Kramer VS-21HDCP-IR Bedienungsanleitung

Kramer Electronics, Ltd.

USER MANUAL

Model:

VS-21HDCP-IR

2x1 DVI Switcher

Contents

1Introduction 1

2Getting Started 1

2.1 Quick Start 1

3Overview 3

3.1 About HDCP 3

3.2 Defining EDID 3

3.3 Recommendations for Best Performance 4

4Your VS-21HDCP-IR 2x1 DVI Switcher 4

5Connecting a VS-21HDCP-IR 2x1 DVI Switcher 5

5.1 Controlling the VS-21HDCP-IR via RS-232 6

5.2 Using the Remote Control Transmitter 7

5.3 Controlling via the REMOTE Terminal Block Connector 7

6Acquiring EDID 8

7Technical Specifications 8

8Default Communication Parameters 9

9Kramer Protocol 9

9.1 Toggling Between Protocols 9

9.2 Kramer Protocol 2000 10

9.3 Protocol 3000 Syntax 11

9.3.1 Host Message Format 11

9.3.1.1 Simple Command 11

9.3.1.2 Command String 11

9.3.2 Device Message Format 11

9.3.2.1 Device Long Response 12

9.3.3 Command Terms 12

9.3.4 Entering Commands 13

9.3.5 Command Forms 13

9.3.6 Command Chaining 13

9.3.7 Maximum String Length 13

9.3.8 Backward Support 13

9.4 Commands 13

9.4.1 Help Commands 13

9.4.2 Common Commands 13

9.4.3 Basic Routing Commands 14

9.1 Result and Error Codes 14

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Contents

Figures

Figure 1: VS-21HDCP-IR 2x1 DVI Switcher 4

Figure 2: Connecting a VS-21HDCP-IR 2x1 DVI Switcher 6

Figure 3: Connecting the REMOTE Input Select Connector 7

Tables

Table 1: VS-21HDCP-IR 2x1 DVI Switcher Features 5

Table 2: Technical Specifications of the VS-21HDCP-IR 2x1 DVI Switcher 8

Table 3: Default Communication Parameters 9

Table 4: Protocol Definitions 10

Table 5: Instruction Codes for Protocol 2000 11

Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range

of problems that confront the video, audio, presentation, and broadcasting

professional on a daily basis. In recent years, we have redesigned and upgraded

most of our line, making the best even better! Our 1,000-plus different models

now appear in 11 groups1

Congratulations on purchasing your Kramer MultiTOOLS® VS-21HDCP-IR

2x1 DVI Switcher, which is ideal for presentation graphics selection and

routing.

that are clearly defined by function.

Each package includes the following items:

•VS-21HDCP-IR 2x1 DVI Switcher

•Power adapter (5V DC)

•Kramer RC-IR3Infrared Remote Control Transmitter (including the

required battery and a separate user manual2

•This user manual

)

•Bracket installation kit

2 Getting Started

We recommend that you:

•Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

•Review the contents of this user manual

•Use Kramer high performance high resolution cables3

2.1 Quick Start

This quick start chart summarizes the basic setup and operation steps.

1 GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix Switchers; GROUP 3: Control Systems; GROUP 4:

Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories

and Rack Adapters; GROUP 11: Sierra Products

2 Download up-to-date Kramer user manuals from our Web site at http://www.kramerelectronics.com

3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Getting Started

Overview

3 Overview

The high quality Kramer VS-21HDCP-IR is an HDCP (High-Bandwidth

Digital Content Protection)1compatible 2x1 DVI Switcher that accepts two

DVI inputs—letting you select either DVI2

The VS-21HDCP-IR:

input using a pushbutton located

on the front panel—and routes the selected DVI input signal to the DVI output.

•Passes EDID/HDCP signals from source to display

The VS-21HDCP-IR lets you read and store, in non-volatile memory, the

EDID3

•Is 5V DC fed

block from one or both outputs, so it can then provide the EDID

information to the DVI source even if the display device is not connected.

•Can be controlled remotely via RS-232, the contact closure REMOTE

input select terminal block connector or the infrared remote control

transmitter

3.1 About HDCP

The High-Bandwidth Digital Content Protection (HDCP) standard4

3.2 Defining EDID

protects

digital video and audio signals transmitted over DVI or HDMI connections

between two HDCP-enabled devices to eliminate the reproduction of

copyrighted material. To protect copyright holders (such as movie studios)

from having their programs copied and shared, the HDCP standard provides

for the secure and encrypted transmission of digital signals.

The Extended Display Identification Data (EDID5

) is a data-structure,

provided by a display, to describe its capabilities to the source. The EDID

enables the VS-21HDCP-IR to “know” what kind of monitor is connected to

the output. The EDID includes the manufacturer’s name, the product type, the

timing data supported by the display, the display size, luminance data and (for

digital displays only) the pixel mapping data.

1 Note that Kramer Electronics Limited is an HDCP Licensee

2 DVI-D (Digital). Note that only the digital signal (DVI-D) is available on the DVI connector

3 EDID is Extended Display Identification Data

4 Developed by Intel

5 Defined by a standard published by the Video Electronics Standards Association (VESA)

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Your VS-21HDCP-IR 2x1 DVI Switcher

3.3 Recommendations for Best Performance

Achieving the best performance means:

•Connecting only good quality connection cables, thus avoiding

interference, deterioration in signal quality due to poor matching, and

elevated noise levels (often associated with low quality cables)

•Avoiding interference from neighboring electrical appliances and positioning

your VS-21HDCP-IR away from moisture, excessive sunlight and dust

4 Your VS-21HDCP-IR 2x1 DVI Switcher

Figure 1and Table 1define the VS-21HDCP-IR:

Figure 1: VS-21HDCP-IR 2x1 DVI Switcher

Connecting a VS-21HDCP-IR 2x1 DVI Switcher

Table 1: VS-21HDCP-IR 2x1 DVI Switcher Features

Feature

Function

1 INPUT 1 DVI Connector Connect to the DVI source 1

2 INPUT 2 DVI Connector Connect to the DVI source 2

3 OUTPUT DVI Connector Connect to the DVI acceptor

4 RS-232 9-pin D-sub Connector Connects to the PC or Serial Controller

REMOTE Terminal Block Connectors Connect to a contact closure switch (see Section 5.3

)

5V DC +5V DC connector for powering the unit

7 REMOTE IR Receiver Window Receives signals from the infrared remote control transmitter

LED (yellow)The yellow LED lights when receiving signals from the

infrared remote control transmitter

8 ON LED (Green) Lights when receiving power

9 IN 1 LED (Green)Lights when input 1 is selected

10 IN 2 LED (Green) Lights when input 2 is selected

11 OUT LED (Green) Lights when the output is connected

12 SELECT Switch Press to toggle between selecting input 1 and input 2

5 Connecting a VS-21HDCP-IR 2x1 DVI Switcher

To connect the VS-21HDCP-IR 2x1 DVI Switcher, as illustrated in the

example in Figure 2, do the following2

1. Connect up to two DVI sources to the INPUT connectors, as follows:

INPUT 1 connector to DVI source 1 (for example, a computer)

INPUT 2 connector to DVI source 2 (for example, a set top box)

2. Connect the OUTPUT connector to the DVI acceptor (for example, a

DVI display).

3. Connect the 5V DC power adapter to the power socket and connect the

adapter to the mains electricity (not illustrated in Figure 2).

4. If required, connect a PC or controller to the RS-232 port (see Section

5.1

5. Press the SELECT button

1 No Null-modem adapter/Connector is required

to choose which DVI input to route to the

output.

The SELECT button toggles between INPUT 1 and INPUT 2, lighting

the IN 1 LED when INPUT 1 is selected, or the IN 2 LED when IN 2 is

selected.

2 Switch OFF the power on each device before connecting it to your VS-21HDCP-IR. After connecting your

VS-21HDCP-IR, switch on its power and then switch on the power on each device

3 Alternatively you can press key 1 or 2 on the remote transmitter, once setup (see Section 5.2), or use the contact closure

remote control pins (see Section 5.3) or use RS-232

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Connecting a VS-21HDCP-IR 2x1 DVI Switcher

Figure 2: Connecting a VS-21HDCP-IR 2x1 DVI Switcher

5.1 Controlling the VS-21HDCP-IR via RS-232

You can connect to the VS-21HDCP-IR via an RS-232 connection using, for

example, a PC. Note that a null-modem adapter/connection is not required.

To connect to the VS-21HDCP-IR via RS-232:

Connect the RS-232 9-pin D-sub rear panel port on the VS-21HDCP-IR unit

via a 9-wire straight cable (only pin 2 to pin 2, pin 3 to pin 3, and pin 5 to pin

5 need to be connected) to the RS-232 9-pin D-sub port on your PC.

Connecting a VS-21HDCP-IR 2x1 DVI Switcher

5.2 Using the Remote Control Transmitter

You can use the remote control transmitter1

To assign the GROUP number on the remote control transmitter, do the

following:

to switch INPUT 1 or 2 to the

output. Before doing so, set it to work with the VS-21HDCP-IR by assigning

a GROUP number.

1. Point the remote control transmitter at the remote receiver and press the

GROUP key.

2. Press key 11.

This sets and saves the group number.

To switch INPUT 1 or 2 to the output via the remote control transmitter, press

key 1 or 2.

5.3 Controlling via the REMOTE Terminal Block Connector

The contact closure remote control pins operate in a similar way to the input

SELECT button. Using the contact closure remote control lets you select an

input by remote control. To do so, temporarily connect the required input

(IN1 or IN2) pin on the REMOTE terminal block connector to the G (ground)

pin, as illustrated in the examples in Figure 3.

DO NOT connect more than one PIN to the G PIN at the same time

To select IN1, attach PIN IN1 to the G PIN:

To select IN2, attach PIN IN2 to the G PIN

Figure 3: Connecting the REMOTE Input Select Connector

1 The setup parameters for the remote control transmitter are as follows: router number = 1 (default); group number = 11,

single digit mode (default), video (default). For further details, see the RC-IR3 user manual

Andere Handbücher für VS-21HDCP-IR

Inhaltsverzeichnis

Andere Kramer Schalten Handbücher

Kramer

Kramer VP-8x8 Bedienungsanleitung

Kramer

Kramer VP-81K Bedienungsanleitung

Kramer

Kramer Wall Plate Series Bedienungsanleitung

Kramer

Kramer ProScale VP-728 Bedienungsanleitung

Kramer

Kramer VP-440H2 Bedienungsanleitung

Kramer

Kramer VP-732 Bedienungsanleitung

Kramer

Kramer VS-211H2 Bedienungsanleitung

Kramer

Kramer VP-444 Bedienungsanleitung

Kramer

Kramer DIP-31M Bedienungsanleitung

Kramer

Kramer VP-720DS Bedienungsanleitung

Kramer

Kramer VP-550X Bedienungsanleitung

Kramer

Kramer DigiTOOLS VS-41USB Bedienungsanleitung

Kramer

Kramer vs-162 Bedienungsanleitung

Kramer

Kramer RC-11TB Bedienungsanleitung

Kramer

Kramer VS-211H Bedienungsanleitung

Kramer

Kramer 6502 Bedienungsanleitung

Kramer

Kramer VM-218DTxr Bedienungsanleitung

Kramer

Kramer VS-21HDCP-IR Bedienungsanleitung

Kramer

Kramer WP-5VH2 Bedienungsanleitung

Kramer

Kramer VP-1201 Bedienungsanleitung

Kramer

Kramer VP-725N Bedienungsanleitung

Kramer

Kramer VP-438 Bedienungsanleitung

Kramer

Kramer VS-21B Bedienungsanleitung

Kramer

Kramer VP-81SIDN Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch