Konig CMP-WNAP10 Bedienungsanleitung
CMP-WNAP10
Wireless Access Point
MANUAL
ANLEITUNG
MODE D’EMPLOI
GEBRUIKSAANWIJZING
MANUALE
MANUAL DE USO
HASZNÁLATI ÚTMUTATÓ
KÄYTTÖOHJE
BRUKSANVISNING
NÁVOD K POUŽITÍ
1
Set Up:
1. First, connect the power adapter to the receptor at the back
panel of the CMP-WNAP10 and then plug the other end of the
power adapter to a wall outlet or power strip. The POWER LED
will turn ON to indicate proper operation.
2. Secondly, using an Ethernet cable, insert one end of the cable to
the LAN port on the back panel of the CMP-WNAP10 and the
other end of the cable to a switch/router/modem. The LAN LED
light will illuminate to indicate a proper Ethernet connection.
Tips: The LAN Port on the CMP-WNAP10 is Auto MDI/MDI-X that
means you can use a straight-through or crossover cable to the LAN
Port.
3. By now, with default factory settings, your wireless adapter
should connect to the CMP-WNAP10 AP automatically as shown
below.
English Deutsch Français Nederlands
Italiano Español Magyar Suomi Svenska Česky
2
Default CMP-WNAP10 Settings:
http://192.168.1.1
User Name: admin
Password: admin
SSID: WNAP10
Channel: 11
Operational Mode: Access Point
For advanced settings and modifying factory default settings, please
refer to the manual on the CD which is enclosed in the packaging.
DECLARATION OF CONFORMITY
We declare under our responsibility that the product;
Brand name: KÖNIG
Model: CMP-WNAP10
Description: Wireless Access Point
Is in conformity with the following standards;
Radio: EN 300 328 V1.6.1:2004
EMC: EN 301 489-17 V1.2.1:2002
LVD: EN 60950-1:2001
Following the provisions of the 1999/5/EC R&TTE Directive. Conform
this regulation it’s allowed to use this product in all European Community
& EFTA countries.
We are not responsible for the use of this product outside the European
Community & EFTA countries.
Safety precautions:
To reduce risk of electric shock, this product should ONLY be opened by an
authorized technician when service is required. Disconnect the product from
mains and other equipment if a problem should occur.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of
the product or damage caused due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
Copyright ©
EnglishDeutschFrançaisNederlands
ItalianoEspañolMagyarSuomiSvenskaČesky
Andere Handbücher für CMP-WNAP10
1
Inhaltsverzeichnis
Andere Konig Drahtloser Zugangspunkt Handbücher
Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken
D-Link
D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung
Ubiquiti
Ubiquiti NanoStation NSM2 Bedienungsanleitung
Cisco
Cisco Aironet 1550 Series Bedienungsanleitung
Aruba
Aruba IAP-335 Bedienungsanleitung
Advantek Networks
Advantek Networks AWN-AP-54MR Bedienungsanleitung
IP-COM
IP-COM AP355 Bedienungsanleitung
Buffalo
Buffalo AirStation WLA-L11G Bedienungsanleitung
EnGenius
EnGenius EnStationACv2 Bedienungsanleitung
D-Link
D-Link DAP-3662 Bedienungsanleitung
xG Technology
xG Technology xMax CN1300 Bedienungsanleitung
Widelink
Widelink ezWave WAP-1100 Series Bedienungsanleitung
Edimax
Edimax CAP1200 Bedienungsanleitung
