Kontron CP3003-SA Bedienungsanleitung

If it’s embedded, it’s Kontron.

» User Guide «

D R A F T — F O R I N T E R N A L U S E O N L Y

CP3003-SA/CP3003-V

uEFI BIOS

Doc. ID: 1053-4014, Rev. 2.0

July 29, 2013

Preface CP3003-SA/CP3003-V uEFI BIOS

Page ii ID 1053-4014, Rev. 2.0

D R A F T — F O R I N T E R N A L U S E O N L Y

Revision History

Imprint

Kontron Europe GmbH may be contacted via the following:

MAILING ADDRESS TELEPHONE AND E-MAIL

Kontron Europe GmbH +49 (0) 800-SALESKONTRON

Sudetenstraße 7 [email protected]

D - 87600 Kaufbeuren Germany

For further information about other Kontron products, please visit our Internet web site:

www.kontron.com.

Disclaimer

not guaranteed for legal purposes. Information has been carefully checked and is believed to

be accurate; however, no responsibility is assumed for inaccuracies. Kontron and the Kontron

logo and all other trademarks or registered trademarks are the property of their respective own-

ers and are recognized. Specifications are subject to change without notice.

Publication Title: CP3003-SA/CP3003-V uEFI BIOS User Guide

Doc. ID: 1053-4014

Rev. Brief Description of Changes Date of Issue

1.0 Initial issue based on the uEFI BIOS version R11 29-Jul-2013

2.0 Added description for the CP3003-V based on the uEFI BIOS ver-

sion R11 29-Jul-2013

CP3003-SA/CP3003-V uEFI BIOS Preface

ID 1053-4014, Rev. 2.0 Page iii

Table of Contents

Revision History .........................................................................................................ii

Imprint ........................................................................................................................ii

Disclaimer ..................................................................................................................ii

Table of Contents ......................................................................................................iii

1. Starting uEFI BIOS Setup .............................................................3

1.1 Main Setup Menu ......................................................................................... 4

1.2 Navigation .................................................................................................... 5

2. Main Setup .....................................................................................9

2.1 BIOS Information .......................................................................................... 9

2.2 Memory Information ..................................................................................... 9

2.3 Trusted Computing ..................................................................................... 10

2.3.1 Configuration ..................................................................................... 10

2.3.1.1 TPM Support (CP3003-SA) ....................................................... 10

2.3.2 Current Status Information ................................................................. 10

2.4 CPU Configuration ......................................................................................11

2.4.1 CPU Configuration ..............................................................................11

2.4.2 Max Freq Ratio ...................................................................................11

2.5 Firmware Update Configuration ................................................................. 12

2.5.1 Me FW Image Re-Flash ..................................................................... 12

2.6 USB Configuration ..................................................................................... 13

2.6.1 USB Configuration ............................................................................. 13

2.6.1.1 USB Devices ............................................................................. 13

2.6.1.2 Legacy USB Support ................................................................. 13

2.6.1.3 USB3.0 Support ........................................................................ 14

2.6.1.4 XHCI Hand-Off .......................................................................... 14

2.6.1.5 EHCI Hand-Off .......................................................................... 14

2.6.2 USB Hardware Delays and Time-outs ............................................... 15

2.6.2.1 USB Transfer Timeout ............................................................... 15

2.6.2.2 Device Reset Timeout ............................................................... 15

2.6.2.3 Device Power-up Delay ............................................................. 15

Preface CP3003-SA/CP3003-V uEFI BIOS

Page iv ID 1053-4014, Rev. 2.0

2.7 Serial Port Console Redirection ..................................................................16

2.7.1 COM0 .................................................................................................16

2.7.1.1 Console Redirection ..................................................................16

2.7.1.2 Console Redirection Settings ....................................................16

2.7.2 COM1 .................................................................................................17

2.7.2.1 Console Redirection ..................................................................17

2.7.2.2 Console Redirection Settings ....................................................17

2.7.3 Serial Port for Out-of-Band Management/Windows EMS ..................20

2.7.3.1 Console Redirection ..................................................................20

2.7.3.2 Console Redirection Settings ....................................................20

2.8 System Language .......................................................................................22

2.9 System Date ...............................................................................................22

2.10 System Time ...............................................................................................22

2.11 Access Level ...............................................................................................22

3. Boot Setup .................................................................................. 25

3.1 Boot Configuration ......................................................................................25

3.1.1 Setup Prompt Timeout .......................................................................25

3.1.2 Bootup NumLock State ......................................................................25

3.1.3 Quiet Boot ..........................................................................................26

3.1.4 Fast Boot ............................................................................................26

3.1.5 CSM16 Module Version .....................................................................26

3.1.6 GateA20 Active ..................................................................................26

3.1.7 Option ROM Messages ......................................................................26

3.1.8 Interrupt 19 Capture ...........................................................................27

3.1.9 CSM Support ......................................................................................27

3.2 Boot Option Priorities ..................................................................................27

3.2.1 Boot Option #1..2 ...............................................................................27

3.2.2 Hard Drive BBS Priorities ...................................................................27

4. Security Setup ............................................................................ 31

4.1 Administrator Password ..............................................................................32

4.2 User Password ...........................................................................................32

CP3003-SA/CP3003-V uEFI BIOS Preface

ID 1053-4014, Rev. 2.0 Page v

4.3 HDD Security Configuration ....................................................................... 32

4.4 Remember the Password ........................................................................... 32

5. Save & Exit ...................................................................................35

5.1 Save Changes and Exit .............................................................................. 35

5.2 Discard Changes and Exit .......................................................................... 35

5.3 Save Changes and Reset .......................................................................... 35

5.4 Discard Changes and Reset ...................................................................... 36

5.5 Save Changes (Save Options) ................................................................... 36

5.6 Discard Changes (Save Options) ............................................................... 36

5.7 Restore Defaults (Save Options) ................................................................ 36

5.8 Save as User Defaults (Save Options) ....................................................... 36

5.9 Restore User Defaults (Save Options) ....................................................... 36

5.10 Boot Override ............................................................................................. 36

6. The uEFI Shell ..............................................................................39

6.1 Introduction, Basic Operation ..................................................................... 39

6.1.1 Shell Startup ...................................................................................... 39

6.2 Kontron-Specific uEFI Shell Commands .................................................... 40

6.2.1 kBiosRevision uEFI Shell Command ................................................. 41

6.2.2 kboardconfig uEFI Shell Command ................................................... 42

6.2.3 kboardinfo uEFI Shell Command ....................................................... 49

6.2.4 kboot uEFI Shell Command ............................................................... 51

6.2.5 kbootnsh uEFI Shell Command ......................................................... 52

6.2.6 kclearnvram uEFI Shell Command .................................................... 53

6.2.7 kflash uEFI Shell Command .............................................................. 54

6.2.8 kmkramdisk uEFI Shell Command .................................................... 55

6.2.9 kpassword uEFI Shell Command ...................................................... 56

6.2.10 kresetconfig uEFI Shell Command ................................................... 57

6.2.11 kSettings uEFI Shell Command ......................................................... 58

6.2.12 kwdt uEFI Shell Command ................................................................ 59

6.3 uEFI Shell Scripting .................................................................................... 60

6.3.1 Startup Scripting ................................................................................ 60

Preface CP3003-SA/CP3003-V uEFI BIOS

Page vi ID 1053-4014, Rev. 2.0

6.3.2 Create a Startup Script .......................................................................60

6.3.3 Examples of Startup Scripts ...............................................................60

6.3.3.1 Automatic Booting from USB Flash Drive ..................................60

6.3.3.2 Execute Shell Script on Other Harddrive ...................................61

6.3.3.3 Enable Watchdog and Control PXE Boot ..................................61

6.3.3.4 Handling the Startup Script in the Flash Bank ...........................62

7. Updating the uEFI BIOS ............................................................. 65

7.1 uEFI BIOS Fail-Over Mechanism ...............................................................65

7.2 Updating Procedure ....................................................................................65

7.3 uEFI BIOS Recovery ..................................................................................65

7.4 Determining the Active Flash ......................................................................65

CP3003-SA/CP3003-V uEFI BIOS Starting uEFI BIOS Setup

ID 1053-4014, Rev. 2.0 Page 1

Starting uEFI BIOS Setup

Chapter 1

D R A F T — F O R I N T E R N A L U S E O N L Y

Starting uEFI BIOS Setup CP3003-SA/CP3003-V uEFI BIOS

Page 2 ID 1053-4014, Rev. 2.0

D R A F T — F O R I N T E R N A L U S E O N L Y

This page has been intentionally left blank.

CP3003-SA/CP3003-V uEFI BIOS Starting uEFI BIOS Setup

ID 1053-4014, Rev. 2.0 Page 3

D R A F T — F O R I N T E R N A L U S E O N L Y

1. Starting uEFI BIOS Setup

The CP3003-SA/CP3003-V is provided with a Kontron-customized, pre-installed and config-

ured version of Aptio® (referred to as uEFI BIOS in this manual), AMI’s next generation BIOS

firmware based on the Unified Extensible Firmware Interface (uEFI) specification and the In-

tel® Platform Innovation Framework for EFI. This uEFI BIOS provides a variety of new and en-

hanced functions specifically tailored to the hardware features of the CP3003-SA/CP3003-V.

To take advantage of these functions, the uEFI BIOS comes with a Setup program which pro-

vides quick and easy access to the individual function settings for control or modification of the

uEFI BIOS configuration.

The Setup program allows the accessing of various menus which provide functions or access

to sub-menus with more specific functions of their own. The individual menus and the configu-

rable functions are described in this guide.

To start the uEFI BIOS Setup program, follow the steps below:

1. Power on the board.

2. Wait until the first characters appear on the screen (POST messages or splash screen).

3. Press the <DEL> or <F2> key.

4. If the uEFI BIOS is password-protected, a window such as the one below will appear:

Enter either the User password or the Administrator password (refer to Chapter 4, Secu-

rity Setup, for further information), press <RETURN>, and proceed with step 5.

5. A Setup menu with the following token attributes will appear.

The currently active menu and the currently active uEFI BIOS Setup item are highlighted

in white.

Enter Password

Starting uEFI BIOS Setup CP3003-SA/CP3003-V uEFI BIOS

Page 4 ID 1053-4014, Rev. 2.0

D R A F T — F O R I N T E R N A L U S E O N L Y

1.1 Main Setup Menu

The Main setup menu is the first screen that appears after starting the Setup program.

At the top of this screen and all of the other major screens, there is a setup menu selection bar,

which permits access to all of the other major setup menus. These menus are selected via the

left-right arrow keys.

All setup menu screens have two main frames. The left frame displays all the functions that can

be configured. They are displayed in blue. Functions displayed in gray provide information

about the status or the operational configuration.

The right frame displays the key legend. Above the key legend there is an area reserved for a

text message. When a function is selected in the left frame, it is displayed in white. Often a text

message will accompany it.

Main Boot Security Save & Exit

Title (black)

Read only field (grey) value

Setup item (blue) [value]

Pointer to a subordinate menu

: Select Screen

: Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3 Optimized Defaults

F4: Save & Exit

ESC: Exit

Andere Handbücher für CP3003-SA

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kontron Computerhardware Handbücher

Kontron

Kontron microETXexpress-DC Bedienungsanleitung

Kontron

Kontron 104 Bedienungsanleitung

Kontron

Kontron pITX-iMX8M Bedienungsanleitung

Kontron

Kontron PC/104-PCMCIA-1 Bedienungsanleitung

Kontron

Kontron KBox F-420-WLU Bedienungsanleitung

Kontron

Kontron PCI-759 Bedienungsanleitung

Kontron

Kontron MSM200X Bedienungsanleitung

Kontron

Kontron SMARC-sAMX6i Bedienungsanleitung

Kontron

Kontron COMe-mTT10 Bedienungsanleitung

Kontron

Kontron COMe-mSP1 Bedienungsanleitung

Kontron

Kontron CP3005-SA Bedienungsanleitung

Kontron

Kontron CP308 Bedienungsanleitung

Kontron

Kontron Mungo540 Bedienungsanleitung

Kontron

Kontron KTQ77/Flex Bedienungsanleitung

Kontron

Kontron coolMonster/PM Bedienungsanleitung

Kontron

Kontron xBP-6E2P3 Bedienungsanleitung

Kontron

Kontron CP-RIO6-923 Bedienungsanleitung

Kontron

Kontron MSP8040 Series Bedienungsanleitung

Kontron

Kontron COM-HPC Bedienungsanleitung

Kontron

Kontron nanoETXexpress-SP Bedienungsanleitung

Kontron

Kontron KBox E-200 Series Bedienungsanleitung

Kontron

Kontron COMe-bP5020 Bedienungsanleitung

Kontron

Kontron CPCI-MXS Produkthandbuch

Kontron

Kontron AdvancedTCA AT8001 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung

Measurement Computing

Measurement Computing CIO-EXP-RTD16 Bedienungsanleitung

Matrox

Matrox DigiSuite DigiMix Installations- und Betriebsanleitung