Korenix JetPort 5601 Bedienungsanleitung

Korenix JetPort Series Demo Box Quick Installation Guide

1. Introduction

In order to let customers understand Korenix product’s features and applications, Korenix demo box

shows how to connect with JetPort, JetNet and JetCon. In the Demo box, Korenix organizes Korenix

products for the best results, and impresses customers with not only product introduction, but also

live demonstration.

2. Demo Kits

2.1 Demo Units: JetPort 5601



5601f



5604



JetNet2005



JetCon1301

2.2 Accessory: Mounted AC(110-240V) to DC(24V) power input, power terminal, JetCon2204, Card

Reader(with 12V power adapter and Serial cable), Fiber/UTP cables, power cord.

3. Hardware Installation

Below is the block diagram and step by step to construct your demo box.

3.1 5604:link JetNet2005 with two RJ-45 copper



one in RTTD path

3.2 5601:link JetNet2005 with RJ-45 copper

3.3 5601f:link JetCon1301 with Fiber

3.4 JetCon1301:link JetNet2005 with RJ-45 copper

3.5 Card Reader:

3.6 Power On your Devices:

3.7 Check the status of the devices:

4. Software Installation

Default IP of the JetPort 5601&5601f&5604 is: 192.168.10.2. Please assign new IP to the JetPort

devices by JetPort Commander or web UI.

Note: SSH login needs username and password which are: admin/admin

Preparation for Web Interface

1. Launch the web browser on the PC.

2. Type https:// device ip address and press enter.(default https://192.168.10.2)

JetPort Commander

JetPort commander is a windows utility which can help customers control JetPort series products

convenient and quickly. Please install this utility in your PC first.

You can find the new firmware and JetPort Commander in the CD or the Korenix web site.

Korenix Web Site :http://www.korenix.com

5. Demo Program

5.1 Virtual COM

Establish a Vcom with JetPort Commander

Open Windows hyper terminal and set baudrate:9600 Data bit:8 Parity:No Stop Bits:1

Swipe the Card and see the Data transfer

5.2 RTTD

Primary Path: When the dual Ethernet ports are connected to different switches, only

one path will be activated.

Backup Path: The un-activated path will be the backup path.

Auto-recovery: When the primary path is broken, the backup path will recover Ethernet

connection in less than 200ms.

5.3 Serial Tunnel

No PC or driver is needed

Tip: For setting quickly and convenient , you can use JetPort Commander > Setup Wizard >

Serial Tunnel Wizard

Andere Handbücher für JetPort 5601

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Korenix Server Handbücher

Korenix

Korenix JetPort 5801 Bedienungsanleitung

Korenix

Korenix JetPort 5601 Bedienungsanleitung

Korenix

Korenix 5804 Bedienungsanleitung

Korenix

Korenix JetI/O 6510 Bedienungsanleitung

Korenix

Korenix JetPort 5208 Bedienungsanleitung

Korenix

Korenix JetI/O 6510 Bedienungsanleitung

Korenix

Korenix AnyBus-X Handbuch

Korenix

Korenix JetPort 5201 Bedienungsanleitung

Korenix

Korenix JetPort 5601 Bedienungsanleitung

Korenix

Korenix JetPort 5201 Bedienungsanleitung

Korenix

Korenix JetPort 5601 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung