Konica Minolta PC-101 Bedienungsanleitung

4348-7781-03 Printed in Japan

INSTALLATION MANUAL

PC-101

for Product Code 4036

Paper Feed Cabinet

NOTES

•Before installing, be sure to unplug the power cord of the machine.

•Keep all packing materials out of the reach of children.

PC-101

– 1 –

■Outline of Installation Procedures for 4036 System

When installing the machine and associated options as a system, follow the order shown

on the left.

NOTE

For the detailed installation procedures for each option, follow the instructions given

in the corresponding Installation Manual and perform the procedures correctly.

✱ Electron System Options

PC-101 PC-201 DK-501

DF-601

AD-501

JS-601

FS-501

WT-501

FS-601

OC-501

PK-501/PK-4/

PK-131

Copier/Printer Machine

HD-501

EM-301

PC-401

Dehumidifier Heater 1C

EK-501 VI-501

D-103DT-105

Electron System Options

4348U110AA

PC-101

– 2 –

■Unpacking the Paper Feed Cabinet

NOTE

When removing the Paper Feed Cabinet from its shipping carton, do not hold onto

the reinforcement bracket (indicated by the arrow in the illustration below) (as a

personal injury or a deformed frame could result).

1. Check that the following accessories are available in the box.

4348U124AB

1 Fixing Leg...............................................................................................4

2 Fixing Leg Cover ....................................................................................4

3 Fixing Bracket ........................................................................................4

4 Shoulder Screw......................................................................................4

5 Screw (9646-0408)...............................................................................12

6 Paper Size Label....................................................................................1

7 Installation Manual (this manual) ...........................................................1

4348U020AB

4658U021AA 4658U022AA

9646040813

4348U099AB

1 2

2. Remove the protective tape from the inside

of the drawer.

NOTE

Do not peel off the tape that fixes the Paper

Feed Cabinet hookup harness in position

until the machine is attached to the Paper

Feed Cabinet.

4348U119AA Hookup Harness

4348U118AA

PC-101

– 3 –

■Attaching the machine to the Paper Feed Cabinet

■Installing the Fixing Leg and Fixing Leg covers

1. Remove the Drawer Rear Cover from the

machine (four screws).

NOTE

Be sure to remove the Drawer Rear Cover

before attempting to attach the machine to

the Paper Feed Cabinet.

4348U121AA

2. Holding onto the transportation handles at

the front and rear of the machine, place the

machine onto the Paper Feed Cabinet.

When placing the machine, use the

positioning pins in the rear of the Paper Feed

Cabinet to align the machine correctly with

the cabinet.

* Fit the rear side first.

NOTE

When attaching the machine, use care not

to apply load to the paper take-up section

of the machine.

4348U117AA

3. Peel off the tape that fixes the Paper Feed

Cabinet hookup harness in position.

4. Connect the two connectors of the Paper

Feed Cabinet hookup harness to the

machine.

4348U005AA

4348U113AA

5. Using the Fixing Brackets and Shoulder

Screws furnished with the Paper Feed

Cabinet, secure the machine to the Paper

Feed Cabinet (at two places in the rear).

4348U114AA

6. Reinstall the Lower Rear Cover which has

been removed in step 1 (four screws).

4348U116AB

7. Slide out the 3rd Drawer.

8. Using the Fixing Brackets and Shoulder

Screws furnished with the Paper Feed

Cabinet, secure the machine to the Paper

Feed Cabinet (at two places at the front).

4348U051AA

1. Move the machine and Paper Feed Cabinet

to the installation site. Then, adjust the two

adjusters at the front to let the Paper Feed

Cabinet sit on the floor.

4348U115AA

PC-101

– 4 –

■Loading Paper

NOTES

•Make sure that the top level of the paper stack does not exceed the

▼

(MAX) paper

level indicator.

•Slide the Edge Guide tightly up against the edge of the paper stack so that there is

no gap between them.

•With the Trailing Edge Stop, fit its locking tab properly into the slit at the correct

paper size position.

•Correct any curl in the paper before loading.

4348U100AC 4348U102AB

2. Install the Fixing Legs at two locations in the

front shown in the illustration (six screws

furnished with the Paper Feed Cabinet).

3. Install the Fixing Leg Covers at two locations

in the front shown in the illustration

(2 Pieces).

NOTES

•Insert the Fixing Leg Covers in the direc-

tion shown by arrow until they click into

position.

•Insert the Protruded Portions of the cover

shown by the arrows into the Fixing Leg.

4348U023AD

✍

①

③

①

✍

③

4. Install the Fixing Legs at two locations in the

rear shown in the illustration (six screws

furnished with the Paper Feed Cabinet).

5. Install the Fixing Leg Covers at two locations

in the rear shown in the illustration

(2 Pieces).

NOTES

•Insert the Fixing Leg Covers in the direc-

tion shown by arrow until they click into

position.

•Insert the Protruded Portions of the cover

shown by the arrows into the Fixing Leg.

4348U024AD

✍

①

③

①

✍

③

4348U101AC 4348U102AB

1. Slide out the 3rd Drawer.

4348U048AA

2. Load the paper stack so that it rests below

the tab fitted to the Edge Guide.

4348U095AA

4348U091AA

PC-101

– 5 –

■Installing the Ornamental Cover ■Checking and Adjusting the Paper Reference Position

1. Install the Ornamental Cover attached to the

machine (two screws).

4348U049AA

2. Slide the drawer back in.

3. Affix the Paper Size Label furnished with the

Paper Feed Cabinet to the location shown in

the illustration.

4348U052AA

1. Plug the power cord into the power outlet

and turn on the machine.

2. Display the Tech. Rep. Mode screen.

(For details of how to display the Tech. Rep.

Mode screen, see the Service Manual.)

3. Touch “Machine Adjust.”

4036P031CA

4. Touch “PRT Area.”

4036P036CA

5. Touch “Left Margin.”

4348P023CA

6. Touch “3rd” and then press the Start key.

* A test print will be produced.

4348P025CA

PC-101

– 6 –

7. Measure width A from the edge of the paper

to the pattern printed on the test print and

check that it falls within the specified range.

Specifications: 3.0 mm ± 1.0 mm

•Adjusting the Paper Reference Position

If the measured width A falls outside the

specified range, enter the correction value

using the or key.

8. Produce another test print and check to see

if width A falls within the specified range.

* If the use of the or key does not

allow the measurement to fall within the

specified range, perform the following steps.

C4658U028AA

Paper Exit

Direction

9. Slide out the drawer and unload paper from

it.

10. Loosen the three screws at the center of the

Paper Lifting Plate.

4348U008AB

11. Watching the graduations provided in the

drawer, move the Edge Guide in the rear.

•If width A is greater than the specified value,

move the Edge Guide toward the front.

•If width A is smaller than the specified value,

move the Edge Guide toward the rear.

12. Load paper and let the machine produce

another test print. Then, check width A.

* Make the adjustment until width A falls within

the specified range.

4348U009AA

13. Tighten the screws which has been loosened

in step 10.

14. Touch “END.”

15. Touch “Fin. Time” on the Tech. Rep. Mode

screen.

Inhaltsverzeichnis

Andere Konica Minolta Druckerzubehör Handbücher

Konica Minolta

Konica Minolta HD-524 Bedienungsanleitung

Konica Minolta

Konica Minolta FS-505 Bedienungsanleitung

Konica Minolta

Konica Minolta LU-204 Bedienungsanleitung

Konica Minolta

Konica Minolta IT-101 Anleitung zur Verwendung

Konica Minolta

Konica Minolta PI-506 Bedienungsanleitung

Konica Minolta

Konica Minolta AU-201S Bedienungsanleitung

Konica Minolta

Konica Minolta JS-506 Bedienungsanleitung

Konica Minolta

Konica Minolta VI-506 Bedienungsanleitung

Konica Minolta

Konica Minolta PK-511 Bedienungsanleitung

Konica Minolta

Konica Minolta DF-704 Bedienungsanleitung

Konica Minolta

Konica Minolta RU-513 Bedienungsanleitung

Konica Minolta

Konica Minolta EK-608 Bedienungsanleitung

Konica Minolta

Konica Minolta Image Controller IC-205 Bedienungsanleitung

Konica Minolta

Konica Minolta DK-510 Bedienungsanleitung

Konica Minolta

Konica Minolta FS-110 Bedienungsanleitung

Konica Minolta

Konica Minolta PI-505 Bedienungsanleitung

Konica Minolta

Konica Minolta HT-502 Bedienungsanleitung

Konica Minolta

Konica Minolta WT-513 Bedienungsanleitung

Konica Minolta

Konica Minolta AD-509 Bedienungsanleitung

Konica Minolta

Konica Minolta KIP Color 80 Bedienungsanleitung

Konica Minolta

Konica Minolta FS-503 Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 5550 Bedienungs- und Wartungsanleitung

Konica Minolta

Konica Minolta FS-532 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C650 Series Bedienungsanleitung

Beliebte Druckerzubehör Handbücher anderer Marken

Star Micronics

Star Micronics TSP800 Series Bedienungsanleitung

REA

REA JET HR pro 2K Bedienungsanleitung

HP Laserjet,Color Laserjet 4si Bedienungsanleitung

oliser

oliser MS 45 Bedienungsanleitung

Roland

Roland DU2-64 Anleitungen und Rezepte

Xerox

Xerox EFI EXP6000 Bedienungsanleitung

Canon

Canon Finisher-T1 Bedienungsanleitung

Sharp

Sharp FO-1MK Bedienungsanleitung

Labelmate

Labelmate PM-300 Bedienungsanleitung

Epson

Epson T6248 Betriebsanleitung

Epson

Epson OT-BZ20 Bedienungsanleitung

Canon

Canon TonerRobot EP-27 Bedienungsanleitung

Ricoh

Ricoh LCIT RT5100 Kurzanleitung

GBC

GBC 16 Series Bedienungsanleitung

Canon

Canon INNER 2-WAY TRAY-E1 Bedienungs- und Wartungshandbuch

Develop

Develop SD-509 Bedienungsanleitung

Kyocera

Kyocera KM-6230 Handbuch

Triumph Adler

Triumph Adler DF-710 Handbuch