Kramer TOOLS TP-104 Bedienungsanleitung

Kramer Electronics, Ltd.

Preliminary

USER MANUAL

Models:

TP-104, TP-104HD, XGA Line Transmitter/DA

TP-105, TP-105(HD), CAT 5 Line Driver/DA

TP-121, XGA/Audio Line Transmitter

TP-122, XGA/Audio Line Receiver

TP-123, XGA/Audio/Data Line Transmitter

TP-124, XGA/Audio/Data Line Receiver

Contents

1Introduction 1

2Getting Started 1

2.1 Quick Start 2

3Overview 4

3.1 Shielded Twisted Pair (STP)/Unshielded Twisted Pair (UTP) 4

3.2 About the Power Connect Feature 5

3.3 Recommendations for Achieving the Best Performance 5

4Your TP-104/TP-104HD XGA Line Transmitter/DA 6

5Your TP-105/TP-105(HD) CAT 5 Line Driver/DA 8

6Your TP-121/TP-122 9

6.1 Your TP-121 XGA/Audio Line Transmitter 9

6.1.1 The TP-121 Internal Polarity Switches 10

6.2 Your TP-122 XGA/Audio Line Receiver 10

6.2.1 Your TP-122 XGA/Audio Line Receiver (Topside) 10

6.2.2 Your TP-122 XGA/Audio Line Receiver (Underside) 12

7Your TP-123/TP-124 13

7.1 Your TP-123 XGA/Audio/Data Line Transmitter 13

7.1.1 The TP-123 Internal Polarity Switches 14

7.2 Your TP-124 XGA/Audio/Data Line Receiver 15

7.2.1 Your TP-124 XGA/Audio/Data Line Receiver (Underside) 16

8Connecting the XGA/Audio Line Transmitter/Receiver 17

8.1 Wiring the CAT 5 LINE IN/LINE OUT RJ-45 Connectors 19

9Connecting the XGA/Audio/Data Line Transmitter/Receiver 19

9.1 Controlling via RS-232 (for example, using a PC) 22

10 Configuring a 1:4 XGA to TP Transmitter/Receiver/DA 23

11 Configuring a TP-105 CAT 5 Line Driver/DA 25

12 Technical Specifications 27

Figures

Figure 1: TP-104 XGA Line Transmitter/DA 6

Figure 2: TP-104HD XGA Line Transmitter/DA 6

Figure 3: TP-104 (Underside Panel) 7

Figure 4: TP-105 CAT 5 Line Driver/DA 8

Figure 5: TP-121 XGA/Audio Line Transmitter 9

Figure 6: TP-121 Internal Polarity Switches 10

Figure 7: TP-122 XGA/Audio Line Receiver (Topside) 11

Figure 8: TP-122 XGA/Audio Line Receiver (Underside) 12

Figure 9: TP-123 XGA/Audio/Data Line Transmitter 13

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Contents

Figure 10: TP-123 Internal Polarity Switches 14

Figure 11: TP-124 XGA/Audio/Data Line Receiver (Topside) 15

Figure 12: TP-124 XGA/Audio/Data Line Receiver (Underside) 16

Figure 13: Connecting the XGA/Audio Line Transmitter/Receiver System 18

Figure 14: CAT 5 PINOUT 19

Figure 15: Connecting the XGA/Audio/Data Line Transmitter/Receiver System 21

Figure 16: RS-232 PINOUT Connection 22

Figure 17: Configuring a 1:4 XGA to Twisted Pair Transmitter/Receiver/DA 24

Figure 18: Configuring a TP-105 CAT 5 Line Driver/DA 26

Tables

Table 1: TP-104, TP-104HD XGA Line Transmitter/DA Features 7

Table 2: TP-104 (Underside Panel) Features 7

Table 3: TP-105 CAT 5 Line Driver/DA Features 8

Table 4: TP-121 XGA/Audio Line Transmitter Features 9

Table 5: Features of the TP-121 Internal Polarity Switches 10

Table 6: TP-122 XGA/Audio Line Receiver (Topside) Features 11

Table 7: TP-122 XGA/Audio Line Receiver (Underside) Features 12

Table 8: TP-123 XGA/Audio/Data Line Transmitter Features 14

Table 9: Features of the TP-123 Internal Polarity Switches 14

Table 10: TP-124 XGA/Audio/Data Line Receiver (Topside) Features 16

Table 11: TP-124 XGA/Audio/Data Line Receiver (Underside) Features 16

Table 12: CAT 5 PINOUT 19

Table 13: RS-232 PINOUT Connection 22

Table 14: Technical Specifications of the TP-104 and the TP-104HD 27

Table 15: Technical Specifications of the TP-105 and the TP-105(HD) 27

Table 16: Technical Specifications of the TP-121/TP-122/TP-123/TP-124 28

Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has

been providing a world of unique, creative, and affordable solutions to

the vast range of problems that confront the video, audio, presentation,

and broadcasting professional on a daily basis. In recent years, we have

redesigned and upgraded most of our line, making the best even better!

Our 1,000-plus different models now appear in 11 groups1

Thank you for purchasing your Kramer TOOLS: TP-104, TP-104HD XGA

Line Transmitter/DA, and/or TP-105, TP-105(HD), CAT 5 Line Driver/DA,

and/or TP-121 XGA/Audio Line Transmitter, and/or TP-122 XGA/Audio

Line Receiver, and/or TP-123, XGA/Audio/Data Line Transmitter, and/or

TP-124,XGA/Audio/Data Line Receiver, which are ideal for:

that are

clearly defined by function.

•Presentation and multimedia applications

•Long range graphics distribution for schools, hospitals, security,

and stores

The package includes one or more of the following Kramer TOOLS:

•TP-104/TP-104HD,TP-105/TP-105(HD), TP-121, TP-122,

TP-123, or TP-124

•Power adapter (12V DC)

•This user manual2

2 Getting Started

We recommend that you:

•Unpack the equipment carefully and save the original box and

packaging materials for possible future shipment

•Review the contents of this user manual

•Use Kramer high-performance high-resolution cables3

1 GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix Switchers; GROUP 3: Control Systems; GROUP 4:

Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories

and Rack Adapters; GROUP 11: Sierra Products

2 Download up-to-date Kramer user manuals at http://www.kramerelectronics.com

3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Getting Started

2.1 Quick Start

This quick start chart summarizes the basic setup and operation steps.

Getting Started

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Overview

3 Overview

This user manual describes the following Kramer TOOLS:

•TP-104/TP-104HD XGA Line Transmitter/DA is a line

transmitter/1:4 DA that receives an XGA signal and transmits it

over four CAT 5 cables to appropriate receivers (see section 4)

•TP-105/TP-105(HD) CAT 5 Line Driver/DA receives a CAT 5

input15and distributes it to two identical outputs (see section )

•TP-121 XGA/Audio Line Transmitter and the TP-122 XGA/Audio

Line Receiver (see section 6)

•TP-123 XGA/Audio/Data Line Transmitter and the TP-124

XGA/Audio/Data Line Receiver (see section 7)

This section describes:

•Using shielded twisted pair (STP)/unshielded twisted pair (UTP),

see section 3.1

•The power connect feature, see section 3.2

•Recommendations for achieving the best performance, see section

3.3

3.1 Shielded Twisted Pair (STP)/Unshielded Twisted Pair (UTP)

We recommend that you use Shielded Twisted Pair (STP) cable. There are

different levels of STP cable available, and we advise you to use the best

quality STP cable that you can afford. Our non-skew-free cable, Kramer

BC-STP is intended for analog signals where skewing is not an issue. For

cases where there is skewing, our UTP skew-free cable, Kramer BC-XTP,

may be used. Bear in mind, though, that we advise using STP cables where

possible, since the compliance to electromagnetic interference was tested

using those cables.

Although Unshielded Twisted Pair (UTP) cable might be preferred for long

range applications, the UTP cable should be installed far away from electric

cables, motors and so on, which are prone to create electrical interference.

However, since the use of UTP cable might cause inconformity to

electromagnetic standards, Kramer does not commit to meeting the standard

with UTP cable.

1 Video only

Overview

3.2 About the Power Connect Feature

The Power Connect feature applies as long as the cable can carry power.

This feature is available when using STP cable and the distance does not

exceed 50m on standard CAT 5 cable. For longer distances, heavy gauge

cable should be used1

For a CAT 5 cable exceeding a distance of 50m, separate power supplies

should be connected to the transmitter and to the receiver simultaneously.

.For units which are connected via RJ-45 connectors,

make sure that the shield of the STP cable is connected to the metal casing

of the connectors on both ends of the cable. For units which are connected

via terminal block connectors, the shield of the STP cable must be

connected to a ground terminal on the units at both ends (use the ground

terminal of the power supply connection if necessary).

3.3 Recommendations for Achieving the Best Performance

To achieve the best performance:

•Use only good quality connection cables2

•Avoid interference from neighboring electrical appliances that may

adversely influence signal quality and position your Kramer

product away from moisture, excessive sunlight and dust

to avoid interference,

deterioration in signal quality due to poor matching, and elevated

noise levels (often associated with low quality cables).

1 CAT 5 cable is still suitable for the video/audio transmission, but not for feeding the power at these distances

2 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Your TP-104/TP-104HD XGA Line Transmitter/DA

4 Your TP-104/TP-104HD XGA Line Transmitter/DA

The TP-104/TP-104HD1is a line transmitter/1:4 DA that receives an XGA

signal2

In particular, the TP-104/TP-104HD:

and transmits it over four CAT 5 cables to appropriate receivers.

•Has a transmission range of more than 300ft (more than 100m)

•Can power or be powered by the receiver over the same CAT 5

cable and is 12V DC fed

Figure 1 defines the TP-104 and Figure 2 defines the TP-104HD:

Figure 1: TP-104 XGA Line Transmitter/DA

Figure 2: TP-104HD XGA Line Transmitter/DA

1 The TP-104HD is similar to the TP-104 but can also receive HD signals (high definition resolutions: 480p, 576p, 720p,

1080i and 1080p)

2 The terminology XGA is used throughout this manual, where this implies any RGBHV signal on a 15-pin HD (F)

connector having a resolution from VGA up to XGA

Your TP-104/TP-104HD XGA Line Transmitter/DA

Table 1: TP-104, TP-104HD XGA Line Transmitter/DA Features

Feature

Function

1 12V DC +12V DC connector for powering the unit

2 OUT 4 RJ-45 connector Connects to1the LINE IN RJ-45 connector on the TP-122 XGA/Audio Line

Receiver or the TP-120 XGA Line Receiver2

OUT 3 RJ-45 connector Connects to1the LINE IN RJ-45 connector on the TP-122 XGA/Audio Line

Receiver or the TP-120 XGA Line Receiver2

4 OUT 2 RJ-45 connector Connects to1the LINE IN RJ-45 connector on the TP-122 XGA/Audio Line

Receiver or the TP-120 XGA Line Receiver2

5 OUT 1 RJ-45 connector Connects to1the LINE IN RJ-45 connector on the TP-122 XGA/Audio Line

Receiver or the TP-120 XGA Line Receiver2

6 INPUT 15-pin HD (F) connector Connect to the XGA source

7 ON LED Illuminates when receiving power

Figure 3 and Table 2 define the TP-104 and TP-104HD underside panel:

Figure 3: TP-104 (Underside Panel)

Table 2: TP-104 (Underside Panel) Features

Feature

Function

1 VS Switch Slide the switch up (to NORMAL) to retain the polarity

Slide the switch down3to change the VS polarity to NEGATIVE polarity4

HS Switch Slide the switch up (to NORMAL) to retain the polarity

Slide the switch down3to change the HS polarity to NEGATIVE polarity4

1 Using a UTP CAT 5 cable with RJ-45 connectors at both ends (the PINOUT is defined in Table 12 and Figure 14)

2 Refer to the separate user manual: PT-110, WP-110, PT-120, TP-120, which can be downloaded at

http://www.kramerelectronics.com. Also, see the example illustrated in Figure 17

3 By default, both switches are set to NORMAL

4 Downward syncs

Andere Handbücher für TOOLS TP-104

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kramer Sender Handbücher

Kramer

Kramer WP-871xr Bedienungsanleitung

Kramer

Kramer Cobra TS2 Bedienungsanleitung

Kramer

Kramer SID-X1N Bedienungsanleitung

Kramer

Kramer TP-410 Bedienungsanleitung

Kramer

Kramer WP-20 Bedienungsanleitung

Kramer

Kramer PT-571 Bedienungsanleitung

Kramer

Kramer TOOLS TP-104 Bedienungsanleitung

Kramer

Kramer WP-110 Bedienungsanleitung

Kramer

Kramer PT-571HDCP Bedienungsanleitung

Kramer

Kramer TP-45EDID Bedienungsanleitung

Kramer

Kramer PT-2UT/R-KIT Bedienungsanleitung

Kramer

Kramer TP-112HD Bedienungsanleitung

Kramer

Kramer TP-752T Bedienungsanleitung

Kramer

Kramer DIP-20 Bedienungsanleitung

Kramer

Kramer 610T Bedienungsanleitung

Kramer

Kramer SID-X3N Bedienungsanleitung

Kramer

Kramer TP-210 Bedienungsanleitung

Kramer

Kramer WP-789T Bedienungsanleitung

Kramer

Kramer TP-15 Bedienungsanleitung

Kramer

Kramer SID-X2N Installations- und Betriebshandbuch

Kramer

Kramer 614T Bedienungsanleitung

Kramer

Kramer KW-14T Bedienungsanleitung

Kramer

Kramer TP-580TD Bedienungsanleitung

Kramer

Kramer 617T Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung