Konica Minolta Accuriopress c6100 Bedienungsanleitung

This manual describes the basic use of the automatic inspection function, which

automatically checks the printing quality.

These brackets indicate the name of a key on the touch panel or of a button on a

computer screen.

Words in bold type indicate the name of a key on the control panel, of a part, of

an option, or of User's Guide.

This symbol indicates that negligence of the instructions may lead to mishandling that may cause injury

or property damage.

-This symbol indicates information that complements the topic or optional devices required to use a

certain function.

Notations and symbols used in this manual

CAUTION

The meaning of other notations and symbols are as follows.

Notation/Symbol Description

[ ]

Bold

This guide describes product names and system configurations as follows.

Product name Conventions used in this guide

AccurioPress

C6100/C6085/

C3080/C3080P/

C83hc/C3070

This machine: Indicates the entire system including options and functions.

The main body: Indicates a main unit that covers printing functions.

The machine: Indicates a mechanical part related to the structure or mechanism.

Microsoft Windows Windows

Aim of this manual

Automatic Inspection Operation Manual Contents-1

Table of contents

1 Overview of Function

1.1 What is Automatic Inspection?...................................................................................................... 1-2

2 Automatic Inspection Setting

2.1 Presetting the Details of Automatic Inspection ........................................................................... 2-2

2.1.1 About the Detailed Setting of Automatic Inspection...........................................................................2-2

2.1.2 [Automatic Inspection Level Setting] ..................................................................................................2-4

2.1.3 [Automatic Inspection NIC Setting].....................................................................................................2-5

2.1.4 [Memory Status]..................................................................................................................................2-6

2.1.5 [Security Setting (UK-301)]..................................................................................................................2-7

2.1.6 Automatic Inspection Notification.......................................................................................................2-8

2.1.7 [Error Image Store Setting (UK-301)] ..................................................................................................2-9

2.2 Checking the Automatic Inspection Level.................................................................................. 2-10

3 Performing Automatic Inspection

3.1 Creating a New Reference Image for Automatic Inspection ...................................................... 3-2

3.2 Selecting the Created Reference Image for Automatic Inspection ........................................... 3-6

3.3 Creating a New Reference Image for Automatic Inspection Using a Wait Setting Job......... 3-10

3.4 Selecting a Created Reference Image for Automatic Inspection Using a Wait Setting

Job.................................................................................................................................................. 3-12

4 Automatic Inspection Report

4.1 Confirming the Automatic Inspection Report .............................................................................. 4-2

4.2 Viewing the report from the machine............................................................................................ 4-3

Procedure ...........................................................................................................................................4-3

4.3 Viewing the report via Web Utilities of the Auto Inspection Unit UK-301.................................. 4-8

Procedure ...........................................................................................................................................4-8

How to check the automatic inspection report...................................................................................4-9

[Summary].........................................................................................................................................4-10

[Machine Information] .......................................................................................................................4-11

[Job Information] ...............................................................................................................................4-11

[Auto Inspection Level Detailed Setting] ...........................................................................................4-11

[Failure Details]..................................................................................................................................4-12

[Counting by detection level] ............................................................................................................4-12

Out of range ......................................................................................................................................4-13

4.4 Checking the Automatic Inspection Report in PDF................................................................... 4-14

Overview ...........................................................................................................................................4-14

5 Real-time Inspection Display

5.1 Confirming the Inspection Result in Real Time............................................................................ 5-2

Procedure ...........................................................................................................................................5-2

6 Reference Image

6.1 Managing Reference Images ......................................................................................................... 6-2

Automatic Inspection Operation Manual Contents-2

7 Automatic Inspection Area

7.1 What Is the Automatic Inspection Area? ...................................................................................... 7-2

Overview .............................................................................................................................................7-2

Inspection Excluding Area ..................................................................................................................7-2

Barcode Area ......................................................................................................................................7-2

Serial No. (0-9) Area............................................................................................................................7-3

Specified Inspection Level Area..........................................................................................................7-3

7.2 Setting an Inspection Area............................................................................................................. 7-3

8 Output Setting

8.1 Outputting a Printout with an Error Detected to Another Tray................................................... 8-2

Overview .............................................................................................................................................8-2

Procedure ...........................................................................................................................................8-3

8.2 Outputting a Printout with an Error Detected to the Same Tray ................................................ 8-5

Overview .............................................................................................................................................8-5

Procedure ...........................................................................................................................................8-5

8.3 Decoding the Barcode Area or Serial No. (0-9) Area to Check the Contents ........................... 8-8

Overview .............................................................................................................................................8-8

Procedure (Creating a Reference Image)............................................................................................8-8

Procedure (Setting an Inspection Area) ............................................................................................8-11

Procedure (Decoding) .......................................................................................................................8-12

8.4 Performing Sequential Check for the Barcode Area or Serial No. (0-9) Area ......................... 8-14

Overview ...........................................................................................................................................8-14

Procedure (Creating a Reference Image)..........................................................................................8-14

Procedure (Setting an Inspection Area) ............................................................................................8-14

Procedure (Decoding) .......................................................................................................................8-16

8.5 Variable Data Inspection Function .............................................................................................. 8-17

Overview ...........................................................................................................................................8-17

Procedure (Preparing the CSV File to Collate)..................................................................................8-17

Procedure (Uploading a CSV File) ....................................................................................................8-19

Procedure (Holding a Print Job before Execution) ...........................................................................8-20

Procedure (Checking the Collation Result after Printing) .................................................................8-20

9 Troubleshooting

9.1 If an Out-of-Range Image is Detected.......................................................................................... 9-2

Out-of-range image report status and remedy...................................................................................9-2

1Overview of Function

1.1 What is Automatic Inspection? 1

Automatic Inspection Operation Manual 1-2

1 Overview of Function

1.1 What is Automatic Inspection?

This function uses the sensor to automatically detect image dirt that occurs during printing, and removes

problematic output paper.

It reduces inspection work costs and provides an efficient printing process.

Tips

-The paper size available for automatic inspection is the same as for the Intelligent Quality Optimizer

IQ-501, excluding the banner paper size of length 487.8 mm or more.

NOTICE

To use this function, the following optional units are required.

Intelligent Quality Optimizer IQ-501

Video Interface Kit VI-511

Auto Inspection Unit UK-301

Video Interface Kit VI-513

Relay Unit RU-702

The following optional unit is required to use the real-time VDP collation function during printing.

Variable Data Inspection Kit UK-312

NOTICE

Turn ON the power switch of Auto Inspection Unit UK-301, and turn ON the sub power switch of this ma-

chine.

The power source of the Auto Inspection Unit UK-301 is synchronized with the sub power switch of this

machine. When you turn OFF the sub power switch of this machine, you do not need to turn OFF the power

switch of the Auto Inspection Unit UK-301.

(1) Create a reference

image with Proof Print. (3) Compare images.

Problematic output paper

is detected automatically,

and reprinting is

performed. Then, paper in

the machine is output

completely, so a page

order error involving

output paper does not

occur.

(4) Create an automatic

inspection report.

You can check the

inspection result.

Reference image

Inspection image

(2) Normal printing

Automatic Inspection Operation Manual 1-3

1.1 What is Automatic Inspection? 1

When you forcibly turn OFF the main power switch of this machine, also turn OFF the power switch of the

Auto Inspection Unit UK-301.

For details on the default administrator password, refer to [Safety Information] in the separate volume.

2Automatic Inspection Setting

Automatic Inspection Operation Manual 2-2

2.1 Presetting the Details of Automatic Inspection 2

2 Automatic Inspection Setting

2.1 Presetting the Details of Automatic Inspection

2.1.1 About the Detailed Setting of Automatic Inspection

Determine the basic settings and operation settings for automatic inspection.

To configure the settings, follow one of the procedures below.

-[Utility] - [User Setting] or [Administrator Setting] - [Common Setting]

-[IQ Function Setting] on the [MACHINE] screen

Setting item Description

[Operation after Deviation/Out of Range was De-

tected]

Specify the operation to be performed when inap-

propriate output paper is detected.

You can specify whether to stop this machine im-

mediately or only when the number of detected er-

rors exceeds the standard.

* When the standard value for the number of de-

tected errors is set to "0", this machine will not stop

even if the number of detection increases.

2.1 Presetting the Details of Automatic Inspection 2

Automatic Inspection Operation Manual 2-3

NOTICE

[Reference Image Automatic Deletion] is set to [ON] by default. When you do not want to automatically delete

a reference image, set to [OFF].

[Partition Paper when Deviation/Out of Range was

Detected]

Configure a setting to insert partition paper when

inappropriate output paper is detected.

When inserting, select the paper tray to load parti-

tion paper into.

[Automatic Reprint when Deviation/Out of Range

was Detected]

Configure a setting to perform reprinting when in-

appropriate output paper is detected. When re-

printing is performed, paper in the machine is

output once, so a page order error involving output

paper does not occur.

[Output Tray for Out of Range] Specify the tray to output paper that does not sat-

isfy the standard. You can combine the Purge Tray

of the Relay Unit RU-702 with a sub tray of the op-

tional output unit mounted later, and also select the

same tray for a job.

* Paper cannot be output to the sub tray of Folding

Unit FD-503, Large Capacity Stacker LS-506, or

Saddle Stitcher SD-506. Also, paper cannot be

output to the sub tray of Saddle Stitcher SD-513

when the Multi Tri-Fold, Fold & Staple, or Half-Fold

mode is being used.

* When a paper output enabled option is not con-

nected to Relay Unit RU-702 or later, the button of

[RU702 + Sub tray] is grayed out.

[Create Auto Inspection Report] Configure a setting to create an automatic inspec-

tion result report.

When inappropriate output paper is not discharged

automatically, the user deals with the inappropriate

output paper based on the report.

[Create Report of Completed Job] Configure a setting to create an inspection result

report of the Completed Job.

[Automatic Inspection Level Setting] Adjust the detection standard for automatic in-

spection. There are three levels: [Essential], [Stand-

ard], and [Premium], for each of which you can

adjust the detection standard. Configure a setting

to create an inspection result report of the Com-

pleted Job. You can also set the detection stand-

ard of [Custom]. For details, refer to "2.1.2

[Automatic Inspection Level Setting]" in this manu-

al.

[Wait Screen for Automatic Inspection] Set the automatic inspection on the Wait screen.

When outputting a print job for Direct Print and

such without temporarily saving it, input the job in

Wait mode; you can set the automatic inspection.

* This option is not displayed when Image Control-

ler IC-313, Image Controller IC-314, Image Con-

troller IC-315 or Image Controller IC-417 is

mounted on the machine.

[Reference Image Automatic Deletion] Configure a setting to automatically delete the ref-

erence image that is created for automatic inspec-

tion. When the amount of available reference image

memory is not sufficient, the reference image of the

oldest update date and time in [Reference Image

List 1] is deleted automatically.

[Setting for Inspect. of Excluded Areas] Set the default of the Inspection Excluding Area.

[Counted Error by Each Level] Counts the detected stains and omissions by level,

and displays the results in the automatic inspection

result report.

Setting item Description

Andere Handbücher für accuriopress c6100

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Konica Minolta Drucker Handbücher

Konica Minolta

Konica Minolta magicolor 7450 Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 8650DN Originalbetriebsanleitung

Konica Minolta

Konica Minolta magicolor 4750EN/4750DN Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 5020i Bedienungsanleitung

Konica Minolta

Konica Minolta AccurioPress 6136 Bedienungsanleitung

Konica Minolta

Konica Minolta PagePro 9100 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 4000P Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 5650EN Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 164 Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB C353P Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 2350 EN Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 7300 Bedienungsanleitung

Konica Minolta

Konica Minolta PAGEPRO 5650EN Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB C3351 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 40P/40PX Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 2490 MF Bedienungsanleitung

Konica Minolta

Konica Minolta DRYPRO SIGMA Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 20P Bedienungsanleitung

Konica Minolta

Konica Minolta PagePro 1300W Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub PRESS C8000 Originalbetriebsanleitung

Konica Minolta

Konica Minolta DF-612 Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 5670EN Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 5430 DL Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 552 Handbuch

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung

Lexmark

Lexmark Infoprint 1332 Bedienungsanleitung

Konica Minolta accuriopress c6100 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken