Kramer VM-3H2 Bedienungsanleitung

VM-3H2 Quick Start

P/N:

2900- 301131QS

Rev:

Scan for full manual

VM-3H2 Quick Start Guide

This guide helps you install and use your VM-3H2 for the first time.

Go to www.kramerav.com/downloads/VM-3H2 to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

VM-3H2 4K HDMI 2.0 1:3 DA

4 Rubber feet

1 Power supply (5V DC)

1 Quick start guide

Step 2: Mount VM-3H2

Install VM-3H2 using one of the following methods:

•Attach the rubber feet and place the unit on a flat surface.

•Fasten a bracket on each side of the unit and attach it to a flat surface

(see www.kramerav.com/downloads/VM-3H2).

•Mount the unit in a rack using the recommended rack adapter

(see www.kramerav.com/product/VM-3H2).

•Ensure that the environment (e.g., maximum ambient temperature & air flow) is compatible for the

device.

•Avoid uneven mechanical loading.

•Appropriate consideration of equipment nameplate ratings should be used for avoiding overloading of

the circuits.

•Reliable earthing of rack-mounted equipment should be maintained.

•Maximum mounting height for the device is 2 meters.

Step 3: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your VM-3H2.

To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/VM-3H2.

Using third-party cables may cause damage!

Step 4: Connect power

Connect the power cord to VM-3H2 and plug it into the mains electricity.

Safety Instructions (See www.kramerav.com for updated safety information)

Caution:

•For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the

terminal or in the User Manual.

•There are no operator serviceable parts inside the unit.

Warning:

•Use only the power cord that is supplied with the unit.

•Disconnect the power and unplug the unit from the wall before installing.

Step 5: Set DIP-switches

Set the DIP-switches according to your needs using the following table:

Programming mode

HDCP Input (MAC mode)

Force RGB

Lock Default EDID

DIP

OFF (up)

Normal mode

HDCP enabled

Force RGB

EDID not locked

ON (down)

Enable programming

HDCP disabled

Normal mode

EDID locked

Andere Handbücher für VM-3H2

Inhaltsverzeichnis

Andere Kramer Schalten Handbücher

Kramer

Kramer DIP-31 Bedienungsanleitung

Kramer

Kramer 6241HDx1 Bedienungsanleitung

Kramer

Kramer ScaleMagix 2 VP-740HC Bedienungsanleitung

Kramer

Kramer VP-41 Bedienungsanleitung

Kramer

Kramer VP-727A Bedienungsanleitung

Kramer

Kramer VS-161H Bedienungsanleitung

Kramer

Kramer VP-81K Bedienungsanleitung

Kramer

Kramer WP-5VH2 Bedienungsanleitung

Kramer

Kramer VS-66FW Bedienungsanleitung

Kramer

Kramer VP-773A Bedienungsanleitung

Kramer

Kramer VP-411DS Bedienungsanleitung

Kramer

Kramer VP-440 Bedienungsanleitung

Kramer

Kramer VP-23N Bedienungsanleitung

Kramer

Kramer VP-81 Bedienungsanleitung

Kramer

Kramer VP-427UHD Bedienungsanleitung

Kramer

Kramer VS-81H Bedienungsanleitung

Kramer

Kramer SWT3-31-HU Bedienungsanleitung

Kramer

Kramer VP-730 Bedienungsanleitung

Kramer

Kramer VP-81SIDN Bedienungsanleitung

Kramer

Kramer VW-4 Bedienungsanleitung

Kramer

Kramer VS-81ETH Bedienungsanleitung

Kramer

Kramer VS-4FW Bedienungsanleitung

Kramer

Kramer VS-81SP Bedienungsanleitung

Kramer

Kramer vs-162 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung