Konica Minolta Bizhub C652 Series Leitfaden

CMS REPLACEMENT INSTRUCTIONS

(Customer Maintenance Support)

CMS REPLACEMENT INSTRUCTIONS

1. Drum unit/K, Ozone filter, Toner filter

Introduction

CMS:

• The CMS (Customer Maintenance Support) is a system that supports the customer who

conducts a parts replacement operation by himself without getting an technical assis-

tance from the customer engineer, to minimize the downtime (shutdown period of the

machine operation) of the machine of the customer.

Notices to the customer who employs the CMS:

• When youwant to employ the CMS, be sure to follow the instructions given by the cus-

tomer engineer.

And also, when youconduct a part replacement operation, be sure to read each replace-

ment instruction and follow the specific instructions given in it. For your safety while in the

replacement operation, be sure to keep this CMS Instructions for Replacement safely,

and also be careful not to get it lost. Should it get lost, contact our service representative.

Registered trademark

•bizhub is a registered trademark of KONICA MINOLTA BUSINESS TECHNOLOGIES,

INC.

CONTENTS

For your safe operation ....................................................................................................S-1

Meaning of the graphic expression .............................................................................S-1

Examples of graphic symbols .....................................................................................S-1

Caution notice/Caution label .......................................................................................S-6

REPLACEMENT INSTRUCTIONS ...................................................................................... 1

For your safe operation

S-1

For your safe operation, the following are the descriptions of the notices and requests that

youhave to follow when replacing parts. Be sure to read them carefully before conducting

any part replacement operation.

•Besure to keep this CMS Replacement Instructions not to get it lost.

•Besure to follow the caution items given in the CMS Replacement Instructions.

In this CMS Replacement Instructions and on the copier, various types of graphic expres-

sions are employed to allow youto conduct a part replacement operation properly without

causing harm to youas well as other people, and also damage to the property.

The expressions and their meaning are as shown below.

For your safe operation

Meaning of the graphic expression

WARNING

Indicates an action having a high possibility of suffering death or a

serious injury when handled inappropriately without taking no notice

of this expression.

CAUTION

Indicates an action having a high possibility of suffering an injury or

causing damage to the property when handled inappropriately without

taking no notice of this expression.

Examples of graphic symbols

This symbol indicates an action that requires an additional caution (including

warning). A specific description of the caution is given in the symbol.

Ex.) [ ] This is a graphic symbol representing “High temperature.”

This symbol indicates an action prohibited. A specific description of the prohibition

is given inside the symbol or in its vicinity.

Ex.) [ ] This is a graphic symbol representing “Do not disassemble.”

This symbol indicates an action that must be carried out. A specific description of

the action is given inside the symbol.

Ex.) [ ] This is a graphic symbol representing “Unplug power cord.”

For your safe operation

S-2

Operations before replacing any part:

CAUTION

• When conducting a part replacement operation, be sure to

get guidance from the customer engineer. And also, read

the CMS Replacement Instructions carefully before con-

ducting a part replacement operation by following the pre-

scribed procedure and using tools also prescribed.

Be sure not to conduct any operations other than those

described in the CMS Replacement Instructions. When

the prescribed procedure and tools are not employed, this

may cause damage to the copier or youmay get injured.

• The temperature gets high in the vicinity of the fusing unit.

Yo umay get burned when youcome into contact with the

area.

Before replacement operations, make sure that more than

20 minutes have elapsed since the main and sub power

switches were turned off.

WARNING

• Before starting operations, be sure to unplug the power

copier main body and the optional equipment from the

power When the power cord is plugged into the power out-

let, some electrical components may be energized even if

the power switch turned off. So, be careful not to get an

electric shock.

CMS part replacement operation:

WARNING

• Do not allow any metal parts such as clips, staples and

screws to fall into the inside or opening of the copier.

They may cause a short circuit to the internal parts of the

copier, thus leading up to a risk of an electric shock or fire.

• Check the wiring harness for squeezing and any other

damage.

Current may leak, thus leading up to a risk of an electric

shock or fire.

For your safe operation

S-3

• Make sure the wiring cannot come into contact with sharp

edges, burrs, or other pointed parts.

Current can leak, leading to a risk of electric shock or fire.

• Make sure that all screws, components, wiring, connec-

tors, etc. that were removed for safety check and mainte-

nance have been reinstalled in the original location. (Pay

special attention to forgotten connectors, pinched cables,

forgotten screws, etc.)

A risk of product trouble, electric shock, and fire exists.

CMS part replacement operation:

WARNING

Power plug, power code:

WARNING

• Make sure the power cord is plugged in the wall outlet

securely.

Contact problems may lead to increased resistance, over-

heating, and the risk of fire.

• When using the power cord set (inlet type) that came with

this product, make sure the connector is securely inserted

in the inlet of the product. When securing measure is pro-

vided, secure the cord with the fixture properly.

If the power cord (inlet type) is not connected to the prod-

uct securely, a contact problem may lead to increased

resistance, overheating, and risk of fire.

• Do not insert the power plug into the wall outlet with a wet

hand.

The risk of electric shock exists.

• When unplugging the power cord, grasp the plug, not the

cable.

The cable may be broken, leading to a risk of fire and elec-

tric shock.

For your safe operation

S-4

When any abnormal condition is found:

WARNING

• When the copier gets hot abnormally, or when it gives out

smoke, a foul smell or abnormal noise, turn off the power

switch at once.

And then be sure to unplug the power cord from the power

outlet and contact our service technician.

• When the copier is let fall or when the cover is damaged,

turn off the power switch at once. And then, be sure to

unplug the power cord from the power outlet and contact

our customer engineer.

Using the copier as it is may lead up to a fire, or youmay

get an electric shock.

CAUTION

• Some internal parts of the copier develops a high tempera-

ture, and youmay get a burn when youcome into contact

with one of these parts. When checking the internal parts

while in a part replacement operation, be careful not come

into contact with a section like these (around the fusing

unit) with a symbol indicating “High Temperature” pro-

vided.

Handling of toner and developer:

WARNING

• Toner and developer are not harmful substances, but care

must be taken not to breathe excessive amounts or let the

substances come into contact with eyes, etc. It may be

stimulative.

If the substances get in the eye, rinse with plenty of water

immediately. When symptoms are noticeable, consult a

physician.

•Never throw the used cartridge and toner into fire.

Yo umay be burned due to dust explosion.

For your safe operation

S-5

Grounding:

WARNING

• Connect the power cord to an electrical outlet that is

equipped with a grounding terminal.

For your safe operation

S-6

For this copier, there are the caution notices or labels for safety operations provided at the

locations as shown below. Be sure to take every care to avoid any accidents while in the

part replacement operation.

Caution notice/Caution label

A0P0P0E508DA

The area around the fusing unit is

extremely hot.

Touching any part other than those

indicated may result in burns.

CAUTION

Do not burn used toner cartridges.

Toner expelled from the fire is

dangerous.

WARNING

Do not burn used Imaging Units.

Toner expelled from the fire is dangerous.

WARNING

Do not position the used waste

toner box so that it is standing on

end or tilted, otherwise toner may

spill.

WARNING

2009.07

Ver. 2.0

Drum unit/ K, Ozone filter, Toner filter REPLACEMENT INSTRUCTIONS

Andere Handbücher für bizhub C652 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Konica Minolta Multifunktionsdrucker Handbücher

Konica Minolta

Konica Minolta bizhub C220 Series Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 250/350 Gebrauchsanweisung

Konica Minolta

Konica Minolta bizhub 350 Bedienungsanleitung

Konica Minolta

Konica Minolta FAX 2900 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub PRO 950 Series Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 130F Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C652 Series Bedienungsanleitung

Konica Minolta

Konica Minolta 7416CG Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C554 Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB C250 Bedienungsanleitung

Konica Minolta

Konica Minolta Bizhub 4020 Bedienungsanleitung

Konica Minolta

Konica Minolta BizHub C352 Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 2590 Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 226 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 501 Bedienungsanleitung

Konica Minolta

Konica Minolta AD-504 Bedienungsanleitung

Konica Minolta

Konica Minolta 4556-9598-01A Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUP C451 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 36 Bedienungsanleitung

Konica Minolta

Konica Minolta nizhub c250p Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C451 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C353 Series Bedienungsanleitung

Konica Minolta

Konica Minolta A0HF011 Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 2480 MF Kurzanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung

Copystar

Copystar CS 4551ci Bedienungsanleitung

Konica Minolta bizhub C652 Series Leitfaden

Beliebte Multifunktionsdrucker Handbücher anderer Marken