Kontron KTGM45/mITX Bedienungsanleitung

KTGM45 Users Guide (PRELIMINARY)

KTD-N0793-0

KTGM45/mITX

KTGM45/Flex

KTD-N0793-0 Page 2

KTGM45 Users Guide

Document revision history.

Revision Date By Comment

0 Dec 23rd 2009 MLA Preliminary version

No part of this document may be reproduced or transmitted in any form or by any means, electronically or

mechanically, for any purpose, without the express written permission of KONTRON Technology A/S.

Trademark Acknowledgement:

Brand and product names are trademarks or registered trademarks of their respective owners.

Disclaimer:

KONTRON Technology A/S reserves the right to make changes, without notice, to any product, including

circuits and/or software described or contained in this manual in order to improve design and/or

performance.

Specifications listed in this manual are subject to change without notice. KONTRON Technology assumes no

responsibility or liability for the use of the described product(s), conveys no license or title under any patent,

products are free from patent, copyright, or mask work right infringement, unless otherwise specified.

Applications that are described in this manual are for illustration purposes only. KONTRON Technology A/S

makes no representation or warranty that such application will be suitable for the specified use without

further testing or modification.

Document details

KTD-N0793-0 Page 3

KTGM45 Users Guide

Life Support Policy

KONTRON Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN LIFE

SUPPORT DEVICES OR SYSTEMS WITHOUT EXPRESS WRITTEN APPROVAL OF THE GENERAL

MANAGER OF KONTRON Technology A/S.

As used herein:

Life support devices or systems are devices or systems which, (a) are intended for surgical implant into

body, or (b) support or sustain life and whose failure to perform, when properly used in accordance with

instructions for use provided in the labelling, can be reasonably expected to result in significant injury to the

user.

A critical component is any component of a life support device or system whose failure to perform can be

reasonably expected to cause the failure of the life support device or system, or to affect its safety or

effectiveness.

KONTRON Technology Technical Support and Services

If you have questions about installing or using your KONTRON Technology Product, check this User’s

Manual first – you will find answers to most questions here. To obtain support, please contact your local

Distributor or Field Application Engineer (FAE).

Before Contacting Support: Please be prepared to provide as much information as possible:

•CPU Board

1. Type.

2. Part Number (find PN on label)

3. Serial Number if available (find SN on label)

•Configuration

1. CPU Type, Clock speed

2. DRAM Type and Size.

3. BIOS Revision (Find the Version Info in the BIOS Setup).

4. BIOS Settings different than Default Settings (Refer to the BIOS Setup Section).

•System

1. O/S Make and Version.

2. Driver Version numbers (Graphics, Network, and Audio).

3. Attached Hardware: Harddisks, CD-rom, LCD Panels etc.

Warranty

KONTRON Technology warrants its products to be free from defects in material and workmanship during the

warranty period. If a product proves to be defective in material or workmanship during the warranty period,

KONTRON Technology will, at its sole option, repair or replace the product with a similar product.

Replacement Product or parts may include remanufactured or refurbished parts or components.

The warranty does not cover:

1. Damage, deterioration or malfunction resulting from:

A. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product

modification, or failure to follow instructions supplied with the product.

B. Repair or attempted repair by anyone not authorized by KONTRON Technology.

C. Causes external to the product, such as electric power fluctuations or failure.

D. Normal wear and tear.

E. Any other causes which does not relate to a product defect.

2. Removal, installation, and set-up service charges.

Exclusion of damages:

KONTRON TECHNOLOGY LIABILITY IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF

THE PRODUCT. KONTRON TECHNOLOGY SHALL NOT BE LIABLE FOR:

1. DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE PRODUCT, DAMAGES

BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, LOSS OF

PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF GOODWILL, INTERFERENCE WITH

BUSINESS RELATIONSHIPS, OR OTHER COMMERCIAL LOSS, EVEN IF ADVISED OF THEIR

POSSIBILITY OF SUCH DAMAGES.

2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.

3. ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY.

Document details

KTD-N0793-0 Page 4

KTGM45 Users Guide

» Table of Contents «

Introduction .............................................................................................. 8

1Installation procedure ....................................................................... 9

1.1 Installing the board........................................................................................................................ 9

1.2 Requirement according to EN60950........................................................................................... 10

2System specification ....................................................................... 11

2.1 Component main data................................................................................................................. 11

2.2 System overview......................................................................................................................... 14

2.3 Processor Support Table ............................................................................................................ 15

2.4 System Memory support ............................................................................................................. 16

2.5 KTGM45 Graphics Subsystem ................................................................................................... 18

2.5.1 Intel® GMA X4500HD................................................................................................................ 18

2.5.2 DVMT 5.0 support...................................................................................................................... 18

2.5.3 ADD2 card support .................................................................................................................... 19

2.5.4 PCIe Passive Graphic card support .......................................................................................... 19

2.6 Power Consumption.................................................................................................................... 20

3Connector Definitions ..................................................................... 22

3.1 Connector layout......................................................................................................................... 23

3.1.1 KTGM45/mITX........................................................................................................................... 23

3.1.2 KTGM45/Flex............................................................................................................................. 24

3.1.3 KTGM45 - IO Bracket area ........................................................................................................24

3.2 Power Connector (ATX/BTXPWR) ............................................................................................. 25

3.3 Keyboard and Mouse connectors ............................................................................................... 26

3.3.1 MINI-DIN Keyboard and Mouse Connector (KBD).................................................................... 26

3.3.2 Keyboard and Mouse pinrow Connector (KBDMSE) ................................................................ 26

3.4 Display connector........................................................................................................................ 27

3.4.1 CRT Connector (CRT) ............................................................................................................... 27

3.4.2 LVDS Flat Panel Connector (LVDS).......................................................................................... 28

3.4.3 TV-Out ....................................................................................................................................... 29

3.5 Firewire/IEEE1394 connectors ................................................................................................... 30

3.5.1 IEEE1394 connector (IEEE1304_1) .......................................................................................... 30

3.5.2 IEEE1394 connector (IEEE1304_0) .......................................................................................... 30

3.6 PCI-Express connectors ............................................................................................................. 31

KTD-N0793-0 Page 5

KTGM45 Users Guide

3.6.1 PCI-Express x16/SDVO Connector (PCIe x16/SDVO) ............................................................. 31

3.6.2 PCI-Express x4 Connector (PCIe x4)........................................................................................ 33

3.6.3 miniPCI-Express ........................................................................................................................ 34

3.7 Parallel ATA Hard Disk interface ................................................................................................35

3.7.1 IDE Hard Disk Connector (PATA) ............................................................................................. 36

3.7.2 Compact Flash Connector (CF)................................................................................................. 37

3.8 Serial ATA Hard Disk interface ................................................................................................... 38

3.8.1 SATA Hard Disk Connector (SATA0, SATA1, SATA4, SATA5)................................................ 38

3.9 Serial Ports.................................................................................................................................. 39

3.9.1 COM1 Connector....................................................................................................................... 39

3.9.2 COM2 COM3 and COM4 Header Connectors .......................................................................... 39

3.10 Ethernet Connectors ................................................................................................................... 40

3.10.1 Ethernet Connectors 1, 2 and 3 (ETHER1, ETHER2 and ETHER3) ........................................ 40

3.11 USB Connectors (USB) .............................................................................................................. 41

3.11.1 USB Connector 0/2 (USB0/2).................................................................................................... 41

3.11.2 USB Connector 1/3 (USB1/3).................................................................................................... 42

3.11.3 USB Connector 4/5 (USB4/5).................................................................................................... 42

3.11.4 USB Connector 6/7 (USB6/7).................................................................................................... 42

3.11.5 USB Connector 8/9 (USB8/9).................................................................................................... 43

3.11.6 USB Connector 10/11 (USB10/11)............................................................................................ 43

3.12 Audio Connectors........................................................................................................................ 44

3.12.1 Audio Speakers, Line-In, Line-Out and Microphone ................................................................. 44

3.12.2 CDROM Audio Input (CDROM) ................................................................................................. 45

3.12.3 Line2 and Mic2 .......................................................................................................................... 45

3.12.4 Audio Header (AUDIO_HEAD).................................................................................................. 46

3.13 Fan Connector (FAN_CPU) ........................................................................................................ 47

3.14 Clear CMOS Jumper (J13) .........................................................................................................48

3.15 TPM Connector (TPM)................................................................................................................ 49

3.16 SPI Connector (SPI) ................................................................................................................... 49

3.17 Front Panel Connector (FRONTPNL)......................................................................................... 50

3.18 Feature Connector (FEATURE).................................................................................................. 51

3.19 PCI Slot Connector (PCI Slot)..................................................................................................... 52

3.19.1 Signal Description – PCI Slot Connector................................................................................... 53

3.19.2 KTGM45 PCI IRQ & INT routing................................................................................................ 54

4Onboard - & mating connectors...................................................... 55

5System Resources.......................................................................... 56

5.1 Memory Map ............................................................................................................................... 56

KTD-N0793-0 Page 6

KTGM45 Users Guide

5.2 PCI Devices ................................................................................................................................ 57

5.3 Interrupt Usage ........................................................................................................................... 58

5.4 IO Map ........................................................................................................................................ 59

6BIOS ............................................................................................... 60

6.1 System Management BIOS (SMBIOS/DMI) ............................................................................... 60

6.2 Legacy USB Support .................................................................................................................. 60

6.3 BIOS Update ............................................................................................................................... 60

7BIOS setup ..................................................................................... 61

7.1 Introduction ................................................................................................................................. 61

7.2 Main Menu .................................................................................................................................. 61

7.3 Advanced Menu .......................................................................................................................... 62

7.3.1 Advanced settings – CPU Configuration ................................................................................... 63

7.3.2 Advanced settings – IDE Configuration..................................................................................... 64

7.3.3 Advanced settings – LAN Configuration.................................................................................... 68

7.3.4 Advanced settings – Configure Win627DHG Super IO Chipset................................................ 69

7.3.5 Advanced settings – Hardware Health Configuration................................................................ 70

7.3.6 Advanced settings – Voltage Monitor ........................................................................................ 71

7.3.7 Advanced settings – ACPI Settings........................................................................................... 72

7.3.8 Advanced settings – Intel AMT Configuration ........................................................................... 74

7.3.9 Advanced settings – Intel TXT(LT) Configuration ..................................................................... 75

7.3.10 Advanced settings – Intel VT-d Configuration ........................................................................... 75

7.3.11 Advanced settings – PCI Express Configuration....................................................................... 76

7.3.12 Advanced settings – Remote Access Configuration ................................................................. 77

7.3.13 Advanced settings – Trusted Computing................................................................................... 78

7.3.14 Advanced settings – USB Configuration ................................................................................... 79

7.3.15 Advanced settings – USB Mass Storage Device Configuration ................................................ 80

7.4 PCIpnp Menu .............................................................................................................................. 81

7.5 Boot Menu................................................................................................................................... 82

7.5.1 Boot – Boot Settings Configuration ........................................................................................... 83

7.5.2 Boot – Boot Device Priority........................................................................................................ 85

7.6 Security Menu ............................................................................................................................. 86

7.7 Chipset Menu .............................................................................................................................. 88

7.7.1 Advanced Chipset Settings – North Bridge Chipset Configuration ........................................... 89

7.7.2 Advanced Chipset … – North Br. … – Video Function Configuration ....................................... 90

7.7.3 Advanced Chipset Settings – South Bridge Chipset Configuration........................................... 92

7.7.4 Advanced Chipset Settings – ME Subsystem Configuration..................................................... 93

7.8 Exit Menu .................................................................................................................................... 94

KTD-N0793-0 Page 7

KTGM45 Users Guide

8AMI BIOS Beep Codes ................................................................... 95

9OS Setup ........................................................................................ 96

KTD-N0793-0 Page 8

KTGM45 Users Guide

Introduction

This manual describes the KTGM45/mITX and KTGM45/Flex boards made by KONTRON Technology A/S.

The boards will also be denoted KTGM45 family if no differentiation is required.

The KTGM45 boards supports the Intel® Core™ 2 Extreme Mobile Processor (Penryn), the Intel® Core™2

Quad Mobile processor (Penryn) Q9100, the Intel® Core™2 Duo Mobile processor (Penryn) and Intel®

Celeron® (Meron).

KTGM45 family differences Format PCI PCIe x4 miniPCIe CF

KTGM45/mITX mITX 1 - 1 1

KTGM45/Flex Flex 2 1 - -

Use of this Users Guide implies a basic knowledge of PC-AT hard- and software. This manual is focused on

describing the KTGM45 Board’s special features and is not intended to be a standard PC-AT textbook.

New users are recommended to study the short installation procedure stated in the following chapter before

switching-on the power.

All configuration and setup of the CPU board is either done automatically or manually by the user via the

CMOS setup menus. Only exception is the Clear CMOS jumper (J13).

Introduction

KTD-N0793-0 Page 9

KTGM45 Users Guide

Warning: When mounting the board to chassis etc. please notice that the board contains

components on both sides of the PCB which can easily be damaged if board is handled

without reasonable care. A dama

ed com

onent can result in malfunction or no function at all.

1 Installation procedure

1.1 Installing the board

To get the board running, follow these steps. In some cases the board shipped from KONTRON has already

components like DRAM, CPU and cooler mounted. In this case relevant steps below, can be skipped.

1. Turn off the PSU (Power Supply Unit)

2. Insert the DDR3 DIMM 240pin DRAM module(s)

Be careful to push it in the slot(s) before locking the tabs. For a list of approved DDR3 DIMM modules

contact your Distributor or FAE. DDR3-800/1066 DIMM 240pin (PC3-6400/PC3-8500) are supported.

3. Install the processor

The CPU is keyed and will only mount in the CPU socket in one way. Use the handle to open/ close the

CPU socket. Penryn and Meron CPU’s via mPGA479 ZIF Socket are supported, refer to supported

processor overview for details.

4. Cooler Installation

Use heat paste or adhesive pads between CPU and cooler and connect the Fan electrically to the

FAN_CPU connector.

5. Connecting Interfaces

Insert all external cables for hard disk, keyboard etc. A CRT monitor must be connected in order to

change CMOS settings.

6. Connect and turn on PSU

Connect PSU to the board by the ATX/BTXPWR and the 4-pin ATX+12V connectors. Alternatively use only

the 4-pin ATX+12V connector if single voltage operation (+12V +/-5%) is requested. Notice that single

voltage operation has limited power support for add-on cards etc. Turn on power.

7. Power Button

The PWRBTN_IN must be toggled to start the Power supply; this is done by shorting pins 16

(PWRBTN_IN) and pin 18 (GND) on the FRONTPNL connector (see Connector description). A “normally

open” switch can be connected via the FRONTPNL connector.

8. BIOS Setup

Enter the BIOS setup by pressing the <Del> key during boot up.

Enter Exit Menu and Load Optimal Defaults.

Refer to the “BIOS Configuration / Setup“ section of this manual for details on BIOS setup.

9. Mounting the board to chassis

When fixing the Motherboard on a chassis it is recommended using screws with integrated washer and

having diameter of ~7mm.



Note: Do not use washers with teeth, as they can damage the PCB and may cause short circuits.

Warning: Do not use ATX/BTX PSU without 3.3V monitoring watchdog, which is

standard feature in ATX/BTX PSU.

Running the board without 3.3V connected will damage the board after a few minutes.

Installation procedure

Note: To clear all CMOS settings, including Password protection, move the Clear CMOS jumper in the

Clear CMOS position (with or without power) for ~10 sec. This will Load Failsafe Defaults and make sure

Secure CMOS is disabled.

KTD-N0793-0 Page 10

KTGM45 Users Guide

1.2 Requirement according to EN60950

Users of KTGM45 family boards should take care when designing chassis interface connectors in order to

fulfil the EN60950 standard:

Lithium Battery precautions:

CAUTION!

Danger of explosion if battery is incorrectly

replaced.

Replace only with same or equivalent type

recommended by manufacturer.

Dispose of used batteries according

to the manufacturer’s instructions.

VORSICHT!

Explosionsgefahr bei unsachgemäßem Austausch

der Batterie.

Ersatz nur durch den selben oder einen vom

Hersteller empfohlenen gleichwertigen Typ.

Entsorgung gebrauchter Batterien nach

Angaben des Herstellers.

ADVARSEL!

Lithiumbatteri – Eksplosionsfare ved fejlagtig

håndtering.

Udskiftning må kun ske med batteri

af samme fabrikat og type.

Levér det brugte batteri tilbage til leverandøren.

ADVARSEL

Eksplosjonsfare ved feilaktig skifte av batteri.

Benytt samme batteritype eller en tilsvarende

type anbefalt av apparatfabrikanten.

Brukte batterier kasseres i henhold til fabrikantens

instruksjoner.

VARNING

Explosionsfara vid felaktigt batteribyte.

Använd samma batterityp eller en ekvivalent

typ som rekommenderas av apparattillverkaren.

Kassera använt batteri enligt fabrikantens

instruktion.

VAROITUS

Paristo voi räjähtää, jos se on virheellisesti

asennettu.

Vaihda paristo ainoastaan laltevalmistajan

suosittelemaan

tyyppiln. Hävitä käytetty paristo valmistajan

ohjeiden

mukaisesti.

When an interface/connector has a VCC (or other power) pin, which is directly connected to a power

plane like the VCC plane:

To protect the external power lines of the peripheral devices, the customer has to take care about:

•That the wires have suitable rating to withstand the maximum available power.

•That the enclosure of the peripheral device fulfils the fire protecting requirements of IEC/EN 60950.

Installation procedure

Andere Handbücher für KTGM45/mITX

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kontron Computerhardware Handbücher

Kontron

Kontron COMe-bID7 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

Kontron

Kontron aFLAT Series Bedienungsanleitung

Kontron

Kontron COM-HPC Bedienungsanleitung

Kontron

Kontron coolMonster/PM Bedienungsanleitung

Kontron

Kontron CP3002 Bedienungsanleitung

Kontron

Kontron COMe-cBTi6R E3845 8GB/16S Bedienungsanleitung

Kontron

Kontron COMe-cDC2 Bedienungsanleitung

Kontron

Kontron AdvancedTCA AT8001 Bedienungsanleitung

Kontron

Kontron KBox C-102 Series Bedienungsanleitung

Kontron

Kontron CP3003-SA Bedienungsanleitung

Kontron

Kontron ePanel-mgx Bedienungsanleitung

Kontron

Kontron CP3002-RC Bedienungsanleitung

Kontron

Kontron COMe-mTT10 Bedienungsanleitung

Kontron

Kontron nanoETXexpress-HMI Baseboard Bedienungsanleitung

Kontron

Kontron ETX-CD Bedienungsanleitung

Kontron

Kontron cPCI-MXS64GX Produkthandbuch

Kontron

Kontron AT8902M Bedienungsanleitung

Kontron

Kontron MOPSlcdGX1 Bedienungsanleitung

Kontron

Kontron CP6016 Bedienungsanleitung

Kontron

Kontron SMARC-sAMX8 Bedienungsanleitung

Kontron

Kontron microETXexpress-SP Bedienungsanleitung

Kontron

Kontron CP3003-SA Bedienungsanleitung

Kontron

Kontron AM4024 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung

Measurement Computing

Measurement Computing CIO-EXP-RTD16 Bedienungsanleitung

Matrox

Matrox DigiSuite DigiMix Installations- und Betriebsanleitung