Konica Minolta BIZHUB 500 Bedienungsanleitung

Andere Handbücher für BIZHUB 500

13

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere Konica Minolta Drucker Handbücher

Konica Minolta

Konica Minolta Magicolor 7300 Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 2490 MF Handbuch

Konica Minolta

Konica Minolta bizhub 36 Handbuch

Konica Minolta

Konica Minolta magicolor 1650EN Originalbetriebsanleitung

Konica Minolta

Konica Minolta AccurioPress C4080 Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 3730DN Montageanleitung

Konica Minolta

Konica Minolta magicolor 3730DN Bedienungsanleitung

Konica Minolta

Konica Minolta A0VD011 Originalbetriebsanleitung

Konica Minolta

Konica Minolta BIZHUB C3351 Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 7300 Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 7450 Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 2500W Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub PRO 951 Installationshandbuch

Konica Minolta

Konica Minolta KIP 9900 Bedienungsanleitung

Konica Minolta

Konica Minolta PAGEPRO 5650EN Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 7450 Kurzanleitung

Konica Minolta

Konica Minolta PagePro 1300W Bedienungsanleitung

Konica Minolta

Konica Minolta Di1610 Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 7450 Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 3300 Bedienungsanleitung

Konica Minolta

Konica Minolta DF-612 Bedienungsanleitung

Konica Minolta

Konica Minolta IP-421 Anleitung zur Verwendung

Konica Minolta

Konica Minolta Magicolor 2450 Kurzanleitung

Konica Minolta

Konica Minolta Printer Copier Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung

SERVICE MANUAL

2006.02

Ver. 1.0

Theory of Operation

500

/

420

i

THEORY OF OPERATION TOTAL CONTENTS

SAFETY AND IMPORTANT WARNING ITEMS ..............................................................S-1

IMPORTANT NOTICE ................................................................................................S-1

DESCRIPTION ITEMS FOR DANGER, WARNING AND CAUTION .........................S-1

SAFETY WARNINGS .................................................................................................S-2

SAFETY INFORMATION ...............................................................................................S-12

IMPORTANT NOTICE ..............................................................................................S-12

INDICATION OF WARNING ON THE MACHINE .....................................................S-13

MEASURES TO TAKE IN CASE OF AN ACCIDENT ....................................................S-15

Composition of the service manual ................................................................................. C-1

Notation of the service manual ....................................................................................... C-2

bizhub 500 / 420 Main Body

OUTLINE ........................................................................................................................ 1

COMPOSITION/OPERATION ........................................................................................ 9

* For particulars, see the contents of the main body.

DF-607

OUTLINE ........................................................................................................................ 1

COMPOSITION/OPERATION......................................................................................... 5

* For particulars, see the contents of DF-607.

PC-202

OUTLINE ........................................................................................................................ 1

COMPOSITION/OPERATION......................................................................................... 3

* For particulars, see the contents of PC-202.

PC-402

OUTLINE ........................................................................................................................ 1

COMPOSITION/OPERATION......................................................................................... 3

* For particulars, see the contents of PC-402.

LU-201

OUTLINE ........................................................................................................................ 1

COMPOSITION/OPERATION ........................................................................................ 3

* For particulars, see the contents of LU-201.

ii

FS-510/PU-501/OT-601

OUTLINE ........................................................................................................................ 1

COMPOSITION/OPERATION ........................................................................................ 9

* For particulars, see the contents of FS-510/PU-501/OT-601.

FS-511/RU-502

OUTLINE ........................................................................................................................ 1

COMPOSITION/OPERATION........................................................................................ 7

* For particulars, see the contents of FS-511/RU-502.

SD-502

OUTLINE ........................................................................................................................ 1

COMPOSITION/OPERATION ........................................................................................ 3

* For particulars, see the contents of SD-502.

MT-501

OUTLINE ........................................................................................................................ 1

COMPOSITION/OPERATION ........................................................................................ 3

* For particulars, see the contents of MT-501.

JS-502

OUTLINE ........................................................................................................................ 1

COMPOSITION/OPERATION ........................................................................................ 3

* For particulars, see the contents of JS-502.

SAFETY AND IMPORTANT WARNING ITEMS

S-1

Read carefully the Safety and Important Warning Items described below to understand

them before doing service work.

Because of possible hazards to an inexperienced person servicing this product as well as

the risk of damage to the product, Konica Minolta Business Technologies, INC. (hereafter

called the KMBT) strongly recommends that all servicing be performed only by KMBT-

trained service technicians.

Changes may have been made to this product to improve its performance after this Service

Manual was printed. Accordingly, KMBT does not warrant, either explicitly or implicitly, that

the information contained in this Service Manual is complete and accurate.

The user of this Service Manual must assume all risks of personal injury and/or damage to

the product while servicing the product for which this Service Manual is intended.

Therefore, this Service Manual must be carefully read before doing service work both in the

course of technical training and even after that, for performing maintenance and control of

the product properly.

Keep this Service Manual also for future service.

In this Service Manual, each of three expressions " DANGER", " WARNING", and

"CAUTION" is defined as follows together with a symbol mark to be used in a limited

meaning.

When servicing the product, the relevant works (disassembling, reassembling, adjustment,

repair, maintenance, etc.) need to be conducted with utmost care.

Symbols used for safety and important warning items are defined as follows:

SAFETY AND IMPORTANT WARNING ITEMS

IMPORTANT NOTICE

DESCRIPTION ITEMS FOR DANGER,

WARNING AND CAUTION

DANGER: Action having a high possibility of suffering death or serious injury

WARNING: Action having a possibility of suffering death or serious injury

CAUTION: Action having a possibility of suffering a slight wound, medium

trouble and property damage

:Precaution when using the

copier. General

precaution

Electric hazard High

temperature

:Prohibition when using the

copier. General

prohibition

Do not touch

with wet hand

Do not

disassemble

:Direction when using the

copier. General

instruction

Unplug Ground/Earth

SAFETY AND IMPORTANT WARNING ITEMS

S-2

[1] MODIFICATIONS NOT AUTHORIZED BY KONICA MINOLTA

BUSINESS TECHNOLOGIES, INC.

Konica Minolta brand products are renowned for their high reliability. This reliability is

achieved through high-quality design and a solid service network.

Product design is a highly complicated and delicate process where numerous mechanical,

physical, and electrical aspects have to be taken into consideration, with the aim of arriving

at proper tolerances and safety factors. For this reason, unauthorized modifications involve

a high risk of degradation in performance and safety. Such modifications are therefore

strictly prohibited. The points listed below are not exhaustive, but they illustrate the reason-

ing behind this policy.

SAFETY WARNINGS

Prohibited Actions

DANGER

• Using any cables or power cord not specified by KMBT.

• Using any fuse or thermostat not specified by KMBT.

Safety will not be assured, leading to a risk of fire and

injury.

• Disabling fuse functions or bridging fuse terminals with

wire, metal clips, solder or similar object.

• Disabling relay functions (such as wedging paper between

relay contacts)

• Disabling safety functions (interlocks, safety circuits, etc.)

Safety will not be assured, leading to a risk of fire and

injury.

• Making any modification to the product unless instructed

by KMBT

• Using parts not specified by KMBT

SAFETY AND IMPORTANT WARNING ITEMS

S-3

[2] POWER PLUG SELECTION

In some countries or areas, the power plug provided with the product may not fit wall outlet

used in the area. In that case, it is obligation of customer engineer (hereafter called the CE)

to attach appropriate power plug or power cord set in order to connect the product to the

supply.

Power Cord Set or Power Plug

WARNING

• Use power supply cord set which meets the following

criteria:

- provided with a plug having configuration intended for

the connection to wall outlet appropriate for the prod-

uct's rated voltage and current, and

- the plug has pin/terminal(s) for grounding, and

- provided with three-conductor cable having enough cur-

rent capacity, and

- the cord set meets regulatory requirements for the area.

Use of inadequate cord set leads to fire or electric shock.

• Attach power plug which meets the following criteria:

- having configuration intended for the connection to wall

outlet appropriate for the product's rated voltage and

current, and

- the plug has pin/terminal(s) for grounding, and

- meets regulatory requirements for the area.

Use of inadequate cord set leads to the product connect-

ing to inadequate power supply (voltage, current capacity,

grounding), and may result in fire or electric shock.

• Conductors in the power cable must be connected to ter-

minals of the plug according to the following order:

• Black or Brown: L (line)

• White or Light Blue: N (neutral)

• Green/Yellow: PE (earth)

Wrong connection may cancel safeguards within the

product, and results in fire or electric shock.

AC230V

AC208V 240V

SAFETY AND IMPORTANT WARNING ITEMS

S-4

[3] CHECKPOINTS WHEN PERFORMING ON-SITE SERVICE

Konica Minolta brand products are extensively tested before shipping, to ensure that all

applicable safety standards are met, in order to protect the customer and CE from the risk

of injury. However, in daily use, any electrical equipment may be subject to parts wear and

eventual failure. In order to maintain safety and reliability, the CE must perform regular

safety checks.

1. Power Supply

Connection to Power Supply

WARNING

• Check that mains voltage is as specified.

Connection to wrong voltage supply may result in fire or

electric shock.

• Connect power plug directly into wall outlet having same

configuration as the plug.

Use of an adapter leads to the product connecting to

inadequate power supply (voltage, current capacity,

grounding), and may result in fire or electric shock.

If proper wall outlet is not available, advice the customer

to contact qualified electrician for the installation.

• Plug the power cord into the dedicated wall outlet with a

capacity greater than the maximum power consumption.

If excessive current flows in the wall outlet, fire may

result.

• If two or more power cords can be plugged into the wall

outlet, the total load must not exceed the rating of the wall

outlet.

If excessive current flows in the wall outlet, fire may

result.

• Make sure the power cord is plugged in the wall outlet

securely.

Contact problems may lead to increased resistance,

overheating, and the risk of fire.

? V

kw

SAFETY AND IMPORTANT WARNING ITEMS

S-5

• Check whether the product is grounded properly.

If current leakage occurs in an ungrounded product, you

may suffer electric shock while operating the product.

Connect power plug to grounded wall outlet.

Connection to Power Supply

WARNING

Power Plug and Cord

WARNING

• When using the power cord set (inlet type) that came with

this product, make sure the connector is securely inserted

in the inlet of the product.

When securing measure is provided, secure the cord with

the fixture properly.

If the power cord (inlet type) is not connected to the prod-

uct securely, a contact problem may lead to increased

resistance, overheating, and risk of fire.

• Check whether the power cord is not stepped on or

pinched by a table and so on.

Overheating may occur there, leading to a risk of fire.

• Check whether the power cord is damaged. Check

whether the sheath is damaged.

If the power plug, cord, or sheath is damaged, replace

with a new power cord or cord set (with plug and connec-

tor on each end) specified by KMBT.

Using the damaged power cord may result in fire or elec-

tric shock.

• Do not bundle or tie the power cord.

Overheating may occur there, leading to a risk of fire.

SAFETY AND IMPORTANT WARNING ITEMS

S-6

• Check whether dust is collected around the power plug

and wall outlet.

Using the power plug and wall outlet without removing

dust may result in fire.

• Do not insert the power plug into the wall outlet with a wet

hand.

The risk of electric shock exists.

• When unplugging the power cord, grasp the plug, not the

cable.

The cable may be broken, leading to a risk of fire and

electric shock.

Power Plug and Cord

WARNING

Wiring

WARNING

• Never use multi-plug adapters to plug multiple power cords

in the same outlet.

If used, the risk of fire exists.

• When an extension cord is required, use a specified one.

Current that can flow in the extension cord is limited, so

using a too long extension cord may result in fire.

Do not use an extension cable reel with the cable taken

up. Fire may result.

SAFETY AND IMPORTANT WARNING ITEMS

S-7

2. Installation Requirements

Prohibited Installation Places

WARNING

• Do not place the product near flammable materials or vola-

tile materials that may catch fire.

A risk of fire exists.

• Do not place the product in a place exposed to water such

as rain.

A risk of fire and electric shock exists.

When not Using the Product for a long time

WARNING

• When the product is not used over an extended period of

time (holidays, etc.), switch it off and unplug the power

cord.

Dust collected around the power plug and outlet may

cause fire.

Ventilation

CAUTION

• The product generates ozone gas during operation, but it

will not be harmful to the human body.

If a bad smell of ozone is present in the following cases,

ventilate the room.

a. When the product is used in a poorly ventilated room

b. When taking a lot of copies

c. When using multiple products at the same time

Fixing

CAUTION

• Be sure to lock the caster stoppers.

In the case of an earthquake and so on, the product may

slide, leading to a injury.