................................2-16

Density ..........................................................................................2-16

To select a Density setting ............................................................2-17

Set Original Size ............................................................................2-18

2.4 Specifying additional functions ......................................................2-20

Specifying the transmission source information ...........................2-21

Specifying whether the destination name is inserted ...................2-22

Specifying the transmission report printing condition ..................2-23

Specifying 2in1 transmission ........................................................2-24

Specifying double-sided transmission settings ............................2-24

Specifying priority transmission ....................................................2-25

Specifying timer transmission settings .........................................2-26

Specifying the stamp setting ........................................................2-27

2.5 If the transmission could not be completed .................................2-28

Viewing the transmission report ...................................................2-28

Resending .....................................................................................2-29

2.6 Receiving an IP address fax ...........................................................2-30

2.7 Adding a recipient ...........................................................................2-31

To program a one-touch dial button .............................................2-32

Changing/deleting a one-touch dial button ..................................2-38

Copying a one-touch dial button ..................................................2-39

Registering/deleting the secondary recipient ...............................2-40

Naming an index ...........................................................................2-41

To name an index .........................................................................2-41

Registering a mail program ...........................................................2-43

To register a mail program ............................................................2-44

Changing/deleting a mail program ...............................................2-49

3 Scan to PC operations

3.1 Before saving .....................................................................................3-3

Installing IP Scanner on the computer ............................................3-3

Checking the network settings .......................................................3-3

3.2 Specifying a destination with a one-touch dial button ..................3-4

Selecting a one-touch dial button ...................................................3-4

Specifying a recipient by touching a one-touch dial button ...........3-4

Entering the number of the one-touch dial button .........................3-6

Searching for a one-touch recipient ...............................................3-9

3.3 Entering an address ........................................................................3-12

To enter an address ......................................................................3-12

3.4 Specifying the scanning quality and zoom ratio ..........................3-16

Original Type .................................................................................3-16

To select an Original Type setting ................................................3-17

Introduction

200/250/350 x-7

Density ......................................................................................... 3-17

To select a Density setting ........................................................... 3-18

Set Original Size ........................................................................... 3-19

3.5 Specifying additional functions ..................................................... 3-21

Specifying the transmission report printing condition ................. 3-22

Specifying 2in1 transmission ....................................................... 3-23

Specifying double-sided transmission settings ........................... 3-24

Specifying priority transmission ................................................... 3-25

Specifying timer transmission settings ........................................ 3-25

Specifying the stamp setting ....................................................... 3-26

Specifying the file name ............................................................... 3-27

3.6 If the data could not be saved ....................................................... 3-29

Viewing the transmission report ................................................... 3-29

Resending .................................................................................... 3-30

3.7 Registering a destination ............................................................... 3-31

Programming a one-touch dial button ......................................... 3-31

To program a one-touch dial button ............................................ 3-32

Changing/deleting a one-touch dial button ................................. 3-38

Copying a one-touch dial button ................................................. 3-39

Registering/deleting the secondary recipient .............................. 3-40

4IPScanner

4.1 Before using IP Scanner .................................................................. 4-3

IP Scanner and ImageReceiver ...................................................... 4-3

Using a dial-up router .................................................................... 4-3

Using a modem or terminal adapter .............................................. 4-4

Using Windows XP Service Pack 2 ................................................ 4-4

Allowing ImageReceiver to be used ............................................... 4-5

ImageReceiver port conflicts ......................................................... 4-6

4.2 Installing/uninstalling utilities .......................................................... 4-7

ImageReceiver installation methods .............................................. 4-7

Installing utilities ............................................................................. 4-7

Uninstalling utilities (from Windows 98/98SE/Me/NT 4.0) ............. 4-9

Uninstalling utilities (for Windows 2000/XP/Server 2003) ............ 4-10

4.3 IP Scanner operations .................................................................... 4-11

Main window ................................................................................ 4-11

Available commands .................................................................... 4-12

Scanner Settings dialog box ........................................................ 4-15

Sort Settings dialog box (Scanner tab) ........................................ 4-16

Sort Settings dialog box (RX Document tab) ............................... 4-17

Sort Settings dialog box (TX Document tab) ............................... 4-18

Divided Settings dialog box ......................................................... 4-19

Notify Settings dialog box ............................................................ 4-20

Introduction

x-8 200/250/350

ViewWindow .................................................................................4-22

4.4 ImageReceiver operations ..............................................................4-23

ImageReceiver icon ......................................................................4-23

ImageReceiver commands ...........................................................4-23

4.5 Registering scan buttons and scan operations ............................4-26

General operation .........................................................................4-26

Starting IP Scanner .......................................................................4-26

Registering a scan button .............................................................4-27

Scanning a document using the registered settings ....................4-30

Viewing the scanned image ..........................................................4-31

Exiting IP Scanner .........................................................................4-32

4.6 Other operations ..............................................................................4-33

Forwarding a received document to IP Scanner ..........................4-33

Forwarding to IP Scanner .............................................................4-34

5 IP Relay operations

5.1 Before transmitting ...........................................................................5-3

Setting “Gateway TX” to “Restrict” .................................................5-3

Specifying settings for relay stations ..............................................5-3

5.2 Specifying a recipient with a one-touch dial button ......................5-4

Selecting a one-touch dial button ...................................................5-4

Specifying a recipient by touching a one-touch dial button ...........5-4

Entering the number of the one-touch dial button .........................5-6

Searching for a one-touch recipient ...............................................5-9

Specifying chain dialing ................................................................5-12

5.3 Entering a fax number .....................................................................5-13

To enter a fax number ...................................................................5-13

5.4 Specifying the scanning quality and zoom ratio ..........................5-17

Original Type .................................................................................5-17

To select an Original Type setting ................................................5-18

Density ..........................................................................................5-18

To select a Density setting ............................................................5-19

Set Original Size ............................................................................5-20

5.5 Specifying additional functions ......................................................5-22

Specifying the transmission report printing condition ..................5-23

Specifying 2in1 transmission ........................................................5-24

Specifying double-sided transmission settings ............................5-24

Specifying the priority transmission setting ..................................5-25

Specifying timer transmission settings .........................................5-26

Specifying the stamp setting ........................................................5-27

Introduction

200/250/350 x-9

5.6 If the transmission could not be completed ................................ 5-28

Viewing the transmission report ................................................... 5-28

Resending .................................................................................... 5-29

5.7 Registering a recipient ................................................................... 5-30

Programming a one-touch dial button ......................................... 5-30

To program a one-touch dial button ............................................ 5-31

Changing/deleting a one-touch dial button ................................. 5-36

Copying a one-touch dial button ................................................. 5-37

Registering/deleting a secondary recipient ................................. 5-38

6 Specifying settings using PageScope Web Connection

6.1 Settings that can be specified using PageScope Web

Connection ........................................................................................ 6-3

Scan tab (User mode) .................................................................... 6-3

Network tab (Administrator mode) ................................................. 6-4

6.2 Using PageScope Web Connection ................................................ 6-5

System requirements ..................................................................... 6-5

Accessing PageScope Web Connection ....................................... 6-5

If user authentication settings have been applied ......................... 6-6

If account track settings have been applied .................................. 6-6

Structure of pages ......................................................................... 6-7

Logging on to Administrator mode ................................................ 6-8

Web browser cache ..................................................................... 6-10

With Internet Explorer .................................................................. 6-10

With Netscape .............................................................................. 6-10

6.3 One-Touch Key Registration (User mode) ................................... 6-11

Naming an index .......................................................................... 6-14

Registering a one-touch dial recipient ......................................... 6-16

Registering a secondary recipient ............................................... 6-18

To regist a secondary recipient .................................................... 6-18

Changing the settings for a one-touch dial recipient ................... 6-21

Deleting a one-touch dial recipient .............................................. 6-23

6.4 IP Relay Settings (Administrator mode) ....................................... 6-25

Selecting the IP relay station to be used ..................................... 6-25

To select a relay station ............................................................... 6-25

Registering an IP relay station ..................................................... 6-27

To register an IP relay station ...................................................... 6-27

Andere Handbücher für bizhub 200

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Konica Minolta Multifunktionsdrucker Handbücher

Konica Minolta

Konica Minolta BIZHUB C250 Bedienungsanleitung

Konica Minolta

Konica Minolta PF-210 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub c3110 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 185 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub PRO C6000L Bedienungsanleitung

Konica Minolta

Konica Minolta FK-101 Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB C300 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 350 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C658 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 223 Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 4690MF Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB PRO 1050 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C220 Series Bedienungsanleitung

Konica Minolta

Konica Minolta A0HF012 Bedienungsanleitung

Konica Minolta

Konica Minolta Bizhub C3850 Bedienungsanleitung

Konica Minolta

Konica Minolta Pagero 4650EN Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C350 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 160 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 361 Gebrauchsanweisung

Konica Minolta

Konica Minolta bizhub 750 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub PRO 1051 Series Bedienungsanleitung

Konica Minolta

Konica Minolta 7216 Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 500 Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 2590 Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung

Copystar

Copystar CS 4551ci Bedienungsanleitung

Konica Minolta bizhub 200 Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken