Kramer VP-4x1 CS Bedienungsanleitung

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

VP-4x1CS

4x1 PC Graphics Clean

Switcher

P/N: 2900-300198 Rev 4

VP-4x1CS - Contents

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 2

2.3 Recycling Kramer Products 3

3Overview 4

4Defining the VP-4x1CS 4x1 PC Graphics Clean Switcher 5

4.1 Using the IR Transmitter 7

5Installing in a Rack 8

6Connecting the VP-4x1CS 4x1 PC Graphics Clean Switcher 9

6.1 Connecting the Remote Selector and Mute Switches 10

6.2 Connecting a Balanced/Unbalanced Stereo Audio Output 11

6.3 Connecting to the VP-4x1CS via RS-232 11

6.4 Connecting to the VP-4x1CS via Ethernet 11

6.5 Ethernet Port Configuration 13

7Operating the VP-4x1CS 4x1 PC Graphics Clean Switcher 14

7.1 Operating the VP-4x1CS Locally 14

7.2 Operating the VP-4x1CS Remotely Using the Embedded Web Pages 16

7.3 Using the K-Single Application 23

8Wiring the TP RJ-45 Ethernet Connector 24

9Technical Specifications 25

10 Default Communication Parameters 26

11 Kramer Protocol 2000 27

11.1 Protocol 2000 Hex Codes 29

12 Protocol 3000 31

12.1 Kramer Protocol 3000 Syntax 31

12.2 Kramer Protocol 3000 Commands 34

Figures

Figure 1: VP-4x1CS 4x1 PC Graphics Clean Switcher Front Panel 5

Figure 2: VP-4x1CS 4x1 PC Graphics Clean Switcher Rear Panel 6

Figure 3: Connecting the VP-4x1CS 4x1 PC Graphics Clean Switcher 9

Figure 4: Remote Selector and Output Mute Switch Connection 10

Figure 5: Balanced Stereo Audio Connection 11

Figure 6: Unbalanced Stereo Audio Connection 11

Figure 7: Local Area Connection Properties Window 12

Figure 8: Internet Protocol (TCP/IP) Properties Window 13

Figure 9: Java Test Page Success Message 17

Figure 10: The Loading Page 18

Figure 11: First Time Security Warning 18

Figure 12: VP-4x1CS Switching Matrix Page 19

Figure 13: Switching an Input to an Output 20

Figure 14: Exiting Offline Warning 21

Figure 15: Audio Gain Page 21

Figure 16: Configurations Page 22

Figure 17: TP Pinout Wiring 24

VP-4x1CS - Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:

Sierra Video Products.

Congratulations on purchasing your Kramer VP-4x1CS 4x1 PC Graphics Clean

Switcher, which is ideal for the following typical applications:

Display systems requiring simple input selection

Remote monitoring of computer activity in schools and businesses

Rental/staging applications

Multimedia and presentation source selection

VP-4x1CS - Getting Started

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

Go to http://www.kramerelectronics.com/support/product_downloads.asp

to check for up-to-date user manuals, application programs, and to check if

firmware upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

Do not secure the cables in tight bundles or roll the slack into tight coils

Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

Position your VP-4x1CS away from moisture, excessive sunlight and dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

2.2 Safety Instructions

Caution:

There are no operator serviceable parts inside the unit

Warning:

Use only the power cord that is supplied with the unit

Warning:

Do not open the unit. High voltages can cause

electrical shock! Servicing by qualified personnel only

Warning:

Disconnect the power and unplug the unit from the wall

before installing

VP-4x1CS - Getting Started

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

aims to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country

go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

VP-4x1CS - Overview

3 Overview

The VP-4x1CS is a high quality 4x1 switcher for PC graphics (up to UXGA) and

audio signals. Kramer’s Kr-isp®technology ensures high quality video.

In particular, the VP-4x1CS features:

Clean switching

Automatic switching

Kramer’s innovative integrated sync processing; Kr-isp®technology provides

a sharp, stable image by restoring the signal waveform even when the sync

level is too low

Audio-follow-video switching

Remote, contact closure input selection

Remote, contact closure output muting

A lock button to prevent unwanted tampering with the buttons on the front

panel

Independent audio level adjustment

Support for Kramer Protocol 2000 and Protocol 3000

You can control the VP-4x1CS using the front panel buttons, or remotely via:

RS-232 serial commands transmitted by a PC, touch screen system or other

serial controller

The Kramer RC-IR3 infrared remote control transmitter

A PC connected to the Ethernet port on the device via a LAN

An optional external remote IR receiver (see Section 4.1)

Remote, contact closure switches for input selection and muting

4 Defining the VP-4x1CS 4x1 PC Graphics Clean Switcher

This section defines the front and rear panels of the VP-4x1CS.

Figure 1: VP-4x1CS 4x1 PC Graphics Clean Switcher Front Panel

Feature

Function

IR Receiver and LED

Signal receiver and LED for the infrared remote control transmitter. The indicator LED

lights yellow when receiving an IR signal

ON LED

The LED lights green when the device is powered on

OFF Button

Press to mute the output

INPUT SELECTOR 1~4 Buttons

Press one of the 4 input buttons to switch it to the output

PRIORITY Button

Press to set the current active input as the priority input. Press again to cancel priority

input selection (see Section 7.1.1)

LOCK Button

Press and hold to lock the front panel buttons. Press and hold again to unlock the

buttons (see Section 7.1.3)

AUDIO LEVEL Control

Rotate clockwise to increase the audio level and anticlockwise to decrease the audio

level of the audio output

VP-4x1CS –Defining the VP-4x1CS PC Graphics Clean Switcher

Figure 2: VP-4x1CS 4x1 PC Graphics Clean Switcher Rear Panel

Feature

Function

AUDIO IN1~IN4 Unbalanced Stereo Audio 3.5mm Mini Jacks

Connect to up to 4 unbalanced, stereo audio sources

PC VIDEO IN1~IN4 UXGA 15-pin HD Connectors (F)

Connect to up to 4 PC graphics sources

PC OUT UXGA 15-pin HD Connector (F)

Connect to the PC graphics acceptor

ETHERNET RJ-45 Connector

Connect to a PC via a LAN to control the device (see Section 6.4)

RS-232 Serial Port 9-pin D-sub Connector (F)

Connect to a PC/serial controller (see Section 6.3)

REMOTE IR Opening

Connect to an external IR receiver for controlling the device using an IR

remote controller (see Section 4.1)

Mains Power Connector, Fuse and Power Switch

Plug in the power cord and switch the device on and off

AUDIO OUT Unbalanced Stereo Audio 3.5mm Mini Jack

Connect to the unbalanced, stereo audio acceptor (see Section 6.2)

AUDIO OUT Balanced Stereo Audio 5-pin Terminal Block

Connect to the balanced, stereo audio acceptor

RESET Button

Press and hold while powering on to reset the device to factory default (see

Section 4.1)

REMOTE Contact Closure Selector and Mute Switches 6-way

Terminal Block

Connect pins 1 to 4 and G to up to 4 remote, input selector, contact closure

switches. Connect the OFF and G pins to a remote mute switch (see

Section 6.1)

VP-4x1CS - Defining the VP-4x1CS 4x1 PC Graphics Clean Switcher

4.1 Using the IR Transmitter

You can use the RC-IR3 IR transmitter to control the machine via the built-in IR

receiver on the front panel or, instead, via an optional external IR receiver (for

example, P/N C-A35M/IRR-50). The external IR receiver can be located up to 15m

away from the machine. This distance can be extended to up to 60m when used

with three extension cables (for example, P/N C-A35M/A35F-50).

Before using the external IR receiver, be sure to arrange for your Kramer dealer to

insert the internal IR connection cable (for example, P/N: 505-70434010-S) with

the 3.5mm connector that fits into the REMOTE IR opening on the rear panel.

Connect the external IRreceiver to the REMOTE IR 3.5mm connector.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kramer Schalten Handbücher

Kramer

Kramer VP-732 Bedienungsanleitung

Kramer

Kramer VIA Collage Bedienungsanleitung

Kramer

Kramer ScaleMagix 2 VP-740HC Bedienungsanleitung

Kramer

Kramer WP-20CT Bedienungsanleitung

Kramer

Kramer VP-81x1 Bedienungsanleitung

Kramer

Kramer VP-720DS Bedienungsanleitung

Kramer

Kramer VS-24xl Bedienungsanleitung

Kramer

Kramer KDS-SW2-EN7 Bedienungsanleitung

Kramer

Kramer Tools VP-111 Bedienungsanleitung

Kramer

Kramer DigiTOOLS VS-41USB Bedienungsanleitung

Kramer

Kramer VP-725xl Bedienungsanleitung

Kramer

Kramer VP-201xl Bedienungsanleitung

Kramer

Kramer VP-734 Bedienungsanleitung

Kramer

Kramer TOOLS VP-211K Bedienungsanleitung

Kramer

Kramer VS-211UHD Bedienungsanleitung

Kramer

Kramer VS-21A Bedienungsanleitung

Kramer

Kramer VM-218DTxr Bedienungsanleitung

Kramer

Kramer VM-22H Bedienungsanleitung

Kramer

Kramer VIA CONNECT PRO Bedienungsanleitung

Kramer

Kramer VS-211XS Bedienungsanleitung

Kramer

Kramer VS-44DT Bedienungsanleitung

Kramer

Kramer VP-774AMP Bedienungsanleitung

Kramer

Kramer VP-28 Bedienungsanleitung

Kramer

Kramer VP-733 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung