Kramer PT-4iREX Bedienungsanleitung

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

PT-4iREX

IR Repeater

P/N: 2900-000283 Rev 5

PT-4iREX – Contents i

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Recycling Kramer Products 3

3Overview 4

3.1 Defining the PT-4iREX IR Repeater 5

4Connecting the PT-4iREX 6

5Technical Specifications 8

Figures

UFigure 1: PT-4iREX IR RepeaterU5

UFigure 2: Connecting the IR EmitterU6

UFigure 3: Connecting the PT-4iREX IR RepeaterU7

PT-4iREX - Introduction 1

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:

Sierra Products.

Congratulations on purchasing your Kramer PT-4iREX IR Repeater, which is ideal

for the following typical applications:

•High-quality home theater installations

•Studios, airports, offices and hospitals

•Security and military applications

2 PT-4iREX - Getting Started

2 Getting Started

We recommend that you:

•Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

•Review the contents of this user manual

•Use Kramer high-performance, high-resolution cables

Go to http://www.kramerelectronics.com to check for up-to-date

user manuals, application programs, and to check if firmware

upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

•Use only good quality connection cables to avoid interference, deterioration

in signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

•Do not secure the cables in tight bundles or roll the slack into tight coils

•Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

•Position your Kramer PT-4iREX away from moisture, excessive sunlight and

dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

Caution: No operator serviceable parts inside the unit

Warning: Use only the Kramer Electronics input power wall

adapter that is provided with the unit

Warning: Disconnect the power and unplug the unit from the wall

before installing

PT-4iREX - Getting Started 3

2.2 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

aims to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country

go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

4 PT-4iREX - Overview

3 Overview

The PT-4 iREX is an IR repeater that lets you control up to four machines via their

remote control transmitters from a distance.

For example, a video player, DVD player, air conditioning system, and any other remote

controlled machine.

In particular, the PT-4 iREX:

•Lets you operate machines that are stacked away in closets, cabinets, and

even other rooms

•Can operate at a distance of approximately 75 meters by using the IR

emitter extension cables between the controlled machine and the PT-4 iREX

•Has an IR sensor

•Has an external IR receiver (model C-A35M/IRR-03) that lets you control the

PT-4 iREX from a distance of approximately 30 meters

•Is 12V DC fed

PT-4iREX - Overview 5

3.1 Defining the PT-4iREX IR Repeater

This section defines the PT-4iREX.

Figure 1: PT-4iREX IR Repeater

# Feature Function

1 OUT 3.5mm Mini Connector Connect to the IR emitter cable (from 1 to 4)

2 12V DC +12V DC connector for powering the unit

3 EXT. 3.5mm Mini Connector Connect to an external remote IR receiver unit for

controlling the machine via an IR remote controller

(instead of using the front panel IR receiver)

Optional. Can be used instead of the front panel (built-in)

IR IN receiver to remotely control the unit. Refer to the

External Remote IR Receiver C-A35M/IRR-03 C-

A35M/IRR-50 Installation Instructions for details

4 IR IN IR sensor red glass window

5 SIGNAL LED Lights when an IR link is established

6 ON LED Lights when the unit is powered

6 PT-4iREX - Connecting the PT-4iREX

4 Connecting the PT-4iREX

Always switch off the power to each device before connecting it to your

PT-4iREX. After connecting your PT-4iREX, connect its power and

then switch on the power to each device.

To connect the PT-4 iREX IR Repeater, as illustrated in the example in Figure 3,

do the following:

1. Connect the OUT (up to four IR receivers) 3.5mm mini connector (from 1 to

4) to the following IR receivers via the IR emitter cable (see Figure 2):

Stick the IR emitter to the IR receiver window (usually located on the front panel of the

video player).

OUT 1 to a DVD player

OUT 2 to a video player

OUT 3 to an amplifier

OUT 4 to a plasma display

2. Connect the 12V DC power adapter to the power socket and connect the

adapter to the mains electricity.

Figure 2: Connecting the IR Emitter

To operate any of the connected machines, use a remote control (the machine’s

original remote control or a universal remote control) pointed to the IR Repeater

(or the external IR remote receiver, model C-A35M/IRR-03) that is located at a

place of your convenience. The IR signal from the remote control is transmitted

from the PT-4 iREX, via an IR emitter cable, to the appropriate machine.

IR Emitter

PT-4iREX - Connecting the PT-4iREX 7

Figure 3: Connecting the PT-4iREX IR Repeater

An external Remote IR receiver can be connected (once the Remote IR Receiver

cable is connected, the built-in IR receiver is disabled) to the EXT. connector,

letting you control the PT-4 iREX from a distance (with model C-A35M/IRR-03) of

approximately 30 meters.

Andere Handbücher für PT-4iREX

Inhaltsverzeichnis

Andere Kramer Repeater Handbücher

Kramer

Kramer FireWire VS-30FW Bedienungsanleitung

Kramer

Kramer PT-101UHD Bedienungsanleitung

Kramer

Kramer DigiTOOLS VS-40FW Bedienungsanleitung

Kramer

Kramer PT-4 iREX Bedienungsanleitung

Kramer

Kramer DigiTOOLS VA-130FW Bedienungsanleitung

Kramer

Kramer PT-101HDCP Bedienungsanleitung

Kramer

Kramer TP-873xr Bedienungsanleitung

Kramer

Kramer PT-101DP Bedienungsanleitung

Kramer

Kramer PT-101H2 Bedienungsanleitung

Kramer

Kramer PT-4iREX Bedienungsanleitung

Kramer

Kramer PT-4 iR Bedienungsanleitung

Kramer

Kramer Pico TOOLS PT101DVI Bedienungsanleitung

Kramer

Kramer PT-5T Bedienungsanleitung

Kramer

Kramer PT-5T Bedienungsanleitung

Kramer

Kramer PT-871/2xr-KIT Bedienungsanleitung

Kramer

Kramer PT-101HDCP Bedienungsanleitung

Kramer

Kramer FireWire VS-30FW Bedienungsanleitung

Kramer

Kramer PT-101H Bedienungsanleitung

Kramer

Kramer PT-101Hxl Bedienungsanleitung

Kramer

Kramer PT-101H4 Bedienungsanleitung

Kramer

Kramer PT-101HDMI Bedienungsanleitung

Kramer

Kramer PT-101H2 Bedienungsanleitung

Kramer

Kramer BTX KRA-PT101H2 Bedienungsanleitung

Beliebte Repeater Handbücher anderer Marken

Gigaset

Gigaset 108 Bedienungsanleitung

Kenwood

Kenwood TKR-750-850 Stücklistenhandbuch

Asus

Asus RP-AC51 Bedienungsanleitung

Exibel

Exibel HRP0101 Bedienungsanleitung

Kidde

Kidde Vega Bedienungsanleitung

Telcosat

Telcosat RBB 850 Installationsanleitung

York

York Universal LINC485 Bedienungsanleitung

MIKOM

MIKOM MRx01B Power Series Bedienungsanleitung

Simrad

Simrad RD 301 Bedienungsanleitung

Tait

Tait TB7304 Bedienungsanleitung

R-tron

R-tron RSN-CDMA-37-C Bedienungsanleitung

Inventronics

Inventronics DALI REPEATER SO Bedienungsanleitung

XFP

XFP 16 Bedienungsanleitung

Andrew

Andrew MRx18 Bedienungsanleitung

COMBA

COMBA RXA3748 Bedienungsanleitung

ADRF

ADRF SDR-ICS-43 Bedienungsanleitung

Teltonika

Teltonika WRP100 Bedienungsanleitung

U-Prox

U-Prox HW Bedienungsanleitung