Kontron CP3003-SA Bedienungsanleitung

If it’s embedded, it’s Kontron.

» User Guide «

D R A F T — F O R I N T E R N A L U S E O N L Y

CP3003-SA

3U CompactPCI Processor Board based on

the 3rd Generation Intel® Core™ i7 Processor with

the Intel® QM77 Chipset

Doc. ID: 1052-6929, Rev. 1.0

November 14, 2012

Preface CP3003-SA

Page ii ID 1052-6929, Rev. 1.0

D R A F T — F O R I N T E R N A L U S E O N L Y

Revision History

Imprint

Kontron Europe GmbH may be contacted via the following:

MAILING ADDRESS TELEPHONE AND E-MAIL

Kontron Europe GmbH +49 (0) 800-SALESKONTRON

Sudetenstraße 7 [email protected]

D - 87600 Kaufbeuren Germany

For further information about other Kontron products, please visit our Internet web site:

www.kontron.com.

Disclaimer

not guaranteed for legal purposes. Information has been carefully checked and is believed to

be accurate; however, no responsibility is assumed for inaccuracies. Kontron and the Kontron

logo and all other trademarks or registered trademarks are the property of their respective own-

ers and are recognized. Specifications are subject to change without notice.

Publication Title: CP3003-SA: 3U CompactPCI Processor Board based on the 3rd Gener-

ation Intel® Core™ i7 Processor with the Intel® QM77 Chipset

Doc. ID: 1052-6929

Rev. Brief Description of Changes Date of Issue

1.0 Initial issue 14-Nov-2012

CP3003-SA Preface

ID 1052-6929, Rev. 1.0 Page iii

D R A F T — F O R I N T E R N A L U S E O N L Y

Table of Contents

Revision History .........................................................................................................ii

Imprint ........................................................................................................................ii

Disclaimer ..................................................................................................................ii

Table of Contents ......................................................................................................iii

List of Tables .............................................................................................................ix

List of Figures .........................................................................................................xiii

Proprietary Note .......................................................................................................xv

Trademarks ..............................................................................................................xv

Environmental Protection Statement ........................................................................xv

Explanation of Symbols ..........................................................................................xvi

For Your Safety ......................................................................................................xvii

High Voltage Safety Instructions ........................................................................xvii

Special Handling and Unpacking Instructions ...................................................xvii

General Instructions on Usage ............................................................................. xviii

Two Year Warranty ..................................................................................................xix

1. Introduction ............................................................................. 1 - 3

1.1 Board Overview .......................................................................................1 - 3

1.2 Board-Specific Information ......................................................................1 - 3

1.3 System Expansion Capabilities ...............................................................1 - 5

1.3.1 CP3003-HDD Module (8 HP and 12 HP) ........................................1 - 5

1.3.2 CP3003-XMC Module (8 HP) .........................................................1 - 5

1.3.3 CP-RIO3-04 Rear I/O Module .........................................................1 - 5

1.3.4 SATA Flash Module ........................................................................1 - 5

1.3.5 Smart Extension Module .................................................................1 - 5

1.4 Board Diagrams ......................................................................................1 - 5

1.4.1 Functional Block Diagram ...............................................................1 - 6

1.4.2 Front Panel .....................................................................................1 - 7

1.4.3 Board Layout ..................................................................................1 - 8

1.5 Technical Specification ............................................................................1 - 9

1.6 Standards ..............................................................................................1 - 14

1.7 Related Publications .............................................................................1 - 15

Preface CP3003-SA

Page iv ID 1052-6929, Rev. 1.0

D R A F T — F O R I N T E R N A L U S E O N L Y

2. Functional Description ............................................................2 - 3

2.1 Processor .................................................................................................2 - 3

2.2 Memory ....................................................................................................2 - 4

2.3 Intel® QM77 Express Chipset .................................................................2 - 5

2.4 Timer ........................................................................................................2 - 5

2.5 Watchdog Timer ......................................................................................2 - 5

2.6 Battery .....................................................................................................2 - 6

2.7 Reset .......................................................................................................2 - 6

2.8 Flash Memory ..........................................................................................2 - 6

2.8.1 SPI Boot Flash for uEFI BIOS .........................................................2 - 6

2.8.2 SATA Flash Module (Optional) ........................................................2 - 7

2.9 8 HP Extension Module ...........................................................................2 - 7

2.10 Trusted Platform Module 1.2 (On Request) .............................................2 - 7

2.11 Board Interfaces ......................................................................................2 - 8

2.11.1 Front Panel LEDs ............................................................................2 - 8

2.11.1.1 Watchdog and Temperature Status LEDs ...............................2 - 8

2.11.1.2 General Purpose LEDs ...........................................................2 - 9

2.11.2 DIP Switch SW1 ............................................................................2 - 10

2.11.3 USB Interfaces ..............................................................................2 - 10

2.11.3.1 Front Panel USB Connectors J5 and J6 ...............................2 - 11

2.11.4 Integrated Processor Graphics Controller .....................................2 - 11

2.11.4.1 Graphics Memory Usage ......................................................2 - 12

2.11.4.2 VGA Analog Interface and Connector J4 ..............................2 - 12

2.11.5 Serial Ports ....................................................................................2 - 12

2.11.6 Gigabit Ethernet ............................................................................2 - 13

2.11.7 SATA Interfaces .............................................................................2 - 14

2.11.7.1 SATA Connector J3 ..............................................................2 - 14

2.11.8 Debug Interface .............................................................................2 - 15

2.11.9 CompactPCI Interface ...................................................................2 - 15

2.11.9.1 Board Functionality when Installed in System Controller Slot 2 - 15

2.11.9.2 Board Functionality when Installed in Peripheral Slot ...........2 - 15

2.11.9.3 Front/Rear I/O Configuration ................................................2 - 15

2.11.9.4 Board Insertion/Replacement under Power .........................2 - 16

2.11.9.5 Power Ramping ....................................................................2 - 16

CP3003-SA Preface

ID 1052-6929, Rev. 1.0 Page v

D R A F T — F O R I N T E R N A L U S E O N L Y

2.11.9.6 ENUM# Interrupt ..................................................................2 - 16

2.11.10 CompactPCI Connectors J1 and J2 .............................................2 - 17

2.11.10.1 CompactPCI Connector Keying ...........................................2 - 17

2.11.10.2 CompactPCI Connectors J1 and J2 Pinouts ........................2 - 18

2.11.10.3 Optional Rear I/O Interface ..................................................2 - 21

2.11.10.4 Rear I/O Pin Description ......................................................2 - 24

3. Installation ............................................................................... 3 - 3

3.1 Safety Requirements ...............................................................................3 - 3

3.2 Initial Installation Procedures ..................................................................3 - 4

3.3 Standard Removal Procedures ...............................................................3 - 5

3.4 Insertion/Removal under Power .............................................................3 - 6

3.4.1 Replacement under Power in Peripheral Slot .................................3 - 6

3.5 Installation of CP3003-SA Peripheral Devices ........................................3 - 8

3.5.1 USB Device Installation ................................................................ 3 - 11

3.5.2 Installation of External SATA Devices ........................................... 3 - 11

3.5.3 SATA Flash Module Installation .................................................... 3 - 11

3.5.4 Smart Extension Module Installation ............................................3 - 12

3.5.5 2.5” HDD/SSD Installation ............................................................3 - 12

3.5.6 XMC Module Installation ...............................................................3 - 12

3.5.7 CFast Card Installation .................................................................3 - 16

3.5.8 Rear I/O Device Installation ..........................................................3 - 16

3.5.9 Battery Replacement ....................................................................3 - 16

3.6 Software Installation ..............................................................................3 - 17

4. Configuration ........................................................................... 4 - 3

4.1 DIP Switch Configuration ........................................................................4 - 3

4.1.1 I/O Address Map .............................................................................4 - 4

4.2 CP3003-SA-Specific Registers ...............................................................4 - 5

4.2.1 Status Register 0 (STAT0) ..............................................................4 - 5

4.2.2 Status Register 1 (STAT1) ..............................................................4 - 6

4.2.3 Control Register 0 (CTRL0) ............................................................4 - 6

4.2.4 Control Register 1 (CTRL1) ............................................................4 - 7

Preface CP3003-SA

Page vi ID 1052-6929, Rev. 1.0

D R A F T — F O R I N T E R N A L U S E O N L Y

4.2.5 Device Protection Register (DPROT) ..............................................4 - 8

4.2.6 Reset Status Register (RSTAT) .......................................................4 - 9

4.2.7 Board Interrupt Configuration Register (BICFG) ...........................4 - 10

4.2.8 Status Register 2 (STAT2) .............................................................4 - 11

4.2.9 Board ID High Byte Register (BIDH) .............................................4 - 11

4.2.10 Board and PLD Revision Register (BREV) ...................................4 - 12

4.2.11 Geographic Addressing Register (GEOAD) ..................................4 - 12

4.2.12 Board ID Low Byte Register (BIDL) ..............................................4 - 12

4.2.13 Watchdog Timer Control Register (WTIM) ....................................4 - 13

4.2.14 LED Configuration Register (LCFG) .............................................4 - 15

4.2.15 LED Control Register (LCTRL) .....................................................4 - 16

4.2.16 General Purpose Output Register (GPOUT) .................................4 - 17

4.2.17 General Purpose Input Register (GPIN) .......................................4 - 18

5. Power Considerations .............................................................5 - 3

5.1 System Power ..........................................................................................5 - 3

5.1.1 CP3003-SA Baseboard ...................................................................5 - 3

5.1.2 Backplane .......................................................................................5 - 4

5.1.3 Power Supply Units .........................................................................5 - 4

5.1.3.1 Start-Up Requirement .............................................................5 - 4

5.1.3.2 Power-Up Sequence ...............................................................5 - 4

5.1.3.3 Tolerance ................................................................................5 - 5

5.1.3.4 Regulation ...............................................................................5 - 5

5.2 Power Consumption ................................................................................5 - 6

5.3 Power Consumption of CP3003-SA Accessories ....................................5 - 8

5.4 Maximum Power Consumption of XMC Modules ....................................5 - 8

6. Thermal Considerations .........................................................6 - 3

6.1 Board Internal Thermal Monitoring ..........................................................6 - 3

6.2 Processor Thermal Monitoring .................................................................6 - 3

6.2.1 Digital Thermal Sensor (DTS) .........................................................6 - 3

6.2.2 Adaptive Thermal Monitor ...............................................................6 - 3

6.2.2.1 Frequency/sVID Control .........................................................6 - 4

CP3003-SA Preface

ID 1052-6929, Rev. 1.0 Page vii

D R A F T — F O R I N T E R N A L U S E O N L Y

6.2.2.2 Clock Modulation ....................................................................6 - 4

6.2.3 Catastrophic Cooling Failure Sensor .............................................6 - 4

6.3 Chipset Thermal Monitor Feature ............................................................6 - 5

6.4 External Thermal Regulation ...................................................................6 - 5

6.4.1 Operational Limits for the CP3003-SA .................................................6 - 6

6.4.2 Peripherals ......................................................................................6 - 8

A. CP3003-HDD Module ...............................................................A - 3

A.1 Overview .................................................................................................A - 3

A.2 Technical Specifications ..........................................................................A - 3

A.3 CP3003-HDD Module Functional Block Diagram ...................................A - 5

A.4 Front Panel of the CP3003-SA with CP3003-HDD Module ....................A - 6

A.5 CP3003-HDD Module Layout ..................................................................A - 7

A.6 Module Interfaces (Front Panel and Onboard) ........................................A - 9

A.6.1 DisplayPort Interfaces .....................................................................A - 9

A.6.2 Gigabit Ethernet Interface .............................................................A - 10

A.6.3 USB Interface ...............................................................................A - 11

A.6.4 Serial Port .....................................................................................A - 11

A.6.5 CFast Card Connector ..................................................................A - 12

A.6.6 SATA Interface ..............................................................................A - 13

A.6.7 Battery ..........................................................................................A - 14

B. CP3003-XMC Module ...............................................................B - 3

B.1 Overview .................................................................................................B - 3

B.2 Technical Specifications ..........................................................................B - 3

B.3 CP3003-XMC Module Functional Block Diagram ...................................B - 4

B.4 Front Panel of the 8 HP CP3003-SA with CP3003-XMC Module ...........B - 5

B.5 CP3003-XMC Module Layout .................................................................B - 6

B.6 Module Interfaces (Onboard) ..................................................................B - 7

B.6.1 CFast Card Connector ....................................................................B - 7

B.6.2 XMC Connector ..............................................................................B - 8

Preface CP3003-SA

Page viii ID 1052-6929, Rev. 1.0

D R A F T — F O R I N T E R N A L U S E O N L Y

C. CP-RIO3-04 Rear I/O Module ................................................. C - 3

C.1 Overview .................................................................................................C - 3

C.2 Technical Specifications .........................................................................C - 3

C.3 Front Panels ...........................................................................................C - 4

C.4 Module Layout: 4 HP and 8 HP Versions ...............................................C - 5

C.5 Module Interfaces ...................................................................................C - 6

C.5.1 USB Interfaces ...............................................................................C - 6

C.5.2 VGA Interface .................................................................................C - 6

C.5.3 Gigabit Ethernet Interface ..............................................................C - 7

C.5.4 COM Interface ................................................................................C - 8

C.5.5 Peripheral Control Interface ...........................................................C - 9

C.5.6 SATA Interfaces ............................................................................C - 10

C.5.7 Rear I/O Interface on CompactPCI Connector rJ2 .......................C - 11

D. SATA Flash Module ................................................................ D - 3

D.1 Technical Specifications .........................................................................D - 3

D.2 SATA Flash Module Layout ....................................................................D - 4

E. Smart Extension Module .........................................................E - 3

E.1 Technical Specifications .........................................................................E - 3

E.2 Smart Extension Module Layout .............................................................E - 4

E.3 Module Interfaces ...................................................................................E - 5

E.3.1 USB Interface .................................................................................E - 5

E.3.2 SATA Interface ...............................................................................E - 6

CP3003-SA Preface

ID 1052-6929, Rev. 1.0 Page ix

D R A F T — F O R I N T E R N A L U S E O N L Y

List of Tables

1-1 CP3003-SA Main Specifications ................................................................ 1 - 9

1-2 Standards ................................................................................................ 1 - 14

1-3 Additional Standards for Boards Ordered with Ruggedized Service ....... 1 - 15

1-4 Related Publications ................................................................................ 1 - 15

2-1 Features of the Processors Supported on the CP3003-SA ....................... 2 - 4

2-2 Watchdog and Temperature Status LEDs Function ................................... 2 - 8

2-3 General Purpose LEDs Function ............................................................... 2 - 9

2-4 POST Code Sequence ............................................................................ 2 - 10

2-5 POST Code Example .............................................................................. 2 - 10

2-6 DIP Switch SW1 Function ....................................................................... 2 - 10

2-7 USB Connectors J5 and J6 Pinout .......................................................... 2 - 11

2-8 Maximum Resolution in 3-Display Configurations ................................... 2 - 11

2-9 D-Sub VGA Connector J4 Pinout ............................................................ 2 - 12

2-10 Pinout of Dual GbE Connector J7A/B ...................................................... 2 - 13

2-11 SATA Connector J3 Pinout ...................................................................... 2 - 14

2-12 CompactPCI Connector J1 System Controller Slot Pinout ...................... 2 - 18

2-13 CompactPCI Connector J1 Peripheral Slot Pinout .................................. 2 - 19

2-14 64-bit CompactPCI Connector J2 Pinout (CP3003-SA Front I/O Vers.) .. 2 - 20

2-15 Rear I/O CompactPCI Connector J2 Pinout (CP3003-SA Rear I/O Vers.).. 2 - 22

2-17 GPIO Signal Description .......................................................................... 2 - 23

2-16 Rear I/O Signal Description ..................................................................... 2 - 23

2-18 COMA and COMB Signal Description ..................................................... 2 - 24

2-19 GPIO Signal Description .......................................................................... 2 - 25

2-20 VGA Signal Description ........................................................................... 2 - 25

2-21 Gigabit Ethernet Signal Description ......................................................... 2 - 26

2-22 SATA Signal Description .......................................................................... 2 - 27

2-23 USB Signal Description ........................................................................... 2 - 27

2-24 Power Supply and Power Management Signal Description .................... 2 - 28

4-1 DIP Switch SW1 Functionality ................................................................... 4 - 3

4-2 I/O Address Map ........................................................................................ 4 - 4

4-3 Status Register 0 (STAT0) ......................................................................... 4 - 5

4-4 Status Register 1 (STAT1) ......................................................................... 4 - 6

Preface CP3003-SA

Page x ID 1052-6929, Rev. 1.0

D R A F T — F O R I N T E R N A L U S E O N L Y

4-5 Control Register 0 (CTRL0) ....................................................................... 4 - 6

4-6 Control Register 1 (CTRL1) ....................................................................... 4 - 7

4-7 Device Protection Register (DPROT) ......................................................... 4 - 8

4-8 Reset Status Register (RSTAT) .................................................................. 4 - 9

4-9 Board Interrupt Configuration Register (BICFG) ...................................... 4 - 10

4-10 Status Register 2 (STAT2) ........................................................................ 4 - 11

4-11 Board ID High Byte Register (BIDH) ........................................................ 4 - 11

4-12 Board and PLD Revision Register (BREV) .............................................. 4 - 12

4-13 Geographic Addressing Register (GEOAD) ............................................. 4 - 12

4-14 Board ID Low Byte Register (BIDL) ......................................................... 4 - 12

4-15 Watchdog Timer Control Register (WTIM) ............................................... 4 - 14

4-16 LED Configuration Register (LCFG) ........................................................ 4 - 15

4-17 LED Control Register (LCTRL) ................................................................ 4 - 16

4-18 General Purpose Output Register (GPOUT) ............................................ 4 - 17

4-19 General Purpose Input Register (GPIN) .................................................. 4 - 18

5-1 Maximum Input Power Voltage Limits ........................................................ 5 - 3

5-2 DC Operational Input Voltage Ranges ....................................................... 5 - 3

5-3 Input Voltage Characteristics ..................................................................... 5 - 5

5-4 CP3003-SA in EFI Shell ............................................................................. 5 - 7

5-5 CP3003-SA with Win. 7 and Processor and Graphics in Idle State ........... 5 - 7

5-6 CP3003-SA with Win. 7 and Max. Proc. Workload and Basic Graph. Oper. 5 - 7

5-7 CP3003-SA with Win. 7 and Max. Processor and Graphics Workload ...... 5 - 7

5-8 Power Consumption of CP3003-SA Accessories ...................................... 5 - 8

5-9 XMC Module Current ................................................................................. 5 - 8

A-1 CP3003-HDD Module Specifications ........................................................ A - 3

A-2 DisplayPort Connectors J1 and J2 Pinout ................................................. A - 9

A-3 Gigabit Ethernet Connector J5 Pinout ..................................................... A - 10

A-4 USB Connector J7 Pinout ........................................................................ A - 11

A-5 Serial Port Connector J8 Pinout ............................................................... A - 11

A-6 CFast Connector J3 Pinout ..................................................................... A - 12

A-7 SATA Connector J6/J2 Pinout ................................................................. A - 13

B-1 CP3003-XMC Module Specifications ........................................................ B - 3

B-2 CFast Connector J2 Pinout ....................................................................... B - 7

B-3 XMC Connector J1 Pinout ......................................................................... B - 8

Andere Handbücher für CP3003-SA

Inhaltsverzeichnis

Andere Kontron Computerhardware Handbücher

Kontron

Kontron EBP-11A4B6 Bedienungsanleitung

Kontron

Kontron PEP CP321 Bedienungsanleitung

Kontron

Kontron Kiss 2U Bedienungsanleitung

Kontron

Kontron CP3002 Bedienungsanleitung

Kontron

Kontron coolMonster/PM Bedienungsanleitung

Kontron

Kontron CP3002-RC Bedienungsanleitung

Kontron

Kontron cPCI-MXS64 Produkthandbuch

Kontron

Kontron nanoETXexpress-HMI Baseboard Bedienungsanleitung

Kontron

Kontron VX3030 Bedienungsanleitung

Kontron

Kontron microETXexpress-SP Bedienungsanleitung

Kontron

Kontron SMARC-sAMX8X Bedienungsanleitung

Kontron

Kontron CPS3003-SA Bedienungsanleitung

Kontron

Kontron CP6500-V Bedienungsanleitung

Kontron

Kontron aFLAT Series Bedienungsanleitung

Kontron

Kontron KTQ67/Flex Bedienungsanleitung

Kontron

Kontron AdvancedTCA AT8001 Bedienungsanleitung

Kontron

Kontron 3.5-SBC-APL V2.0 Bedienungsanleitung

Kontron

Kontron Kiss-Stor 0/5 Bedienungsanleitung

Kontron

Kontron cPCI-DMXS64GX Produkthandbuch

Kontron

Kontron ePCI-201 Bedienungsanleitung

Kontron

Kontron CP6930 Bedienungsanleitung

Kontron

Kontron MPC-pONE Bedienungsanleitung

Kontron

Kontron COMh-sdID Bedienungsanleitung

Kontron

Kontron SMARC-sAMX8 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung

Measurement Computing

Measurement Computing CIO-EXP-RTD16 Bedienungsanleitung

Matrox

Matrox DigiSuite DigiMix Installations- und Betriebsanleitung