Kontron KISS Stor Slim Bedienungsanleitung

KISS Stor Slim

KISS Stor Slim Quick Installation Guide

Package Contents

zKISS Stor Slim RAID box.

zTwo disk drive carriers.

zKISS Stor Slim Quick Installation Guide.

zKISS Stor Slim user kit CD. (User’s Manual and GUI software)

zRS-232 cable with bracket and serial cable for COM port.

zDisk drive mounting screws.

zTwo keys for drive carriers. (identical)

Know your KISS Stor Slim

zKISS Stor Slim Front view:

Access LED indicator for indicating that hard disk is been accessing.

Status LED indicator for indicating that disk current status.

KISS Stor Slim

zKISS Stor Slim Rear view:

1. SATA DC power input connector

2. SATA host connector

3. RS232 connector (J10)

4. Reserved for feature/function expand (J9 default is closed)

5. Standard AT/ATX DC power input connector

zStatus of all LED indicators KISS Stor Slim

The table lists all matches of 2 LED indicators for indicating status of RAID

box.

Status indicator

Red/Green

Access indicator

Yellow

RAID status

Green Off Disk is installed, no access

Green On/flash Disk is being accessing

Red Off No disk installed or disk failure

Flash (Red/Green) On/flash Disk is rebuilding

KISS Stor Slim

Setup your KISS Stor Slim

1. Load hard drives to each drive carriers, and secure the hard drives by

screwing.

2. Power down your host computer and mount the RAID box in the host.

3. Connect the SATA or IDE cable and DC power cable to RAID box from host

computer.

4. Connect the RS-232 cable to RAID box RS-232 port and COM port of the host.

(Option for upgrading firmware or GUI remote monitor)

Caution

urn off and disconnect all electrical power from the system

before be

innin

installation.

Note

There is a triangular symbol “▲” on both PCB

connector(J10) and RS-232 cable connector, please

make sure that you connect in the right direction (both

triangle symbols match each other).

KISS Stor Slim

Start to use your KISS Stor SATA

Application 1: Two new disk drives.

1. Install and lock all drive carriers and they are ready for use.

2. Power on the host computer.

3. After system boot up, the RAID box will be recognized as Accusys KISS

Stor Slim by host system. And system treats it as a single disk.

4 Partition and format the RAID box before it can be used.

Application 2: Installing one disk drive with data and one new disk

drive.

1. The new disk drives must have the same capacity or larger capacity than

the drive with data.

2. Lock the disk with data at the top drive carrier and leave the new disks

unlocked at the bottom drive carriers. This identifies the disk with data as

the source drive. (The host computer must in power off state.)

3. Power on the host computer.

4. Lock the bottom drive.

5. The RAID box will immediately begin mirroring the data from the source

drive to the new disk drive in bottom drive carrier. Any old data on the

new disk drive will be lost, and is overwritten with the mirror image of the

source drive.

Contact Kontron Embedded Computers GmbH

•Support: [email protected]

Note

If you have installed non-identical hard disk drives,

your computer will recognize RAID box

as a single hard

disk with a capacity equal to the smaller hard disk drive

installed in the RAID box.

Inhaltsverzeichnis

Andere Kontron Computerhardware Handbücher

Kontron

Kontron ePCI-201 Bedienungsanleitung

Kontron

Kontron COMh-caRP Bedienungsanleitung

Kontron

Kontron cPCI-DMXS64GX Produkthandbuch

Kontron

Kontron pITX-iMX8M Bedienungsanleitung

Kontron

Kontron SMARC-sAMX8 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Kontron

Kontron KTQ67/Flex Bedienungsanleitung

Kontron

Kontron KBox C-102 Series Bedienungsanleitung

Kontron

Kontron CI5TTV Series Bedienungsanleitung

Kontron

Kontron CP3002 Bedienungsanleitung

Kontron

Kontron ETX -CN8 Bedienungsanleitung

Kontron

Kontron KTQ77/Flex Bedienungsanleitung

Kontron

Kontron CP3003-SA Bedienungsanleitung

Kontron

Kontron cPCI-MXS64GX Produkthandbuch

Kontron

Kontron CP6003-RA/RC Bedienungsanleitung

Kontron

Kontron MSM-LP Bedienungsanleitung

Kontron

Kontron CP308 Bedienungsanleitung

Kontron

Kontron ThinkIO-P Bedienungsanleitung

Kontron

Kontron 820951 ADD2-DVI-Dual-Internal Bedienungsanleitung

Kontron

Kontron CPS3003-SA Bedienungsanleitung

Kontron

Kontron CP-ADAP-P47-PB (3U) Bedienungsanleitung

Kontron

Kontron COM-HPC Bedienungsanleitung

Kontron

Kontron COMe-bP5020 Bedienungsanleitung

Kontron

Kontron AT8060 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung