Konica Minolta Bizhub C650 Series Bedienungsanleitung

Issued by BT-CSO Ver 1.03 1

2008/05/27

Ver.1.03

KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.

CS Operations

bizhub C203/C253/C353/C451/C550/C650

LK-101 LK-102 LK-103

License Authentication Operation Guide

Issued by BT-CSO Ver 1.03 2

Contents

About this guidebook ...................................................................................... 4

Outlines of Functions ...................................................................................... 4

Input/ Display confirmation procedure when operation the license

management..................................................................................................... 8

About upgrade of firmware.............................................................................. 9

Upgrade Instruction and instruction when using functions added from

i-Option.............................................................................................................. 9

Instruction for part replacement ..................................................................... 9

Activation........................................................................................................ 10

•Overview of Activation Operation.......................................................................10

•Necessary Hardware............................................................................................10

•Necessary Information ........................................................................................ 11

•Relation of Hardware, Requirement/ Condition, and Information ................... 11

•Flow chart for Activation.....................................................................................12

•Activation using [License Install Utility]............................................................13

•Activation Procedure...........................................................................................14

Deactivation.................................................................................................... 31

•Overview of Deactivation operation...................................................................31

•Necessary Hardware............................................................................................31

•Necessary Information ........................................................................................32

•Relation of Hardware, Requirement/ Condition, and Information ...................32

•Flow chart for Deactivation.................................................................................33

•Deactivation Procedure.......................................................................................35

Repair .............................................................................................................. 45

•Overview of Repair Operation.............................................................................45

•Necessary Hardware............................................................................................46

Issued by BT-CSO Ver 1.03 3

•Necessary Information ........................................................................................46

•Relation of Hardware, Requirement/ Condition, and Information ...................46

•Flow chart for Repair ...........................................................................................47

Initialization..................................................................................................... 56

•Overview of Initialization operation....................................................................56

•Necessary Hardware............................................................................................56

•Necessary Information ........................................................................................56

•Relation of Hardware, Requirement/Condition, and Information ....................57

•Flow chart for Initialization..................................................................................58

Operation procedure when executing particular operation........................ 67

Issued by BT-CSO Ver 1.03 4

About this guidebook

From Mosel/ Thames i-Option firmware, the license activation system is newly adopted. Some

additional functions will be available after the license activation. This guidebook explains

outline and operation procedure of License Management.

¾i-Option firmware is also including some additional functions that can be used without

the authentication. For the explanation of those functions. Please refer to the PRI for

the firmware.

Outlines of Functions

¾New “LicenseActivation Base Functions” are included in Mosel/ Thames i-Option

firmware. Activation Base Functions have several types of functions. (Please refer to

the functions listed below.) Those functions are included in the firmware. If you

purchase the license and activate the LicenseActivation Base Functions, the functions

will be available. Also, the function enhancements do not necessaryActivation are

included in the firmware.About those functions, please refer to not this guidebook but

PRI distributed with the firmware or the following chapter.

¾ License Activation Base Functions

In this guidebook, the functions like “LK-101, LK-102, LK-103” (You need to purchase

the license when using these functions.) are called “LicenseActivation Base

Functions”.

LK-101

Web browser function, Image panel, and it is possible to register the picture

(thumbnail) in the address book on the image panel.

LK-102

Enhancement of PDF encryption (response to public key and AES, function that

can write title/ creator when sending PDF file, etc.)

LK-103 LK-103 Includes “LK-101” and “LK-102”.

License Operations

When you start, stop or repair using the license activation base functions, those operations,

Activation, Deactivation, Repair or Initialization, have to be made as you intended. There

are 4 types of License Operations.

License Operations

zActivation

This is the operation to enable License Activation Base Functions and make

the functions operational.

Issued by BT-CSO Ver 1.03 5

It is possible to execute this operation inAdministrator Mode or Service

Mode.

zDeactivation

This is the operation to invalidate the activated License Activation Base

Functions.

It is possible to execute this operation in Service Mode.

zRepair

It is necessary to execute this operation when the error of license

management state is displayed on the control panel. If it occurs, the License

Activation Base Functions are temporarily disabled. To recover the condition,

Repair operation has to be performed.

It is possible to execute this operation in Service Mode.

zInitialization

Execute this operation when the error state is not resolved after performing

Repair. Basically, execute Initialization only when the error of license

management state occurs after performing Repair.

When performing the operation, please confirm that the error of license

management state occurs under what conditions (executed operations, parts

replacement, setting change and so on).

It is possible to execute this operation in Service Mode.

Issued by BT-CSO Ver 1.03 6

Necessary information to perform License operation

You need to get necessary information for each operation and send it to MFP and LMS to

execute the license operations.

Following chart shows necessary information for each operation.

Activation Deactivation Repair Initialization To LMS From LMS

Serial Number X X X X X

Token Number X X X(*1) X(*2) X

Request Code X X X X

License Code X X(*1) X(*2) X

Deactivation code X X

Deactivation Complete Code X X

Repair Request Code (Repair

Demand Code)

X X

Repair Code

(Repair Permission Code)

X X

Initialization Code X X(*3)

*1 If you exchange NVRAM when performing Repair, you need this information.

*2 Require when re-activate the functions after the initialization.

*3 Necessary to contact the support to acquire the code.

Explanation of those Numbers used on those operations/ Codes are as follows.

Serial Number

Serial Number for MFP body.

Token Number

Token Number is printed on the Token Kit, or will be informed when purchasing the

license. You need this number to enable LicenseActivation Base Functions.

Request Code

This is ID Number to recognize the individual MFP. Serial Number information is

also included in the Request Code.

License Management Server (LMS)

The Server performs license management. When you activate/ deactivate or make

other operations for License Activation Base Functions, you need to access the

License Management Server (Web site).

Issued by BT-CSO Ver 1.03 7

License Code

Use this code to MFP when you activate License Activation Base Functions.

License Management Server (LMS) issues this code.

Deactivation Code

This code is issued from LMS. This code is prepared on LMS when the necessary

information is entered in LMS.After receiving the code, you need to enter it in MFP

through the control panel to perform the deactivation.

Deactivation Complete Code

The information indicates to let LMS know the deactivation operation has been

complete properly. MFP issues this code.

Repair Request Code (Repair Demand Code)

On the Service activates the error of license management state may be detected,

and it is displayed on the control panel. At this time, you need to issue Repair

Request to LMS. The information issued to request the Repair Code (Repair

Permission Code).

Repair Code (Repair Permission Code)

When you enter the Repair Request Code (Repair Demand Code) to LMS,

information to solve the error of license management state is issued from LMS.

This information is Repair Code (Repair Permission Code).

Initialization Code

In the event that the error of license management state is not resolved, the license

has to be reset to the initial condition forcibly. The information used to do it is the

initialization code and issued from LMS.

After that, it is necessary to activate the license again, to use the functions.

Issued by BT-CSO Ver 1.03 8

Input/ Display confirmation procedure when operation the license

management

Details about the procedure are described from the next page. You need to execute the

license operation on the LMS/ PC (Web browser)/ MFP panel.

(Image)

It is possible to input/ display information in the following ways.

zUse the printing from MFP.

zDisplay the information on the panel or input the information from panel.

zDisplay the information on the PC. Input the information from (PageScope

Web Connection) or Web browser screen.

* Actual screen may be different from the operation procedure screen in this

guidebook.

LMS

MFP PC

Issued by BT-CSO Ver 1.03 9

Requirements for using License Activation Base Functions

¾You must prepare the followings to use the LicenseActivation Base Functions.

zFirmware for i-Option

zAdditional Memory: Additional Memory is included in Upgrade Kit (UK-201).

zToken Certificate: Token Certificate is included in License Kit (LK-101/102/103).

About upgrade of firmware

¾You need to upgrade to firmware for i-Option to use functions of i-Option.

C650: DLBT0800064*

C550: DLBT0800065*

C451: DLBT0800066*

C353/C253/C203: DLBT0800114*

zAbout firmware version for i-Option and upgrade procedure, please refer to

“Upgrade Procedure to i-Option” in PRI of above CSES numbers.

zWithout upgrade of firmware for i-Option, operation screen for activation is not

displayed on operation panel even if you purchase Token Certificate. Therefore,

you cannot use LicenseActivation Base Functions.

zAfter upgrade is completed, please refer to “Activation Procedure” and perform

Activation of License Activation Base Functions.

Upgrade Instruction and instruction when using functions added from

i-Option

¾Please refer to “Cautions” in the PRI of above CSES numbers.

Instruction for part replacement

¾If you need replacement of NVRAM or Service EEPROM, please exchange it for new

one.

Issued by BT-CSO Ver 1.03 10

Activation

You need to perform Activation to use License Activation Base Functions. The following

is the explanation about theActivation.

Overview of Activation Operation

Find Token Number on Token Certificate, and get Serial Number and Request

Code from MFP. From PC, access to LMS using Web browser, and input Token

Number, Serial Number and Request Code to LMS. License Code is output from

LMS. If you input the code to MFP, Activation will be completed.

Who to perform the operation

zMFPAdministrator

zCustomer engineer (Sales person)

Necessary Hardware

MFP

Upgrade Kit (UK-201 additional memory etc.)

License Kit (LK-101/LK-102/LK-103, Token Certificate)

PC

License Management Server (LMS) (BT manages this server.)

MFP

Token Certificate

[Serial Number]

[Request Code]

[Token Number]

[License Code]

Activation

Input

Output

Input

LMS

Andere Handbücher für bizhub C650 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Konica Minolta Multifunktionsdrucker Handbücher

Konica Minolta

Konica Minolta bizhub C550 Series Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB C300 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 552 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C220 Series Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C451 Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub proc6500 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C350 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 501 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 25e Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 1680MF Bedienungsanleitung

Konica Minolta

Konica Minolta 8020 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 4750 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C652 Series Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 250 Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 162 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C203 Series Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 554E Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C550 Series Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C360 Series Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 25 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C650 Series Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C654 Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung

Copystar

Copystar CS 4551ci Bedienungsanleitung