Kramer TWA Bedienungsanleitung

Kramer Electronics, Ltd.

USER MANUAL







Model:

Cobra TWA

Contents

Introduction 1

Getting Started 1

Overview 1

Setup and Installation 3

4.1

Connections on the Cobra TWA 4

4.2

Installing the Cobra TWA 4

4.3

Powering the Cobra TWA 4

Solutions to Common Problems 5

Technical Specifications 8

Figures

Figure 1: Connecting the Cobra TWA Transmitter 4

Tables

Table 1: HD15 Video Connector PINOUT 6

Table 2: T568B CAT5 PINOUT 7

Table 3: Technical Specifications of the Cobra TWA 8

Introduction

1 Introduction

Welcome to Kramer Electronics (since 1981): a world of unique, creative and

affordable solutions to the infinite range of problems that confront the video,

audio and presentation professional on a daily basis. In recent years, we have

redesigned and upgraded most of our line, making the best even better! Our

500-plus different models now appear in 8 Groups

, which are clearly defined

by function.

Congratulations on purchasing your Kramer Cobra TWA. The Kramer Cobra

Series System extends VGA and audio signals over ordinary Category 5

cable. For information on the respective receiver units, refer to the

appropriate manual included with the receiver.

The package includes the Cobra TWA and this user manual

The Kramer Cobra series products are not compatible with Kramer non-Cobra

series products.

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

Use Kramer high performance high resolution cables

. You may

also need CAT5 cable

3 Overview

Our Kramer Cobra series products are compatible with Cat5/5e/6 data

cabling as well as skew free CAT5/5e cabling manufactured for video

applications. Note that some skew free Cat5 is specific to a particular vendor

and is not compatible with our products. Ensure any skew free CAT5 cable is

non-proprietary prior to purchase / installation.

1 GROUP 1: Distribution Amplifiers; GROUP 2: Video and Audio Switchers, Matrix Switchers and Controllers; GROUP 3:

Video, Audio, VGA/XGA Processors; GROUP 4: Interfaces and Sync Processors; GROUP 5: Twisted Pair Interfaces;

GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors

2 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com

3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Overview

We recommend using our Kramer Cobra ultra low skew cable—BC-HDTP

(solid bulk) or BCP-HDTP (solid plenum bulk)—available in lengths of 700'

(210m) and 1300' (390m).

CAT6 cable, due to the manufacture method, can exhibit much greater skew

than standard CAT5/5e and may require skew compensation beyond what the

standard product offers. Contact Kramer Electronics for assistance.

CAT5/5e/6 cabling for this product must be pinned to the TIA-EIA T568B

wiring specification (see appendix A). We also highly recommend that all

CAT5 cables be pre-terminated and tested. Cables terminated on-site or in an

existing infrastructure should be tested before use to ensure compliance with

the TIA-EIA T568B specification. Using incorrectly terminated CAT5 cables

can damage this product.

Achieving the best performance means:

Connecting only good quality connection cables, thus avoiding

interference, deterioration in signal quality due to poor matching, and

elevated noise levels (often associated with low quality cables)

Avoiding interference from neighboring electrical appliances that may

adversely influence signal quality and positioning your Cobra TWA in a

location free from moisture and away from excessive sunlight and dust

Caution – No operator-serviceable parts inside unit.

Warning – Use only the Kramer Electronics input power

wall adapter that is provided with this unit

Warning – Disconnect power and unplug unit from wall

before installing or removing device or servicing unit.

Warning –This equipment is not intended for, nor does it

support, distribution through an Ethernet network. Do not

connect these devices to any sort of networking or

telecommunications equipment!

1 For example: model number AD2512C, part number 2535-000251

Setup and Installation

4 Setup and Installation

The section describes how to setup and install the Cobra TWA. In general, the

connection and setup procedure at both transmitter and receiver ends is as

follows:

At the transmitter end:

1. Connect the source video to the Cobra Series transmitter video input port,

which is an HD15 connector labeled VIDEO. Adapter cables may be

necessary if using component, s-video, or composite signals.

2. Make your audio connections via the 1/8” (3.5 mm) AUDIO connector.

3. Connect the CAT5 cable to the rear of the transmitter.

4. Apply power on the transmitter. The LED should light.

5. When the transmitter has been tested and is functioning normally,

complete installation into a US style wall box or low voltage J-Box.

At the receiver end (refer to the receiver user guide):

1. Connect the VIDEO OUTPUT HD15 connector to the display unit.

2. Connect a 1/8” (3.5 mm) audio cable to the AUDIO OUTPUT connection.

3. Connect the CAT5 cable to the UTP connection.

4. Apply power. The LED should light and video should appear on the display

(make sure display is powered ON).

5. To adjust video levels see the appropriate section in receiver user manual.

With regard to connecting the cables:

We recommend mounting and connecting all cabling to the Cobra TWA

components before applying power.

Be sure that the CAT5 cable you intend to use has been tested to comply

with the T568B wiring specification (see Appendix A).

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Setup and Installation

4.1 Connections on the Cobra TWA

The Cobra TWA transmitter supports video and audio signals over CAT5

cable. The audio signal is line-level R/L summed and powered speakers are

required. Figure 1 shows the Cobra TWA transmitter connections.

Figure 1: Connecting the Cobra TWA Transmitter

4.2 Installing the Cobra TWA

The Cobra TWA transmitter can be installed into a 1 gang electrical wall box

and fits a standard Decora wall plate cover.

The installation must conform to national and local electrical codes.

4.3 Powering the Cobra TWA

The Cobra TWA is designed to be powered by a 12VDC power supply.

NOTE:

Observe proper polarity when connecting the power supply to the unit.

Ensure the positive + lead is connected to the positive + side of the

connector. Incorrectly wiring the power connector will damage the unit.

Solutions to Common Problems

5 Solutions to Common Problems

There are no user configurable settings on the Cobra TWA.

In most cases, nearly every issue with the Cobra Series can be resolved by

checking the CAT5 termination and making sure that it’s pinned to the 568B

wiring specification. However, there may be other problems that cause the

system to not perform as it’s designed. Below are solutions to the most

common installation errors.

Problem:

No video signal at the receiver.

Solution:

Check that both units are powered.

Ensure Cable Length Compensation adjustments are set

correctly on the receiver.

Make sure the CAT5 cable is terminated correctly per the 568B

wiring specification.

Is the display device powered on and functioning?

Problem:

Poor video quality.

Solution:

Have all receiver adjustments been performed?

Check all cable connections.

Ensure Cable Length Compensation adjustments are set

correctly on the receiver.

The video signal’s refresh rate may be set too high for the display.

Reset to a lower refresh rate in your monitor-configuration menu.

Problem:

Poor audio quality.

Solution:

Powered speakers are required. Make sure speaker power is ON.

Check input source levels from the source device. Make sure the

audio source is not overdriven or underdriven.

Problem:

“Green shift” or “green washout” on multimedia signals.

Solution:

The standard video model is designed to function with DC

coupled signals in which the black level is referenced to 0 volts.

Nearly all VGA cards function this way.

Some media servers and VGA DA’s, however, provide AC

coupled signals and can cause a green color shift in the video. This

is a result of the sync clamping on the red and blue channels of the

transmitter/receiver units.

For five-component (RGB/H&V) AC coupled video, the Cobra

Transmitter unit has been designed with full DC restoration

capability. The Cobra TWA may need to be replaced with a

Universal transmitter

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Solutions to Common Problems

Appendix A Cabling Pinouts

Table 1: HD15 Video Connector PINOUT

Pin RGBHV

(VGA) RGBS RGsB Composite

SVHS

(Y/C)

YUV

1 Red + Red + Red + C+ V+

2 Green+ Green+ Green+ C+ Y+ Y+

3 Blue+ Blue+ Blue+ U+

4 — — —

5 Gnd Gnd Gnd

6 Red- Red- Red- C- V-

7 Green- Green- Green- C- Y- Y-

8 Blue- Blue- Blue- U-

9 — — —

10 Gnd Gnd —

11 Gnd Gnd —

12 — — —

13 H Sync C Sync —

14 V Sync — —

15 Gnd Gnd —

Solutions to Common Problems

Table 2: T568B CAT5 PINOUT

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Technical Specifications

6 Technical Specifications

Table 3: Technical Specifications

of the Cobra TWA

CABLE REQUIRED: Category 5, 5e, 6 shielded or unshielded twisted pair

COMPLIANCE: CE; FCC Class A, IC Class/class A

VIDEO SUPPORT: RGBHV, RGB, Composite, S-Video, Component Video modes

MAXIMUM RESOLUTION AND

REFRESH RATE 1920x1200 @ 60Hz (receiver dependent)

REQUIRED SOURCE IMPEDANCE: Video OUT: 75 ohms

Audio OUT: 600 ohms maximum

REQUIRED DESTINATION

IMPEDANCE: Video IN: 75 ohms;

Audio IN: 600 ohms minimum

AUDIO CHARACTERISTICS: Channels: Right/Left summed;

Line Level 600 Ohm Unbalanced

CONNECTORS: Front mount : (1) 3.5-mm, (1) HD15 F

RearMount:(1)RJ-45,(1)2pinterminal block powerinput

TEMPERATURE TOLERANCE: Operating: 32 to 104°F (0 to 40°C);

Storage: -4 to +140°F (-20 to +60°C)

HUMIDITY TOLERANCE: Up to 80% noncondensing

ENCLOSURE: Fits any standard US style wall box or low voltage J-Box

POWER: +12 VDC @ 180 mA max

Consumption: 2.2 watts maximum

SIZE: 2.6” H* x 1.3” W x 2.28” D (Decora Style)

(6.6 cm H* x 3.3 cm W x 5.8 cm D)

Fits in a 1-gang Decora faceplate.

* Height is 3.8” (9.7 cm) including mounting tabs

Dimensions do not include wall plate

WEIGHT: 0.09 lb. (0.04 kg)

1 Specifications are subject to change without notice

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kramer Sender Handbücher

Kramer

Kramer KW-14T Bedienungsanleitung

Kramer

Kramer TOOLS TP-104 Bedienungsanleitung

Kramer

Kramer SID-X1N Bedienungsanleitung

Kramer

Kramer TP-112HD Bedienungsanleitung

Kramer

Kramer 671T Bedienungsanleitung

Kramer

Kramer TP-15 Bedienungsanleitung

Kramer

Kramer 675T Bedienungsanleitung

Kramer

Kramer TP-185 Bedienungsanleitung

Kramer

Kramer EXT3-C-WP-XR-T Bedienungsanleitung

Kramer

Kramer VP-200XLTHD Bedienungsanleitung

Kramer

Kramer TP-210 Bedienungsanleitung

Kramer

Kramer PT-571HDCP Bedienungsanleitung

Kramer

Kramer WP-110xl Bedienungsanleitung

Kramer

Kramer WP-121 Bedienungsanleitung

Kramer

Kramer TP-210 Bedienungsanleitung

Kramer

Kramer SID-X1 Bedienungsanleitung

Kramer

Kramer Cobra TS2 Bedienungsanleitung

Kramer

Kramer TP-205A Bedienungsanleitung

Kramer

Kramer TP-752T Bedienungsanleitung

Kramer

Kramer VP-428H2 Bedienungsanleitung

Kramer

Kramer 611T Bedienungsanleitung

Kramer

Kramer 691 Bedienungsanleitung

Kramer

Kramer TP-590Txr Bedienungsanleitung

Kramer

Kramer TP-583Txr Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung