Kramer VS-44DT Bedienungsanleitung

KRAMER

VS-44DT HDMI/HDBT Matrix Switcher Quick Start Guide

This guide helps you install and use your VS-44DT for the first time. For more detailed information, g

http://www.kramerav.com/manual/VS-44DT to download the latest manual or scan the QR code on the left.

o to

Step 1: Check what’s in the box

1 Power cord

1 Quick Start Guide

1 Set of rack “ears”

4 Rubber feet

VS-44DT HDMI/HDBT Matrix Switcher

IR remote control transmitter with batteries

Step 2: Install the VS-44DT

To mount the VS-44DT in a rack, attach both “ear” brackets to the device using the three screws on

each side of the device. Alternatively, attach the rubber feet to the bottom of the device and place it

on a table.

Step 3: Connect the inputs and outputs

Always switch off the power to each device before connecting it to your .

For best results, always use Kramer high-performance cables to connect your AV equipment to the .

VS-44DT

P/N: Rev:

VS-44DT Quick Start (P/N: 2900-300470QS REV 1)

2 9 0 0 - 3 0 0 4 7 0 QS

WWW.KRAMERAV.COM

Step 4: Connect the power

Connect AC power to the rear of the VS-44DT, switch on its power and then switch on the

power on each device.

Sensor

Emitter

Blu-ray

Disk Player

Sensor

Blu-ray

Disk Player TP-580Rxr

TP-580Rxr

Display Computer

Controller

Active

Speakers

Remote

Control

RS-232

Controller

For optimum performance we recommend the Kramer BC-HDKat6a (CAT 6 23 AWG) cable. This specially built cable significantly

outperforms regular CAT 6/CAT 7a cables.

Command

Description

# Protocol handshaking

BUILD-DATE? Read device build date

FACTORY Reset to factory default configuration

HELP List of commands

LOCK-FP Lock the front panel

MACH-NUM Sets the machine number

MODEL? Read device model

NAME Sets the machine (DNS) name

NET-DHCP Set DHCP mode

NET-GATE Set Gateway

NET-IP Set IP address

NET-MAC? Read MAC address

NET-MASK Set subnet mask

PROT-VER? Read device protocol version

PRST-RCL Recall a saved preset list

PRST-STO Store the current connections, volumes and modes

PRST-VID? Get video connections from a saved preset

RESET Reset device

SIGNAL? Get input signal lock status

SN? Read device serial number

VERSION? Read device firmware version

VID Set video switch state

WWW.KRAMERAV.COM

Step 5: Operate the device

To Copy an EDID from an output to an input:

1. Press EDID.

2. Press the required Out button.

3. Press the required In button.

4. Press EDID.

To switch an input to an output:

1. Press a button on the top row to select an output.

2. Press a button on the bottom row to select an input to switch

to the output.

Use the Menu to configure the device:

1. Press Menu to enter the menu.

2. Navigate the menu using the Enter and arrow buttons.

3. Press Menu to exit the Menu.

You can operate the VS-44DT via any of the following methods:

Front panel buttons

Remote IR controller

Protocol 3000 commands over RS-232 or Ethernet

Built-in Web pages

VS-44DT Front Panel

IR Remote

Control

Protocol 3000 over RS-232 and Ethernet Embedded Web Pages

Enter

To Copy an EDID from an output to all inputs:

1. Press EDID.

2. Press the required Out button.

3. Press the required In button.

4. Repeat steps 2 and 3 for each EDID to copy.

5. Press EDID.

Andere Handbücher für VS-44DT

Andere Kramer Schalten Handbücher

Kramer

Kramer VS-2016 Bedienungsanleitung

Kramer

Kramer SWT3-41-H Bedienungsanleitung

Kramer

Kramer vs-162 Bedienungsanleitung

Kramer

Kramer VP-211N Bedienungsanleitung

Kramer

Kramer VS-120 Bedienungsanleitung

Kramer

Kramer Wall Plate Series Bedienungsanleitung

Kramer

Kramer FC-321 Bedienungsanleitung

Kramer

Kramer VS-4x4FW Bedienungsanleitung

Kramer

Kramer SP-14 Bedienungsanleitung

Kramer

Kramer VS-41HD Bedienungsanleitung

Kramer

Kramer VS-21 Bedienungsanleitung

Kramer

Kramer VP-690 Bedienungsanleitung

Kramer

Kramer VP-732 Bedienungsanleitung

Kramer

Kramer VP-550X Bedienungsanleitung

Kramer

Kramer VP-794 Bedienungsanleitung

Kramer

Kramer KDS-USB2 Kit Bedienungsanleitung

Kramer

Kramer MV-6 Bedienungsanleitung

Kramer

Kramer VM-42 Bedienungsanleitung

Kramer

Kramer VS-41HDCP Bedienungsanleitung

Kramer

Kramer ProScale VP-728 Bedienungsanleitung

Kramer

Kramer VS-21HDCP-IR Bedienungsanleitung

Kramer

Kramer TOOLS VP-211K Bedienungsanleitung

Kramer

Kramer VP-727A-BA Bedienungsanleitung

Kramer

Kramer VP-41 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung