Kramer K-CamHD Bedienungsanleitung
Kramer Electronics Ltd.
K-CamHD Contents
i
Contents
Introduction 1
Getting Started 1
Overview 2
Typical Applications 3
Defining K-CamHD PTZ Camera 4
Mounting K-CamHD 5
Mounting K-CamHD 5
Connecting K-CamHD 7
Connecting to K-CamHD via RS-232 8
Operating and Controlling K-CamHD 9
Controlling Via IR Remote Control Transmitter 10
Operating Via the OSD Menu 12
Upgrading Firmware 17
Technical Specifications 18
Default Communication Parameters 20
Kramer Electronics Ltd.
K-CamHD Introduction
1
Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world
of unique, creative, and affordable solutions to the vast range of problems that confront the
video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we
have redesigned and upgraded most of our line, making the best even better!
Getting Started
We recommend that you:
•Unpack the equipment carefully and save the original box and packaging materials for
possible future shipment.
•Review the contents of this user manual.
Go to www.kramerav.com/downloads/K-CamHD to check for up-to-date user manuals,
application programs, and to check if firmware upgrades are available (where appropriate).
Achieving Best Performance
•Use only good quality connection cables (we recommend Kramer high-performance,
high-resolution cables) to avoid interference, deterioration in signal quality due to poor
matching, and elevated noise levels (often associated with low quality cables).
•Do not secure the cables in tight bundles or roll the slack into tight coils.
•Avoid interference from neighboring electrical appliances that may adversely influence
signal quality.
•Position your Kramer K-CamHD away from moisture, excessive sunlight and dust.
Safety Instructions
Caution:
•This equipment is to be used only inside a building. It may only be connected to other
equipment that is installed inside a building.
•For products with relay terminals and GPI\O ports, please refer to the permitted rating
for an external connection, located next to the terminal or in the User Manual.
•There are no operator serviceable parts inside the unit.
Warning:
•Use only the power cord that is supplied with the unit.
•To ensure continuous risk protection, replace fuses only according to the rating
specified on the product label which is located on the bottom of the unit.
Kramer Electronics Ltd.
K-CamHD Introduction
2
Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce
the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected
and recycled. To comply with the WEEE Directive, Kramer Electronics has made
arrangements with the European Advanced Recycling Network (EARN) and will cover any
costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on
nts in your particular
country go to our recycling pages at www.kramerav.com/il/quality/environment.
Overview
Congratulations on purchasing your Kramer K-CamHD PTZ Camera (Pan Tilt Zoom camera).
K-CamHD provides great image quality, even in low-light conditions, and easy access to
medium and large size conferencing. K-CamHD combines 1080p image quality, 12x optical
zoom, intelligent color optimization technology, ultra-low CMOS image sensors as well as 2D
and 3D DNR technology.
Go to www.kramerav.com/downloads/K-CamHD to download the latest user manual and
check if firmware upgrades are available.
K-CamHD provides exceptional quality, advanced and user-friendly operation, and flexible
control.
•Smooth PTZ operation featuring a horizontal field of view (HFoV) of 72.5°, easy pan
(±170°) and tilt (±30°) ensuring complete coverage.
•High quality zoom 12x optical zoom and 16x digital zoom providing a crystal-clear
image and highly accurate close-ups.
•Simple plug and play connecting via USB 3.0.
•Built-in noise reduction delivers clear image quality, even in low light situations with 2D
and 3D DNR and WDR technology.
•High-end camera lens provides 1080p professional visuals.
•Flexible camera works with a host of meeting devices based on RS-232 protocol
communication.
Kramer Electronics Ltd.
K-CamHD Introduction
3
Typical Applications
K-CamHD is ideal for the following typical applications:
•Hybrid video conferencing in meeting rooms.
Controlling your K-CamHD
Control your K-CamHD via:
•RS-232 serial commands (VISCA protocol) transmitted by a touch screen system, PC, or
other serial controller.
•Remotely, from the infrared remote control transmitter.
•OSD menu.
Kramer Electronics Ltd.
K-CamHD Defining K-CamHD PTZ Camera
4
Defining K-CamHD PTZ Camera
This section defines K-CamHD.
Figure 1: K-CamHD PTZ Camera
#
Feature
Function
Camera
High quality Camera.
Tilting Mechanism
Can be set to any of 255 preset positions.
STANDBY LED
Lights green when the camera is in standby mode.
POWER LED
Lights green when the power is on.
USB 3.0 Type B Port
Connect to a PC.
LINE IN
Connect to a microphone.
RS-232 8-pin
DIN Connector
IN
Connect to a device with an RS-232 port (for example, a system
controller).
OUT
Connect to a device with an RS-232 port (for example, a camera).
12V DC Power
Connector
Connect to the 12V power adapter.
1
2
3
4
5
6
7
8
9
Kramer Electronics Ltd.
K-CamHD Mounting K-CamHD
5
Mounting K-CamHD
This section provides instructions for mounting K-CamHD. Before installing, verify that the
environment is within the recommended range:
•Operation temperature 0to 40C (32to 104F).
•Storage temperature -20to +60C (-4to +140F).
•Humidity 10% to 90%, RHL non-condensing.
Caution:
•Mount K-CamHD before connecting any cables or power.
Warning:
•Ensure that the environment (e.g., maximum ambient temperature & air flow) is
compatible for the device.
•Avoid uneven mechanical loading.
•Keep away from children product includes small accessories and components.
•Appropriate consideration of equipment nameplate ratings should be used for avoiding
overloading of the circuits.
•Reliable earthing of rack-mounted equipment should be maintained.
•Maximum mounting height for the device is 2 meters.
Mounting K-CamHD
You can mount your camera to a wall, ceiling, or place it on a surface. A built-in gravity sensor
automatically corrects the image orientation enabling mounting K-CamHD straight or upside-
down.
Note that you can also attach the device upside down, from under the bracket.
To mount K-CamHD on a wall:
1. find the correct location on the wall.
2. in the desired location, drill 4 holes 82mm
and 60mm apart (using a 6mm drill-bit) to
fit the 4 holes of the wall-mounting
bracket.
3. Insert the four expansion plugs into the
holes.
Kramer Electronics Ltd.
K-CamHD Mounting K-CamHD
6
4. Attach the wall bracket to the wall, using
the four wall-bracket screws.
You can place the bracket upside-down to
mount the camera the other way around.
5. Attach the device to the wall bracket by
fitting the mortise (on the bracket) into the
tenon (on the camera).
6. Fix the camera by screwing (A) Nickel
screw to the center and (B) then tighten
with 3 black screws.
K-CamHD is mounted on the wall.
Kramer Electronics Ltd.
K-CamHD Connecting K-CamHD
7
Connecting K-CamHD
Always switch off the power to each device before connecting it to your K-CamHD. After
connecting your K-CamHD, connect its power and then switch on the power to each device.
Figure 2: Connecting to the K-CamHD Rear Panel
To connect K-CamHD as illustrated in the example in Figure 2:
1. Connect the USB 3.0 port to a laptop.
2. Connect a microphone to the LINE IN 3.5 Mini Jack .
3. Connect the RS232 OUT 8-pin DIN Connector to an additional Camera.
4. Connect a control system to the RS232 IN 8-pin DIN Connector .
5. Connect the power adapter to K-CamHD and to the mains electricity (not shown in
Figure 2).
5
6
8
7
Kramer Electronics Ltd.
K-CamHD Connecting K-CamHD
8
Connecting to K-CamHD via RS-232
You can connect to K-CamHD via an RS-232 connection / using, for example, a PC or
an additional camera.
Connect the K-CamHD RS-232 8-pin Min DIN connector to an RS-232 9-pin D-sub serial
port, as follows:
Camera Pin
RS-232 9-Pin D-Sub Serial Pin
1 (DTR)
6 (DSR)
2 (DSR)
4 (DTR)
3 (TXD)
2 (RXD)
4 (GND)
5 (GND)
7 (RTS) shorted to 8 (CTS)
7
8
Andere Handbücher für K-CamHD
2
Inhaltsverzeichnis
Andere Kramer Sicherheitskamera Handbücher
