Kontron CP3002 Bedienungsanleitung

If it’s embedded, it’s Kontron.

» User Guide «

P R E L I M I N A R Y

CP3002

3U CompactPCI Processor Board based on

the Intel® Core™ i7 Processor with

the Intel® QM57 Chipset

Doc. ID: 1042-9252, Rev. 2.0

July 27, 2012

Preface CP3002

Page ii ID 1042-9252, Rev. 2.0

P R E L I M I N A R Y

Revision History

Imprint

Kontron Modular Computers GmbH may be contacted via the following:

MAILING ADDRESS TELEPHONE AND E-MAIL

Kontron Europe GmbH +49 (0) 800-SALESKONTRON

Sudetenstraße 7 [email protected]

D - 87600 Kaufbeuren Germany

For further information about other Kontron products, please visit our Internet web site:

www.kontron.com.

Disclaimer

not guaranteed for legal purposes. Information has been carefully checked and is believed to

be accurate; however, no responsibility is assumed for inaccuracies. Kontron and the Kontron

logo and all other trademarks or registered trademarks are the property of their respective own-

ers and are recognized. Specifications are subject to change without notice.

Publication Title: CP3002: 3U CompactPCI Processor Board based on the Intel® Core™

i7 Processor with the Intel® QM57 Chipset

Doc. ID: 1042-9252

Rev. Brief Description of Changes Date of Issue

1.0 Initial issue 19-Jan-2011

2.0 General update, added description for the Intel® Core™ i7-660UE

and the Intel® Celeron® U3405 processors. 27-Jul-2012

CP3002 Preface

ID 1042-9252, Rev. 2.0 Page iii

P R E L I M I N A R Y

Table of Contents

Revision History .........................................................................................................ii

Imprint ........................................................................................................................ii

Disclaimer ..................................................................................................................ii

Table of Contents ......................................................................................................iii

List of Tables .............................................................................................................ix

List of Figures .........................................................................................................xiii

Proprietary Note .......................................................................................................xv

Trademarks ..............................................................................................................xv

Environmental Protection Statement ........................................................................xv

Explanation of Symbols ..........................................................................................xvi

For Your Safety ......................................................................................................xvii

High Voltage Safety Instructions ........................................................................xvii

Special Handling and Unpacking Instructions ...................................................xvii

General Instructions on Usage ............................................................................. xviii

Two Year Warranty ..................................................................................................xix

1. Introduction ............................................................................. 1 - 3

1.1 Board Overview .......................................................................................1 - 3

1.2 Board-Specific Information ......................................................................1 - 4

1.3 System Expansion Capabilities ...............................................................1 - 5

1.3.1 CP3002-HDD Module .....................................................................1 - 5

1.3.2 CP-RIO3-04 Rear I/O Module .........................................................1 - 5

1.3.3 Serial ATA Flash Module ................................................................1 - 5

1.4 Board Diagrams ......................................................................................1 - 5

1.4.1 Functional Block Diagram ...............................................................1 - 6

1.4.2 Front Panel .....................................................................................1 - 7

1.4.3 Board Layout ..................................................................................1 - 8

1.5 Technical Specification ............................................................................1 - 9

1.6 Standards ..............................................................................................1 - 15

1.7 Related Publications .............................................................................1 - 18

2. Functional Description ........................................................... 2 - 3

2.1 Processor ................................................................................................2 - 3

Preface CP3002

Page iv ID 1042-9252, Rev. 2.0

P R E L I M I N A R Y

2.2 Memory ....................................................................................................2 - 4

2.3 Intel® QM57 Express Chipset .................................................................2 - 5

2.4 Timer ........................................................................................................2 - 5

2.5 Watchdog Timer ......................................................................................2 - 6

2.6 Battery .....................................................................................................2 - 6

2.7 Reset .......................................................................................................2 - 6

2.8 Flash Memory ..........................................................................................2 - 6

2.8.1 SPI Boot Flash for uEFI BIOS .........................................................2 - 6

2.8.2 Serial ATA Flash Module (Optional) ................................................2 - 7

2.9 8HP Expansion Module ...........................................................................2 - 7

2.10 Trusted Platform Module 1.2 (On Request) .............................................2 - 7

2.11 Board Interfaces ......................................................................................2 - 8

2.11.1 Front Panel LEDs ............................................................................2 - 8

2.11.1.1 Watchdog and Temperature Status LEDs ...............................2 - 8

2.11.1.2 General Purpose LEDs ...........................................................2 - 9

2.11.2 DIP Switch SW1 ............................................................................2 - 10

2.11.3 USB Interfaces ..............................................................................2 - 11

2.11.3.1 Front Panel USB Connectors J9 and J10 .............................2 - 11

2.11.4 Integrated Graphics Controller ......................................................2 - 11

2.11.4.1 Graphics Memory Usage ......................................................2 - 12

2.11.4.2 VGA Analog Interface and Connector J6 ..............................2 - 12

2.11.5 Serial Ports ....................................................................................2 - 13

2.11.6 Gigabit Ethernet ............................................................................2 - 13

2.11.7 Serial ATA Interfaces .....................................................................2 - 15

2.11.7.1 Serial ATA Connector J3 .......................................................2 - 15

2.11.8 Debug Interface .............................................................................2 - 16

2.11.9 CompactPCI Interface ...................................................................2 - 16

2.11.9.1 Board Functionality when Installed in System Controller Slot 2 - 16

2.11.9.2 Board Functionality when Installed in Peripheral Slot ...........2 - 16

2.11.9.3 Front/Rear I/O Configuration ................................................2 - 16

2.11.9.4 Board Insertion/Replacement under Power .........................2 - 17

2.11.9.5 Power Ramping ....................................................................2 - 17

2.11.9.6 ENUM# Interrupt ...................................................................2 - 17

2.11.10 CompactPCI Connectors J1 and J2 ..............................................2 - 18

CP3002 Preface

ID 1042-9252, Rev. 2.0 Page v

P R E L I M I N A R Y

2.11.10.1 CompactPCI Connector Keying ...........................................2 - 18

2.11.10.2 CompactPCI Connectors J1 and J2 Pinouts ........................2 - 19

2.11.10.3 Optional Rear I/O Interface ..................................................2 - 22

2.11.10.4 Rear I/O Pin Description ......................................................2 - 25

3. Installation ............................................................................... 3 - 3

3.1 Safety Requirements ...............................................................................3 - 3

3.2 Initial Installation Procedures ..................................................................3 - 4

3.3 Standard Removal Procedures ...............................................................3 - 5

3.4 Insertion/Removal under Power .............................................................3 - 6

3.4.1 Replacement under Power in Peripheral Slot .................................3 - 6

3.5 Installation of CP3002 Peripheral Devices ..............................................3 - 9

3.5.1 USB Device Installation ................................................................3 - 10

3.5.2 Installation of External Serial ATA Devices ...................................3 - 10

3.5.3 SATA Flash Module Installation ....................................................3 - 10

3.5.4 2.5” HDD/SSD Installation ............................................................3 - 10

3.5.5 CFast Card Installation ................................................................. 3 - 11

3.5.6 Rear I/O Device Installation .......................................................... 3 - 11

3.5.7 Battery Replacement ....................................................................3 - 12

3.6 Software Installation ..............................................................................3 - 12

4. Configuration ........................................................................... 4 - 3

4.1 DIP Switch Configuration ........................................................................4 - 3

4.2 Jumper Description .................................................................................4 - 4

4.2.1 I/O Address Map .............................................................................4 - 4

4.3 CP3002-Specific Registers .....................................................................4 - 5

4.3.1 Status Register 0 (STAT0) ..............................................................4 - 5

4.3.2 Status Register 1 (STAT1) ..............................................................4 - 6

4.3.3 Control Register 0 (CTRL0) ............................................................4 - 6

4.3.4 Control Register 1 (CTRL1) ............................................................4 - 7

4.3.5 Device Protection Register (DPROT) .............................................4 - 8

4.3.6 Reset Status Register (RSTAT) ......................................................4 - 9

4.3.7 Board Interrupt Configuration Register (BICFG) ...........................4 - 10

Preface CP3002

Page vi ID 1042-9252, Rev. 2.0

P R E L I M I N A R Y

4.3.8 Status Register 2 (STAT2) .............................................................4 - 11

4.3.9 Board ID High Byte Register (BIDH) .............................................4 - 11

4.3.10 Board and PLD Revision Register (BREV) ...................................4 - 12

4.3.11 Geographic Addressing Register (GEOAD) ..................................4 - 12

4.3.12 Watchdog Timer Control Register (WTIM) ....................................4 - 13

4.3.13 Board ID Low Byte Register (BIDL) ..............................................4 - 15

4.3.14 LED Configuration Register (LCFG) .............................................4 - 16

4.3.15 LED Control Register (LCTRL) .....................................................4 - 17

4.3.16 General Purpose Output Register (GPOUT) .................................4 - 18

4.3.17 General Purpose Input Register (GPIN) .......................................4 - 19

5. Power Considerations .............................................................5 - 3

5.1 System Power ..........................................................................................5 - 3

5.1.1 CP3002 Baseboard .........................................................................5 - 3

5.1.2 Backplane .......................................................................................5 - 4

5.1.3 Power Supply Units .........................................................................5 - 4

5.1.3.1 Start-Up Requirement .............................................................5 - 4

5.1.3.2 Power-Up Sequence ...............................................................5 - 4

5.1.3.3 Tolerance ................................................................................5 - 5

5.1.3.4 Regulation ...............................................................................5 - 5

5.2 Power Consumption ................................................................................5 - 6

5.3 Power Consumption of CP3002 Accessories ..........................................5 - 8

5.4 Start-Up Currents of the CP3002 .............................................................5 - 8

6. Thermal Considerations .........................................................6 - 3

6.1 Board Internal Thermal Monitoring ..........................................................6 - 3

6.2 Processor Thermal Monitoring .................................................................6 - 3

6.2.1 Digital Thermal Sensor (DTS) .........................................................6 - 3

6.2.2 Adaptive Thermal Monitor ...............................................................6 - 3

6.2.3 Frequency/VID Control ...................................................................6 - 4

6.2.4 Clock Modulation .............................................................................6 - 4

6.2.5 Catastrophic Cooling Failure Sensor ..............................................6 - 4

6.3 Chipset Thermal Monitor Feature ............................................................6 - 5

CP3002 Preface

ID 1042-9252, Rev. 2.0 Page vii

P R E L I M I N A R Y

6.4 External Thermal Regulation ...................................................................6 - 5

6.4.1 Operational Limits for the CP3002 .......................................................6 - 7

6.4.2 Peripherals ......................................................................................6 - 9

A. CP3002-HDD Module ...............................................................A - 3

A.1 Overview .................................................................................................A - 3

A.2 Technical Specifications ..........................................................................A - 4

A.3 CP3002-HDD Module Functional Block Diagram ...................................A - 5

A.4 Front Panel of the 8HP CP3002 with CP3002-HDD Module ..................A - 6

A.5 CP3002-HDD Module Layout ..................................................................A - 7

A.6 Module Interfaces (Front Panel and Onboard) ........................................A - 8

A.6.1 Serial Port .......................................................................................A - 8

A.6.2 USB Interfaces ................................................................................A - 9

A.6.3 DVI-D Interface .............................................................................A - 10

A.6.4 CFast Card Connector ..................................................................A - 11

A.6.5 SATA Interface ..............................................................................A - 12

A.6.6 Battery ..........................................................................................A - 13

B. CP-RIO3-04 Rear I/O Module ..................................................B - 3

B.1 Overview .................................................................................................B - 3

B.2 Technical Specifications ..........................................................................B - 4

B.3 Front Panels ............................................................................................B - 5

B.4 Module Layout: 4HP and 8HP Versions ..................................................B - 6

B.5 Module Interfaces ....................................................................................B - 7

B.5.1 USB Interfaces ................................................................................B - 7

B.5.2 VGA Interface .................................................................................B - 8

B.5.3 Gigabit Ethernet Interface ...............................................................B - 9

B.5.4 COM Interface ..............................................................................B - 10

B.5.5 Peripheral Control Interface ..........................................................B - 11

B.5.6 Serial ATA Interfaces ....................................................................B - 12

B.5.7 Rear I/O Interface on CompactPCI Connector rJ2 .......................B - 13

Preface CP3002

Page viii ID 1042-9252, Rev. 2.0

P R E L I M I N A R Y

C. SATA Flash Module ................................................................ C - 3

C.1 Technical Specifications .........................................................................C - 3

C.2 SATA Flash Module Layout ....................................................................C - 4

CP3002 Preface

ID 1042-9252, Rev. 2.0 Page ix

P R E L I M I N A R Y

List of Tables

1-1 CP3002 Main Specifications ...................................................................... 1 - 9

1-2 Standards ................................................................................................ 1 - 15

1-3 Additional Standards for Boards Ordered with Ruggedized Service ....... 1 - 16

1-4 Add. Standards for CP3002 with Rug. Service and Conformal Coating .. 1 - 17

1-5 Related Publications ................................................................................ 1 - 18

2-2 Supported Memory Configurations ............................................................ 2 - 4

2-1 Features of the Processors Supported on the CP3002 ............................. 2 - 4

2-3 Watchdog and Thermal Status LEDs ........................................................ 2 - 8

2-4 General Purpose LED Function ................................................................. 2 - 9

2-5 POST Code Sequence ............................................................................ 2 - 10

2-6 POST Code Example .............................................................................. 2 - 10

2-7 DIP Switch SW1 Function ....................................................................... 2 - 10

2-8 USB Connectors J9 and J10 Pinout ........................................................ 2 - 11

2-9 D-Sub VGA Connector J6 Pinout ............................................................ 2 - 12

2-10 Dual Gigabit Ethernet Connector J11A/B Pinout ..................................... 2 - 14

2-11 SATA Connector J3 Pinout ...................................................................... 2 - 15

2-12 CompactPCI Connector J1 System Controller Slot Pinout ...................... 2 - 19

2-13 CompactPCI Connector J1 Peripheral Slot Pinout .................................. 2 - 20

2-14 64-bit CompactPCI Connector J2 Pinout (CP3002 Front I/O Vers.) ........ 2 - 21

2-15 Rear I/O CompactPCI Connector J2 Pinout (CP3002 Rear I/O Vers.) .... 2 - 23

2-17 GPIO Signal Description .......................................................................... 2 - 24

2-16 Rear I/O Signal Description ..................................................................... 2 - 24

2-18 COMA and COMB Signal Description ..................................................... 2 - 25

2-19 GPIO Signal Description .......................................................................... 2 - 26

2-20 VGA Signal Description ........................................................................... 2 - 26

2-21 Gigabit Ethernet Signal Description ......................................................... 2 - 27

2-22 Serial ATA Signal Description .................................................................. 2 - 28

2-23 USB Signal Description ........................................................................... 2 - 28

2-24 Power Supply and Power Management Signal Description .................... 2 - 29

4-1 DIP Switch SW1 Functionality ................................................................... 4 - 3

4-2 I/O Address Map ........................................................................................ 4 - 4

4-3 Status Register 0 (STAT0) ......................................................................... 4 - 5

Preface CP3002

Page x ID 1042-9252, Rev. 2.0

P R E L I M I N A R Y

4-4 Status Register 1 (STAT1) .......................................................................... 4 - 6

4-5 Control Register 0 (CTRL0) ....................................................................... 4 - 6

4-6 Control Register 1 (CTRL1) ....................................................................... 4 - 7

4-7 Device Protection Register (DPROT) ......................................................... 4 - 8

4-8 Reset Status Register (RSTAT) .................................................................. 4 - 9

4-9 Board Interrupt Configuration Register (BICFG) ...................................... 4 - 10

4-10 Status Register 2 (STAT2) ........................................................................ 4 - 11

4-11 Board ID High Byte Register (BIDH) ........................................................ 4 - 11

4-12 Board and PLD Revision Register (BREV) .............................................. 4 - 12

4-13 Geographic Addressing Register (GEOAD) ............................................. 4 - 12

4-14 Watchdog Timer Control Register (WTIM) ............................................... 4 - 14

4-15 Board ID Low Byte Register (BIDL) ......................................................... 4 - 15

4-16 LED Configuration Register (LCFG) ........................................................ 4 - 16

4-17 LED Control Register (LCTRL) ................................................................ 4 - 17

4-18 General Purpose Output Register (GPOUT) ............................................ 4 - 18

4-19 General Purpose Input Register (GPIN) .................................................. 4 - 19

5-1 Maximum Input Power Voltage Limits ........................................................ 5 - 3

5-2 DC Operational Input Voltage Ranges ....................................................... 5 - 3

5-3 Input Voltage Characteristics ..................................................................... 5 - 5

5-4 CP3002 in EFI Shell ................................................................................... 5 - 7

5-5 CP3002 with Win. XP and Processor and Graphics in Idle State .............. 5 - 7

5-6 CP3002 with Win. XP and Max. Proc. Workload and Graphics in Idle State 5 - 7

5-7 CP3002 with Win. XP and Max. Processor and Graphics Workload ......... 5 - 7

5-8 Power Consumption of CP3002 Accessories ............................................ 5 - 8

5-9 Start-Up Currents of the CP3002 ............................................................... 5 - 8

A-1 CP3002-HDD Module Specifications ........................................................ A - 4

A-2 Serial Port Connector J5 Pinout ................................................................ A - 8

A-3 USB Connectors J2 and J4 Pinout ............................................................ A - 9

A-4 DVI-D Connector J1 Pinout ..................................................................... A - 10

A-5 CFast Connector J6 Pinout ...................................................................... A - 11

A-6 SATA Connector J3 Pinout ...................................................................... A - 12

B-1 CP-RIO3-04 Rear I/O Module Main Specifications ................................... B - 4

B-2 USB Connectors J11 and J12 Pinout ........................................................ B - 7

B-3 D-Sub VGA Connector J7 Pinout .............................................................. B - 8

Inhaltsverzeichnis

Andere Kontron Computerhardware Handbücher

Kontron

Kontron COMe-cBTi6R E3845 8GB/16S Bedienungsanleitung

Kontron

Kontron AdvancedMC AM4211 Bedienungsanleitung

Kontron

Kontron MITX-CFL0 Series Bedienungsanleitung

Kontron

Kontron SMARC-sAMX8X Bedienungsanleitung

Kontron

Kontron AM4500 Bedienungsanleitung

Kontron

Kontron COMh-caRP Bedienungsanleitung

Kontron

Kontron 104 Bedienungsanleitung

Kontron

Kontron CP6007-SA Bedienungsanleitung

Kontron

Kontron CPCI-MXS Produkthandbuch

Kontron

Kontron ePanel-mgx Bedienungsanleitung

Kontron

Kontron X-Board UPA 63036 Bedienungsanleitung

Kontron

Kontron ePanel-C3 Bedienungsanleitung

Kontron

Kontron CP6005-SA Bedienungsanleitung

Kontron

Kontron Mungo540 Bedienungsanleitung

Kontron

Kontron COM Express Eval 10 Bedienungsanleitung

Kontron

Kontron ADA-SDVO-PEG16 Bedienungsanleitung

Kontron

Kontron MSP8040 Series Bedienungsanleitung

Kontron

Kontron AdvancedTCA AT8001 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Kontron

Kontron ePCI-201 Bedienungsanleitung

Kontron

Kontron 11529 Bedienungsanleitung

Kontron

Kontron CP3003-SA Bedienungsanleitung

Kontron

Kontron MSP8020 Series Bedienungsanleitung

Kontron

Kontron CI5TTV Series Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung

Measurement Computing

Measurement Computing CIO-EXP-RTD16 Bedienungsanleitung

Matrox

Matrox DigiSuite DigiMix Installations- und Betriebsanleitung