Kramer PT-101HDCP Bedienungsanleitung

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

PT-101HDCP

DVI Repeater

P/N: 2900-000511 Rev 4

PT-101HDCP – Contents

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 3

2.3 Recycling Kramer Products 3

3Overview 4

3.1 Defining the PT-101HDCP DVI Repeater 5

4Connecting the PT-101HDCP 6

5Technical Specifications 7

Figures

Figure 1: PT-101HDCP DVI Repeater 5

Figure 2: Connecting the PT-101HDCP DVI Repeater 6

PT-101HDCP - Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 14 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11:

Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and

GROUP 14: Collaboration.

Congratulations on purchasing your Kramer PT-101HDCP DVI Repeater, which is

ideal for the following typical applications:

Multimedia installations

Home cinema installations

PT-101HDCP - Getting Started

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

Go to http://www.kramerelectronics.com/support/product_downloads.asp

to check for up-to-date user manuals, application programs, and to check if

firmware upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

Do not secure the cables in tight bundles or roll the slack into tight coils

Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

Position your Kramer PT-101HDCP away from moisture, excessive sunlight

and dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

PT-101HDCP - Getting Started

2.2 Safety Instructions

Caution:

There are no operator serviceable parts inside the unit

Warning:

Use only the Kramer Electronics input power wall

adapter that is provided with the unit

Warning:

Disconnect the power and unplug the unit from the wall

before installing

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

aims to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country

go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

PT-101HDCP - Overview

3 Overview

The PT−101HDCP is a line driver/repeater for DVI−D video signals that extends

the standard transmission range of standard DVI distances from 5m to up to 10m

(16.4ft to up to 32.8ft). The unit reclocks and equalizes the signal enabling multiple

units to be cascaded. It supports the DDWG DVI 1.0 standard and has two DVI-I

connectors, that are compatible with all types of DVI cables.

The PT-101HDCP can be powered by an external power supply, or directly—from

DVI connectors on Kramer Scalers, as well as from some desktop DVI cards—

without requiring an external power supply

Note that only the digital signal (DVI-D) is available on the DVI connector.

More specifically the PT-101HDCP features:

A maximum data rate of 6.75Gbps (2.25Gbps per graphic channel)

HDTV compatibility

HDCP compliance

HDMI support for HDMI Compressed Audio Channels

Kramer Equalization & re-Klocking™ Technology that rebuilds the digital

signal to travel longer distances

Power via AC adapter or by DVI signal

Double the DVI range (resolution dependent) from approximately 16ft (4.9m)

to approximately 32ft (9.8m)

Ultra-Compact Pico TOOLS™ where four units can be rack mounted

side−by−side in a 1U rack space with the optional RK−4PT rack adapter

PT-101HDCP - Overview

3.1 Defining the PT-101HDCP DVI Repeater

This section defines the PT-101HDCP.

Figure 1: PT-101HDCP DVI Repeater

Feature

Function

OUTPUT DVI Connector

Connect to the DVI acceptor

5V DC

+5V DC connector for powering the unit

INPUT DVI Connector

Connect to the DVI source

ON LED

Illuminates when receiving power. The POWER LED is

colored:

Yellowish-green, when the 5V DC power source is connected

but no input signal is received

Red, when an input signal is received and the 5V DC power

source is disconnected

Orange when both the 5V DC power source is connected and

an input signal is received

PT-101HDCP - Connecting the PT-101HDCP

4 Connecting the PT-101HDCP

Always switch off the power to each device before connecting it to your

PT-101HDCP. After connecting your PT-101HDCP, connect its power

and then switch on the power to each device.

To connect the PT-101HDCP, as illustrated in the example in Figure 2, do the

following:

1. Connect the DVI source (for example, a DVI graphics source) to the INPUT

connector.

2. Connect the OUTPUT connector to a DVI acceptor (for example, a display).

3. Connect the 5V DC power adapter to the power socket on the PT-101HDCP

and connect the adapter to the mains electricity.

Figure 2: Connecting the PT-101HDCP DVI Repeater

PT-101HDCP - Technical Specifications

5 Technical Specifications

INPUT:

1 DVI, 1.2Vpp on a DVI Molex 24-pin female connector;

DDC signal 5Vpp (TTL)

OUTPUT:

1 DVI, 1.2Vpp on DVI Molex 24-pin female connectors;

DDC signal 5Vpp (TTL)

MAX. DATA RATE:

6.75Gbps (2.25Gbps per graphic channel).

POWER CONSUMPTION:

5V DC, 230mA

OPERATING TEMPERATURE:

0° to +40°C (32° to 104°F)

STORAGE TEMPERATURE:

-40° to +70°C (-40° to 158°F)

HUMIDITY:

10% to 90%, RHL non-condensing

DIMENSIONS:

6.22cm x 5.23cm x 3.20cm (2.5" x 2.1" x 1.3"), W, D, H

WEIGHT:

0.07kg (0.16lbs) approx.

INCLUDED ACCESSORIES:

Power supply, mounting bracket

OPTIONS:

RK−4PT 19" rack adapter

Specifications are subject to change without notice at http://www.kramerelectronics.com

Andere Handbücher für PT-101HDCP

Inhaltsverzeichnis

Andere Kramer Repeater Handbücher

Kramer

Kramer PT-101HDMI Bedienungsanleitung

Kramer

Kramer FireWire VS-30FW Bedienungsanleitung

Kramer

Kramer DigiTOOLS VA-130FW Bedienungsanleitung

Kramer

Kramer BTX KRA-PT101H2 Bedienungsanleitung

Kramer

Kramer FireWire VS-30FW Bedienungsanleitung

Kramer

Kramer PT-101H Bedienungsanleitung

Kramer

Kramer PT-4iREX Bedienungsanleitung

Kramer

Kramer PT-4iREX Bedienungsanleitung

Kramer

Kramer PT-101Hxl Bedienungsanleitung

Kramer

Kramer PT-4 iREX Bedienungsanleitung

Kramer

Kramer PT-101H4 Bedienungsanleitung

Kramer

Kramer DigiTOOLS VS-40FW Bedienungsanleitung

Kramer

Kramer PT-871/2xr-KIT Bedienungsanleitung

Kramer

Kramer PT-101HDCP Bedienungsanleitung

Kramer

Kramer PT-101H2 Bedienungsanleitung

Kramer

Kramer PT-101H2 Bedienungsanleitung

Kramer

Kramer PT-5T Bedienungsanleitung

Kramer

Kramer PT-101UHD Bedienungsanleitung

Kramer

Kramer PT-5T Bedienungsanleitung

Kramer

Kramer PT-101DP Bedienungsanleitung

Kramer

Kramer Pico TOOLS PT101DVI Bedienungsanleitung

Kramer

Kramer TP-873xr Bedienungsanleitung

Kramer

Kramer PT-4 iR Bedienungsanleitung

Beliebte Repeater Handbücher anderer Marken

Gigaset

Gigaset 108 Bedienungsanleitung

Kenwood

Kenwood TKR-750-850 Stücklistenhandbuch

Asus

Asus RP-AC51 Bedienungsanleitung

Exibel

Exibel HRP0101 Bedienungsanleitung

Kidde

Kidde Vega Bedienungsanleitung

Telcosat

Telcosat RBB 850 Installationsanleitung

York

York Universal LINC485 Bedienungsanleitung

MIKOM

MIKOM MRx01B Power Series Bedienungsanleitung

Simrad

Simrad RD 301 Bedienungsanleitung

Tait

Tait TB7304 Bedienungsanleitung

R-tron

R-tron RSN-CDMA-37-C Bedienungsanleitung

Inventronics

Inventronics DALI REPEATER SO Bedienungsanleitung

XFP

XFP 16 Bedienungsanleitung

Andrew

Andrew MRx18 Bedienungsanleitung

COMBA

COMBA RXA3748 Bedienungsanleitung

ADRF

ADRF SDR-ICS-43 Bedienungsanleitung

Teltonika

Teltonika WRP100 Bedienungsanleitung

U-Prox

U-Prox HW Bedienungsanleitung