Kramer DIP-20 Bedienungsanleitung

DIP-20 Quick Start

P/N:

2900- 301071QS

Rev:

Scan for full manual

DIP-20 Quick Start Guide

This guide helps you install and use your DIP-20 for the first time.

Go to www.kramerav.com/downloads/DIP-20 to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

DIP-20 Automatic Video Switcher

1 Bracket set

4 Rubber feet

1 Power adapter (48V)

1 Quick start guide

Step 2: Mount DIP-20

Install DIP-20 using one of the following methods:

•Attach the rubber feet and place the unit on a flat surface.

•Fasten a bracket (included) on each side of the unit and attach it to a flat surface

(see www.kramerav.com/downloads/DIP-20).

•Mount the unit in a rack using the recommended rack adapter

(see www.kramerav.com/product/DIP-20).

•Ensure that the environment (e.g., maximum ambient temperature &

air flow) is compatible for the device.

•Avoid uneven mechanical loading.

•Appropriate consideration of equipment nameplate ratings should be

used for avoiding overloading of the circuits.

•Reliable earthing of rack-mounted equipment should be maintained.

•Maximum mounting height for the device is 2 meters.

Step 3: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your DIP-20. For best results, we recommend that you

always use Kramer high-performance cables to connect AV equipment to the DIP-20.

Step 4: Set DIP-switches

Video Switching Selection

DIP-switch 1 DIP-switch 2 Video Input Selection

DIP-switch 1

DIP-switch 2

Video Input Selection

Off (up)

Automatic—Last connected. Where more than one source is

connected the last one connected has priority

Off (up)

On (down)

Automatic—Priority selection.

HDMI 1 →HDMI 2 →PC IN (default, high to low priority)

On (down)

Off (up)

Manual

On (down)

Manual

Audio Switching Selection

DIP-switch 3

DIP-switch 4

Audio Input Selection

Off (up)

Automatic—Priority selection.

Embedded HDMI™→analog Audio In (high to low priority)

Off (up)

On (down)

Automatic—Priority selection.

Analog Audio In →embedded HDMI (high to low priority)

On (down)

Off (up)

Embedded HDMI

On (down)

Analog Audio In

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Step 5: Connect power

Connect the power cord to DIP-20 and plug it into the mains electricity.

Safety Instructions (See www.kramerav.com for updated safety information)

Caution:

•For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User Manual.

•There are no operator serviceable parts inside the unit.

Warning:

•Use only the power cord that is supplied with the unit.

•Disconnect the power and unplug the unit from the wall before installing.

Step 6: Operate DIP-20

Default IP Parameters

Parameter

Values

Default

Device Name

Any alphanumeric string up to 14 chars (can include hyphen, but not at the beginning or end)

KRAMER_

DHCP

ON/OFF

OFF

IP Address

Any valid IP address

192.168.1.39

Mask

Any valid network mask

255.255.0.0

Gateway

Any valid gateway address

192.168.0.1

TCP Port

0 to 65535

5000

UDP Port

0 to 65535

50000

Default RS-232 Communication Parameters

Parameter

Values

Baud Rate

115200

Data Bits

Stop Bits

Parity

None

Command Format

ASCII

Default Web Pages Logon Authentication

Parameter

Values

Name

Admin

Password

Admin

You can operate the DIP-20 via the front panel buttons, remote P3000 commands, or by using a Web browser to access the

built in Web pages.

Andere Handbücher für DIP-20

Inhaltsverzeichnis

Andere Kramer Sender Handbücher

Kramer

Kramer TP-112HD Bedienungsanleitung

Kramer

Kramer 650T Bedienungsanleitung

Kramer

Kramer TP-121EDID Bedienungsanleitung

Kramer

Kramer WP-871xr Bedienungsanleitung

Kramer

Kramer WP-121 Bedienungsanleitung

Kramer

Kramer SID-X3N Bedienungsanleitung

Kramer

Kramer EXT3-C-WP-XR-T Bedienungsanleitung

Kramer

Kramer PT-2UT/R-KIT Bedienungsanleitung

Kramer

Kramer TA Bedienungsanleitung

Kramer

Kramer 610R Bedienungsanleitung

Kramer

Kramer TP-210 Bedienungsanleitung

Kramer

Kramer TP-121EDID Bedienungsanleitung

Kramer

Kramer VP-428H2 Bedienungsanleitung

Kramer

Kramer TP-551N Bedienungsanleitung

Kramer

Kramer SID-X1N Bedienungsanleitung

Kramer

Kramer TP-205A Bedienungsanleitung

Kramer

Kramer F-121 Bedienungsanleitung

Kramer

Kramer PT-572HDCP+ Bedienungsanleitung

Kramer

Kramer TP-145 Bedienungsanleitung

Kramer

Kramer TP-112HD Bedienungsanleitung

Kramer

Kramer TP-102HD Bedienungsanleitung

Kramer

Kramer TP-590Txr Bedienungsanleitung

Kramer

Kramer WP-580Txr Bedienungsanleitung

Kramer

Kramer 691 Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung