Kramer VP-81SIDN Bedienungsanleitung

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

VP-81SIDN

8x1 Digital Step-In Switcher

P/N: 2900-300315 Rev 1

VP-81SIDN - Contents

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 2

2.3 Recycling Kramer Products 3

3Overview 4

3.1 About the Power Connect™ Feature 5

3.2 Using Twisted Pair cables 5

3.3 Using the IR Transmitter for the VP-81SIDN 5

4Defining the VP-81SIDN 8x1 Digital Step-In Switcher 6

5Installing in a Rack 9

6Connecting the VP-81SIDN 8x1 Digital Step-In Switcher 10

6.1 Connecting to a Balanced Audio Acceptor 12

6.2 Connecting Remote Contact Input and Output Selection Switches 12

6.3 Connecting to the VP-81SIDN 8x1 Digital Step-In Switcher via RS-232 14

6.4 Connecting to the VP-81SIDN via RS-485 14

6.5 Connecting to the VP-81SIDN 8x1 Digital Step-In Switcher via Ethernet 16

7Operating the VP-81SIDN Locally 20

7.1 Selecting an Input 20

7.2 Muting the Input when using Step-In Commanders 21

7.3 Resetting all Input Priorities to the Default 21

7.4 Selecting an Output 21

7.5 Setting the Audio Output Volume 21

7.6 Locking and Unlocking the Front Panel Buttons 22

7.7 Muting and unmuting the Audio 22

8Configuring and Maintaining the VP-81SIDN 23

8.1 Setting the RS-485 Device Number 23

8.2 Reading the Current RS-485 Device Number 23

8.3 Setting the RS-485 Bus Termination 24

8.4 Resetting to the Factory Default Settings 24

8.5 Upgrading the Firmware 25

9Operating the VP-81SIDN Remotely 26

9.1 Operating the VP-81SIDN Using the Controller Software 26

10 Wiring the DGKat TP RJ-45 Connectors 38

11 Technical Specifications 39

12 Default Communication Parameters 40

13 Protocol 3000 41

13.1 Kramer Protocol 3000 Syntax 41

13.2 Kramer Protocol 3000 Commands 43

Figures

Figure 1: VP-81SIDN 8x1 Digital Step-In Switcher Front Panel 6

Figure 2: VP-81SIDN 8x1 Digital Step-In Switcher Rear Panel 7

Figure 3: Connecting the VP-81SIDN 8x1 Digital Step-In Switcher 10

Figure 4: Balanced Stereo Audio Output Connection 12

VP-81SIDN - Introduction

Figure 5: Remote Input Selection Switch Wiring 13

Figure 6: RS-485 Control of Multiple VP-81SIDN Devices via RS-232 and RS-485 15

Figure 7: Local Area Connection Properties Window 17

Figure 8: Internet Protocol Version 4 Properties Window 18

Figure 9: Internet Protocol Version 6 Properties Window 18

Figure 10: Internet Protocol Properties Window 19

Figure 11: RS-485 Termination DIP-switch 24

Figure 12: Step-In Software Main Window 27

Figure 13: Typical Input Button 28

Figure 14: Login Window 30

Figure 15: Connection Method Window 31

Figure 16: Input Selection 32

Figure 17: VP-81SIDN Input Selection 32

Figure 18: Changing the Output Volume 33

Figure 19: Input Button Priorities Window 34

Figure 27: TP Pinout Wiring 38

VP-81SIDN - Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:

Sierra Video Products.

Congratulations on purchasing your Kramer VP-81SIDN 8x1 Digital Step-In

Switcher, which is ideal for the following typical applications:

Display systems requiring simple input selection

Remote monitoring of computer activity in schools and businesses

Rental/staging applications

Multimedia and presentation source selection

VP-81SIDN - Getting Started

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

Go to http://www.kramerelectronics.com/support/product_downloads.asp

to check for up-to-date user manuals, application programs, and to check

if firmware upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

Do not secure the cables in tight bundles or roll the slack into tight coils

Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

Position your VP-81SIDN away from moisture, excessive sunlight and dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

2.2 Safety Instructions

Caution:

There are no operator serviceable parts inside the unit

Warning:

Use only the power cord that is supplied with the unit

Warning:

Do not open the unit. High voltages can cause

electrical shock! Servicing by qualified personnel only

Warning:

Disconnect the power and unplug the unit from the wall

before installing

VP-81SIDN - Getting Started

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

aims to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country

go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

VP-81SIDN - Overview

3 Overview

The VP-81SIDN can route one of eight TP (Twisted Pair), a DVI or an HDMI input

to either a TP or an HDMI output. Input selection can also be controlled remotely

using;

Step-In modules (for example, the SID-DP)

Contact closure switches

A serial controller via RS-232 or RS-485

A PC via Ethernet connected over a LAN

The device also outputs balanced and unbalanced stereo audio, as well as digital

audio.

In particular, the VP-81SIDN:

Has a bandwidth of 1.65Gbps per video channel

Can be cascaded with up to four VP-81SIDN devices via the HDMI port to

provide up to 37 Twisted Pair inputs

Supports the SID range of Step-in Commander panels for remote inputs and

remote step-in control

Has a USB power port that can provide power to USB devices, (for example,

the Kramer KW-11T)

Is HDCP compliant

Provides EDID capture –Copies and stores the EDID from a display device

You can control the VP-81SIDN using the front panel buttons, or remotely via:

RS-485 or RS-232 serial commands transmitted by a touch screen system,

PC or other serial controller

Ethernet over a LAN

The Kramer RC-IR3 Infrared Remote Control Transmitter or the

CA35M/IRR-50 infrared remote extension cable transmitter (optional)

VP-81SIDN - Overview

3.1 About the Power Connect™ Feature

The Power Connect™ feature here means that digital Step-In Commanders (for

example, the SID-DP and SID-DVI) do not require an independent power supply if

the distance between the VP-81SIDN and the Step-In Commander does not

exceed 50m (164ft). The Power Connect™ feature applies as long as the cable

can carry power and the distance does not exceed 50m on standard TP cable.

(Heavier gauge cable may be used to extend the Power Connect™ range).

Note: Analog Step-In Commanders (for example, the SID-VGA and SID-X1) do

require independent power supplies.

3.2 Using Twisted Pair cables

Kramer engineers have developed special twisted pair cables to best match our

digital twisted pair products; the Kramer BC-DGKat524 (CAT 5 24 AWG), the

Kramer BC-DGKat623 (CAT 6 23 AWG), and the Kramer BC-DGKat7a23 (CAT

7a 23 AWG) cables. These specially built cables significantly outperform regular

CAT 5/CAT 6/CAT 7a cables.

Note: The VP-81SIDN cannot work with unshielded cables.

3.3 Using the IR Transmitter for the VP-81SIDN

You can use the RC-IR3 IR transmitter to operate the VP-81SIDN via the built in

IR receiver on the front panel, or instead, via an optional external IR receiver. The

external IR receiver can be located 15m (49ft) away from the device. This distance

can be extended to up to 60m (197ft) when used with three extension cables.

Before using the external IR receiver, be sure to arrange for your Kramer dealer to

insert the internal IR connection cable with the 3.5mm mini jack that fits into the

REMOTE IR opening on the rear panel. Connect the external IR receiver to the

REMOTE IR 3.5mm mini jack.

4 Defining the VP-81SIDN 8x1 Digital Step-In Switcher

Figure 1 defines the front panel of the VP-81SIDN.

Figure 1: VP-81SIDN 8x1 Digital Step-In Switcher Front Panel

Feature

Function

LED

Lights yellow when receiving an IR signal

Sensor

Receives the signal transmitted by an IR remote control

POWER LED

Lights green when the device is powered on

TP INPUT SELECT Buttons (1 to 8)

Press to select one of the TP inputs

LOCAL INPUT SELECT

Buttons

DVI

Press to select the DVI input

HDMI

Press to select the HDMI input

OUTPUT SELECT Buttons

HDMI

Press to select the HDMI output

Press to select the TP output

VOLUME CONTROL Buttons

Press to increase the analog audio output volume

–

Press to decrease the analog audio output volume

MUTE Button

Press to mute the external audio output

LOCK Button

Press and hold to lock the front panel buttons. Press and hold again to

unlock the buttons

VP-81SIDN –Defining the VP-81SIDN 8x1 Digital Step-In Switcher

Inhaltsverzeichnis

Andere Kramer Schalten Handbücher

Kramer

Kramer VS-81H Bedienungsanleitung

Kramer

Kramer VS-81SP Bedienungsanleitung

Kramer

Kramer VP-553xl Bedienungsanleitung

Kramer

Kramer VS-21HDCP-IR Bedienungsanleitung

Kramer

Kramer KIT-401 Bedienungsanleitung

Kramer

Kramer VP-311DVI Bedienungsanleitung

Kramer

Kramer VP-725DSA Bedienungsanleitung

Kramer

Kramer VP-201xl Bedienungsanleitung

Kramer

Kramer VP-733 Bedienungsanleitung

Kramer

Kramer VS-21DPIR Bedienungsanleitung

Kramer

Kramer VP-725N Bedienungsanleitung

Kramer

Kramer VP-440X Bedienungsanleitung

Kramer

Kramer VS-41HDCP Bedienungsanleitung

Kramer

Kramer VP-720DS Bedienungsanleitung

Kramer

Kramer 6241N Bedienungsanleitung

Kramer

Kramer VS-21H-IR Bedienungsanleitung

Kramer

Kramer VS-211HDx1 Bedienungsanleitung

Kramer

Kramer SWT3-41-H Bedienungsanleitung

Kramer

Kramer VS-21HDCP Bedienungsanleitung

Kramer

Kramer VS-41H2 Bedienungsanleitung

Kramer

Kramer WP-20CT Bedienungsanleitung

Kramer

Kramer DIP-31M Bedienungsanleitung

Kramer

Kramer VP-427UHD Bedienungsanleitung

Kramer

Kramer VM-10FW Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung