Korg TM-50 Bedienungsanleitung

Precautions

Location

Using the unit in the following locations can

result in a malfunction.

• In direct sunlight

• Locations of extreme temperature or humidity

• Excessively dusty or dirty locations

• Locations of excessive vibration

• Close to magnetic ﬁelds

Power supply

Be sure to turn the power switch to OFF when the

unit is not in use. Remove the battery in order to

prevent it from leaking when the unit is not in use

for extended periods.

Interference with other electrical devices

Radios and televisions placed nearby may experi-

ence reception interference. Operate this unit at a

suitable distance from radios and televisions.

Handling

To avoid breakage, do not apply excessive force

to the switches or controls.

Care

If the exterior becomes dirty, wipe it with a clean,

dry cloth. Do not use liquid cleaners such as

benzene or thinner, or cleaning compounds or

ﬂammable polishes.

Keep this manual

After reading this manual, please keep it for later

reference.

Keeping foreign matter out of your

equipment

Never set any container with liquid in it near this

equipment. If liquid gets into the equipment, it

could cause a breakdown, ﬁre, or electrical shock.

Be careful not to let metal objects get into the

equipment.

THE FCC REGULATION WARNING (for USA)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursu-

ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

● Reorient or relocate the receiving antenna.

● Increase the separation between the equipment and receiver.

● Connect the equipment into an outlet on a circuit different from that to which the receiver is con-

nected.

● Consult the dealer or an experienced radio/TV technician for help.

Unauthorized changes or modiﬁcation to this system can void the user’s authority to operate this

equipment.

Notice regarding disposal (EU only)

When this “crossed-out wheeled bin”

symbol is displayed on the product,

owner’s manual, battery, or battery

package, it signiﬁes that when you

wish to dispose of this product, manu-

al, package or battery you must do so

in an approved manner. Do not

discard this product, manual, package

or battery along with ordinary household

waste. Disposing in the correct manner will

prevent harm to human health and potential

damage to the environment. Since the correct

method of disposal will depend on the

applicable laws and regulations in your

locality, please contact your local

administrative body for details. If the battery

contains heavy metals in excess of the

regulated amount, a chemical symbol is

displayed below the “crossed-out wheeled

bin” symbol on the battery or battery

package.

IMPORTANT NOTICE TO CONSUMERS

This product has been manufactured accord-

ing to strict speciﬁcations and voltage require-

ments that are applicable in the country in

which it is intended that this product should

be used. If you have purchased this product

via the internet, through mail order, and/or

via a telephone sale, you must verify that this

product is intended to be used in the country

in which you reside.

WARNING: Use of this product in any country

other than that for which it is intended could

be dangerous and could invalidate the manu-

facturer’s or distributor’s warranty. Please

also retain your receipt as proof of purchase

otherwise your product may be disqualiﬁed

from the manufacturer’s or distributor’s war-

ranty.

All product names and company names are the

trademarks or registered trademarks of their

respective owners.

Table of Contents

Main Features ................................. 6

Installing batteries ......................... 6

Using the stand ............................... 7

Parts of the TM-50 and what they do ...

Turning the power on/off ............... 8

To turn the power on ...........................8

Turning the tuner off ............................9

Turning off the metronome ...............9

Connections .................................... 9

If you want to connect an instru-

ment or contact mic etc ......................9

Connecting headphones ....................9

Using the tuner ............................. 10

Tuning while watching the meter

(Meter mode) ....................................... 10

Tuning to a reference tone (Sound

Out mode) ............................................. 11

Tuning using the reference tone and

meter (Sound Back mode)............... 12

Using the metronome .................. 13

Setting the tempo and time signa-

ture (Beat mode) ................................. 13

Using tap tempo ................................. 14

Using the tuner and metronome

simultaneously ............................. 15

Using the tuner and metronome

simultaneously .................................... 15

Backlight ....................................... 17

Speciﬁcations ................................ 17

Thank you for purchasing the Korg Combo

Tuner Metronome TM-50.

Main Features

With the TM-50 you can tune instruments

using the internal mic or by connecting them

to the INPUT jack.

You can use the tuner and metronome indi-

vidually or simultaneously.

Installing batteries

1. Slide the baery compartment cover on

the back of the TM-50 in direction “a” as

shown in the illustration and li up the

cover in direction “b.”

2. Insert the baeries, making sure to ob-

serve the correct polarity.

If the unit malfunctions try removing and

then reinstalling the baeries.

When the baeries become depleted, a

baery symbol will appear on the le

side of the display. When this occurs, it’s

time to replace the baeries.

Using the stand

You can use the stand provided on the back

of the TM-50 to tilt it back at an angle for easy

viewing.

Parts of the TM-50 and what they do

5 6 7 8

10 11

1. TUNER ON button

2. CALIB/NOTE p, q buttons

3. SOUND button

4. SOUND BACK button

5. Backlight button

6. Mic

7. Speaker

8. START/STOP button

9. Tuning guide

10.

Volume

11.

METRONOME ON button

12.

BEAT p, q buttons

13.

TEMPO p, q buttons

14.

TAP TEMPO button

15.

PHONES jack

16.

INPUT jack

17.

Display

Reference pitch display

Note display

Tempo display

Beat display

Turning the power on/off

To turn the power on

Press either the TUNER ON buon or the

METRONOME ON buon and the power

will turn on.

When the TUNER ON buon is pressed,

the tuner starts in the Meter mode and

“” will appear on the

display. When the METRONOME ON but-

ton is pressed, the metronome starts and

“” will appear on the display.

The TM-50 can use the tuner and metronome

simultaneously.

The TUNER ON buon and the MET-

RONOME ON buon is designed lower

than other buons so that the power is

not turned on involuntarily when the

TM-50 is placed in your pocket or in a

bag. To turn the device on or o, push in

the power buon.

Turning the tuner off

When the tuner is in use, press the TUNER

ON buon to turn o the power. The tuner

will also turn o automatically if it’s not in

use for twenty minutes.

Turning off the metronome

When the metronome is in use, press the

METRONOME ON buon to turn o the

power. The metronome will also turn o au-

tomatically if not in use for twenty minutes.

Connections

If you want to connect an

instrument or contact mic etc

If you want to tune an instrument with a

pickup, such as an electric guitar, connect a

cable to your instrument, and plug the cable

into the TM-50’s INPUT jack.

The INPUT jack is only for a 1/4" mono

cable. Stereo (TRS) cables cannot be used.

If you want to tune your instrument using a

Korg contact mic (separately sold), plug the

contact mic into the TM-50’s INPUT jack.

If a device is not connected to the INPUT

jack, tuning will be performed by the

internal mic.

Connecting headphones

You can connect headphones with a 1/8"

mini-plug to the PHONES jack.

When plugged in, no sound will be heard

from the speaker. Use the volume control to

adjust the volume of the headphones output.

Using the tuner

Tuning while watching the meter

(Meter mode)

1. Connect your instrument cable or contact

mic to the TM-50’s INPUT jack.

If a device is not connected to the

INPUT jack, tuning will be performed

by the internal mic.

2. Press the TUNER ON buon.

“” will appear at the top

of the display and the calibration (refer-

ence pitch) will be displayed below that.

3. To change the calibration, press the

CALIB/NOTE p or q buon.

The calibration value increases and

decreases in units of 1 Hz. By pressing and

holding these buons, you can increase or

decrease the value continuously. This set-

ting is stored even when the power is o.

4. Play a single note on your instrument.

The closest note to the input sound will

appear in the center of the display. Tune

your instrument to the correct pitch, so

that the desired note name appears.

If you’re using the internal mic, place

your instrument as close as possible

to the mic so that extraneous sound is

not picked up while tuning.

5. While playing a single note on your

instrument, tune your instrument so that

the tip of the meter indicates “q” and

the center indicator of the tuning guide

is lit up.

The le tuning guide indicator will light

up if the pitch of your instrument is at,

and the right indicator will light up if the

Inhaltsverzeichnis

Sprachen:

Andere Korg Tuner Handbücher

Korg

Korg Wi-Tune WR-01 Bedienungsanleitung

Korg

Korg GA-30 Bedienungsanleitung

Korg

Korg PitchHawk-G2 Bedienungsanleitung

Korg

Korg Pitchclip 2+ Bedienungsanleitung

Korg

Korg PitchHawk-U Bedienungsanleitung

Korg

Korg DTR-1000 Bedienungsanleitung

Korg

Korg DTR-1000 Bedienungsanleitung

Korg

Korg GA-50 Bedienungsanleitung

Korg

Korg AW-1 Bedienungsanleitung

Korg

Korg AW-LT100M Bedienungsanleitung

Korg

Korg Slimpitch Bedienungsanleitung

Korg

Korg Rimpitch-C Bedienungsanleitung

Korg

Korg CA-2 Bedienungsanleitung

Korg

Korg PC-O Bedienungsanleitung

Korg

Korg OT-12M Bedienungsanleitung

Korg

Korg HeadTune HT-G1 Bedienungsanleitung

Korg

Korg MiniPitch Bedienungsanleitung

Korg

Korg AW-LT100G Bedienungsanleitung

Korg

Korg WDT-1 Bedienungsanleitung

Korg

Korg CA-1 Bedienungsanleitung

Korg

Korg AW-OTG Bedienungsanleitung

Korg

Korg GT-120 Bedienungsanleitung

Korg

Korg EFG5J2 Bedienungsanleitung

Korg

Korg Pitchback X mini Bedienungsanleitung

Beliebte Tuner Handbücher anderer Marken

Tunersys

Tunersys WS16 1 Bedienungsanleitung

Arcam

Arcam DT91 Bedienungsanleitung

Magnum

Magnum MD 102T Bedienungsanleitung

HDHomeRun

HDHomeRun 20121008 Bedienungsanleitung

Crestron

Crestron C2N-TXM Bedienungsanleitung

Eico

Eico HFT-92 Bedienungsanleitung

MFJ

MFJ MFJ-928 Bedienungsanleitung

NAD

NAD C 445 Bedienungsanleitung

Sony

Sony ST-SA5ES Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SC-FM1 Bedienungsanleitung

Antique Automobile Radio

Antique Automobile Radio 283501B Bedienungsanleitung

Monacor

Monacor PA-1200R Bedienungsanleitung

Technics

Technics ST-X301L Bedienungsanleitung

Manhattan

Manhattan 176156 Bedienungsanleitung

Marantz

Marantz ST-15S1 Bedienungsanleitung

Harman Kardon

Harman Kardon TU915 Bedienungsanleitung

Teac

Teac T-1D Bedienungsanleitung

Pioneer

Pioneer GEX-P700DAB Bedienungsanleitung