Kontron EPCI-201 Bedienungsanleitung

P/N : M8004_INST Page 1 of 1 V 1.0 November 2004

READ ME FIRST

UNPACKING AND SAFETY PRECAUTIONS

Static Electricity

Since static electricity can cause damage to electronic devices, the following precautions should be

taken:

1. Keep the board in its anti-static package, until you are ready to install it.

2. Always touch a grounded surface or wear a grounding wrist strap before removing the board

from its package; this will discharge any static electricity that may have built up in your body.

3. Handle the board by the edges.

Storage Environment

Electronic boards are sensitive devices. Do not handle or store devices near strong electrostatic,

electromagnetic, magnetic or radioactive fields.

Power Supply

Before any installation or setup, ensure that the board is unplugged from power sources or

subsystems.

Unpacking

Follow these recommendations while unpacking:

1. After opening the box, save it as well as the packing material for possible future shipment.

2. Remove the board from its anti-static wrapping and place it on a grounded surface.

3. Inspect the board for damage. If there is any damage or missing items, notify Kontron

immediately.

When unpacking you will find:

1. One ePCI-201 SBC.

2. One CD-ROM containing drivers *

3. One heat sink.

4. One Quick Reference sheet.

5. Cables listed on the order.

6. One mezzanine with two USB connectors, one RCA connector and one video (DB15) connector.

Note:

For latest Technical Reference Manual, Quick Reference Sheet, drivers, BIOS and other

documentation, please consult our web site at: http://www.kontron.com or our FTP site at:

ftp://ftp.kontron.ca/Support

* Note that the Ethernet driver for the 82541ER available on the CD 4.1 is not working

properly. To download the new version, please visit www.kontron.com or

ftp.kontron.ca/support/

P/N : M8004_INST Page 2 of 2 V 1.0 November 2004

CPU and Heatsink Installation

Raise the Socket Actuation Lever up to 90º.

Locate the Pin 1 Notch.

Locate the Pin 1 Notch on the CPU.

Install the CPU onto Socket (match the pin 1 of CPU

with Pin 1 of Socket.

Lower the Socket Actuation Lever.

Remove the protective cover under the heatsink.

Install the CPU Heatsink onto the CPU and clip it to

the retention module.

Activate simultaneously the clips levers in order to

secure the heat sink.

Caution : You must apply pressure equally on both

side of the heatsink when you fasten the side

brackets.

Connect the CPU Fan cable to the CPU fan

connector (J21) located near the Memory Sockets.

IMPORTANT

1. Once the CPU is installed you must handle the board carefully and hold it on the

heatsink side.

2. The CPU Power cable must be installed on connector J22.

If not installed, the board will not start. This 4 wires cable comes from P4 ready power

supply or from the Backplane.

mPGA478B

Pin 1

Notch

Pin 1 Notch

mPGA478B

Inhaltsverzeichnis

Andere Kontron Computerhardware Handbücher

Kontron

Kontron CP3003-SA Bedienungsanleitung

Kontron

Kontron PCI-946-1 Produkthandbuch

Kontron

Kontron COMe-cDC2 Bedienungsanleitung

Kontron

Kontron KBox A-151-TGL Bedienungsanleitung

Kontron

Kontron MOPSlcdGX1 Bedienungsanleitung

Kontron

Kontron CP6016 Bedienungsanleitung

Kontron

Kontron COMe-bID7 Bedienungsanleitung

Kontron

Kontron CP6930 Bedienungsanleitung

Kontron

Kontron BL Pi-Tron CM3+ Bedienungsanleitung

Kontron

Kontron 820951 ADD2-DVI-Dual-Internal Bedienungsanleitung

Kontron

Kontron ETX-CD Bedienungsanleitung

Kontron

Kontron ETX -CN8 Bedienungsanleitung

Kontron

Kontron microETXexpress-SP Bedienungsanleitung

Kontron

Kontron COMe-bP5020 Bedienungsanleitung

Kontron

Kontron SMARC-sAMX8X Bedienungsanleitung

Kontron

Kontron COMh-caRP Bedienungsanleitung

Kontron

Kontron SMARC-sAMX6i Bedienungsanleitung

Kontron

Kontron COMe-mTT10 Bedienungsanleitung

Kontron

Kontron KBox C-102 Series Bedienungsanleitung

Kontron

Kontron coolMonster/PM Bedienungsanleitung

Kontron

Kontron KTQ77/Flex Bedienungsanleitung

Kontron

Kontron PC/104-PCMCIA-1 Bedienungsanleitung

Kontron

Kontron ThinkIO-P Bedienungsanleitung

Kontron

Kontron xBP-6E2P3 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung

Kontron ePCI-201 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken