Kranzle B 10 200 Bedienungsanleitung
Operating manualOperating manual
Operating manualOperating manual
Operating manual
Read and conformRead and conform
Read and conformRead and conform
Read and conform
safety instructionssafety instructions
safety instructionssafety instructions
safety instructions
before usebefore use
before usebefore use
before use
High prHigh pr
High prHigh pr
High pressuressur
essuressur
essure cleanerse cleaners
e cleanerse cleaners
e cleaners
GB
B 10/200
B 13/150
B 16/220
2
Dear Customer
We would like to congratulate you on your new portable/mobile high
pressure cleaner and to thank you for the purchase.
To ease your introduction to the use of the cleaner, we have provided the
following pages of explanations, tips and hints.
The equipment will assist you professionally in all cleaning tasks, e.g.:
- facades
- flagstones
- terraces
- vehicles of oll
types
- sheds
- channels
DescriptionDescription
DescriptionDescription
Description
- barrels and
containers
- machines
- streets
technical
specifications B 16/220B 13/150B 10/200
10 - 200 bar
220 bar
at 1800 rpm
10 l/min
70 °C
2,5 m
10 m
-
Honda GX 200 LX
22 kg
78 dB
approx. 32 Nm
29 Nm
41.182
41.182 1
10 - 150 bar
165 bar
at 1800 rpm
13 l/min
70 °C
2,5 m
10 m
15 m
Honda GX 160 CX
24 kg
78 dB
approx. 27 Nm
24,3 Nm
41.170
41.170 1
41.170 2
10 - 220 bar
240 bar
at 1800 rpm
16 l/min
70 °C
2,5 m
10 m
15 m
Honda GX 340 CX
26 kg
81 dB
approx. 38 Nm
33 Nm
41.173 2
41.173 3*
41.173
Permissible tolerance for figures ± 5 % in accordance with VDMA uniform sheet 24411
(assumed lenght of lance: 0,9 m)
operating pressure,
steplessly adjustable
permissible
overpressure
water output
hot water input up to
suction height
high pressure hose
with hose drum
engine
weight
sound level
according to
DIN 45 635
recoil at lance
torque
order No.
portable
with undercarriage
with undercarriage
and hose drum
with speed
control *
Item
3
water
8
9
6 Injector for cleaning agents
(not with B10/200)
7 High pressure hose
8 Spray gun assembly
9 Interchangeable lance
10 Regulator nozzle
10a B10/200 only with dirt-killer
1 Water inlet connection with filter
2 Suction hose with filter
(special accessory) order No. 15.038 3
3 High pressure pump
4 Pressure gauge with glycerin filling
5 Unloader valve - safety valve
The KRÄNZLE B 10/200 + B 13/150 + B 16/220 - high pressure cleaners
are portable/mobile machines. The design can be seen from the diagram.
Construction
DescriptionDescription
DescriptionDescription
Description
1
2
3
4
5
6
7
10
4
The machine can only be operated when the safety trigger is squeezed.
When the lever ist squeezed, the spray gun opens. The liquid is then pumped to the
nozzle. The spray pressure increases and quickly reaches the selected operating
pressure.
When the trigger ist released, the trigger gun closes and any further spraying of
liquid from the lance ist stopped.
The increase in pressure when the trigger gun is closed causes the unloader valve-
safety valve to open. The pump remaines switched on and continues to pump liquid
throughthepumpatreducatedpressure.
When the trigger gun ist opened, the unloader valve - safety valve closes and the
pump ressumes pressure spraying from the lance.
The trigger gun is a safety device. Repairs should only be performed by
qualifiedpersons.Shouldreplacementparts be required, use only
componentsauthorizedbythemanufacturer.
Lance with trigger gun
The unloader valve - safety valve protects the machine from a build-up of excess
pressure, and is designed not to permit an excess pressure to be selected for
operating. The limit nut on the handle is sealed with a spray coating.
The operating pressure and spray rate can be steplessly adjusted by tuning the
handle.
Replacements,repairs,newadjustments and sealing should only be
performedbyqualifiedpersons.
Unloader valve - safety valve
Environmental,refusedisposal andwaterprotection
regulationsmustbe observed !
Water - and Cleang - Care System
Water can be connected at mains pressure to the high pressure pump or it can be
sucked directly from a storage tank.
The water is then forced under pressure by the high pressure pump to the lance.
The high pressure jet is formed by the nozzle at the end of the lance.
Cleaning and caring agents can be mixed with the water by a low pressure injector.
(notwithB10/200)
DescriptionDescription
DescriptionDescription
Description
DescriptionDescription
DescriptionDescription
Description
For the motor follow the HondaFor the motor follow the Honda
For the motor follow the HondaFor the motor follow the Honda
For the motor follow the Honda
operating manual onlyoperating manual only
operating manual onlyoperating manual only
operating manual only..
..
.
Motor-safety:
(see Honda operating manual)
5
Honda motors are safe and reliable if they are operated correctly. Read the
operating manual carefully before using the motor and try to understand the
contents of the manual completely.
Not following this advice could lead to injuries or damage of the
equipment.
To avoid a possible fire hazard and to ensure the necessary ventilation
the motor has to be operated at a distance of at least 1 m from buildings
and objects. Inflammable objects have to be kept away from the
surroundingareaofthemotor.
Children and pets have to be kept away from the motor, as there is a
danger of suffering burns from hot motor parts and to be injured by
equipmentdriven by themotor.
Get to know the motor and especially learn how to switch it off quickly.
Do not allow persons to operate the motor who are not familiar with it.
Whenrunningyour high pressure cleaner with hotwaterof70°Craised
temperaturesoccur.
Do not touch the machine without safety gloves.
CAUTION !
Never use liquid containing solvents such as paint thinners, petrol, oil or
similar liquid matter. Pay attention to the instructions of the
manufacturers of the cleaning agents. The seals in the
machine are not resistant to solvents. The spray of solvents is
inflammable,explosiveandpoisonous.
Neither set up and operate the machine in rooms where there is a risk of
fire or explosion nor put it into puddles. Do not use the machine under
water.
CAUTION !
Setting up: Location
6
DescriptionDescription
DescriptionDescription
Description
Brief operating instructions
1. Connect the high pressure hose with spray gun
and machine.
2. Connect the suitable water supply.
3. Flush the air from the pump (open and close the spray gun
severaltimes).
4. Switch on the motor while the spray gun is open and commence
cleaning.
5. After completing the work, completely empty the pump
(switch the motor on for approximately 20 seconds without the
suction and pressure hose).
Afterwards you can roll up the high pressure hose.
- Only use clean water ! Protect from frost !
CAUTION !
Please pay attention to the regulations of your waterworks company.
In accordance with DIN 1988, the machine may not be directly connected to the
public drinking water supply lines.
Abriefconnectionhowever ist permissible according to DVGW (German
Association for Gas and Water Affairs) if a tube ventilator with check valve
(KRÄNZLE Order-No. 41.016 4) is built into the water supply.
Also indirect connection to the public drinking water supply lines is permissible by
way of free emission in accordance with DIN 1988, part 4; e.g. by using a reservoir
with a float valve.
Direct connection to a non-drinking water supply line is permissible.
High pressure hose and spray device
The high pressure hose and spray device supplied with the machine are made of
high grade material, they are also optimized for the machine and marked as
requiredbytheappropriateregulations.
If replacement parts are required, only such parts that are authorized by
themanufacturerandwhich bear the markings required by the
appropriateregulationsmaybe used. The high pressure hose andspray
device must be connected in a pressure-tight manner. The high pressure
hose may not be driven over, pulled excessively, or twisted. The hose
may under no circumstances be pulled over sharp edges, since
otherwise the guarantee is automatically void.
7
Always aim the
underbody lance. Note
when using an angle
underbody lance, like
for example lance
No. 41.075, that there
is a certain amount of
torque (twisting
motion) in the recoil.
(See also notice on
page 2).
As to the recoil -
see notice on page 2.
Apply the safety catch on the
spray gun after each use, in
order to prevent
unintentional spraying.
Safety notesSafety notes
Safety notesSafety notes
Safety notes
8
This is what you´ve purchased :This is what you´ve purchased :
This is what you´ve purchased :This is what you´ve purchased :
This is what you´ve purchased :
1. Spray lance with regulator and
high pressure nozzle, flat spray
(B10/200 only with dirt-killer)
2. Spray gun with insulated pistol
grip and screw connection
3. KRÄNZLE - High pressure cleaner
B 10/200 B 13/150 B 16/220
4. High pressure hose 10 m
15 m HP-hose for cleaners
with hose drum
5. Suction hose
6. Operating instructions pump
Operating instructions motor
7. Washing powder
specimen
8. Water inlet components
9
1. Oil-measuring stick
Prepare for usePrepare for use
Prepare for usePrepare for use
Prepare for use
2. Connect the high pressure
lance to the spray gun.
3. Unwind the high pressure hose
without leaving kinks or "nooses"
and connect it to the spray gun and
pump. When using extension
hoses, use max. 20 m high
pressure hose, or 2 x 10 m with
hose connectors.
The high pressure hose
connected from the machine to
the lance.
10
Water
CAUTION !
5. Maximum induction height 2.5 m
- see technical data
on page 2.
Please make
sure that the filter is
clean before using
your
high pressure cleaner.
4. The machine can be connected
to a pressurised water line with cold
or 60 °C respectively 70 °C hot water
(see
page 2).
Ensure that the water supply ist clean
when sucking from external sources.
The hose cross section must be
at least 1/2" = 12.7 mm (free
passage). Filter 1 must
always be clean.
Preparation for usePreparation for use
Preparation for usePreparation for use
Preparation for use
Whenrunningyour high pressure cleaner with hotwaterof70°Craised
temperaturesoccur.
Do not touch the machine without safety gloves.
Dieses Handbuch passt für folgende Modelle
5
Inhaltsverzeichnis
Andere Kranzle Hochdruckreiniger Handbücher
Kranzle
Kranzle 1120 T Bedienungsanleitung
Kranzle
Kranzle 2170TST Bedienungsanleitung
Kranzle
Kranzle quadro 9/170 TST Bedienungsanleitung
Kranzle
Kranzle 2160 TS T Bedienungsanleitung
Kranzle
Kranzle K 1050 TS T Bedienungsanleitung
Kranzle
Kranzle quadro 599 TST Bedienungsanleitung
Kranzle
Kranzle quadro 800 TST Bedienungsanleitung
Kranzle
Kranzle Therm 870-1 Bedienungsanleitung
Kranzle
Kranzle X A15 TST Bedienungsanleitung
Kranzle
Kranzle 1120 T Bedienungsanleitung
Kranzle
Kranzle therm 890 Bedienungsanleitung
Kranzle
Kranzle X 8/150 TST Bedienungsanleitung
Kranzle
Kranzle quadro 599 TST Bedienungsanleitung
Kranzle
Kranzle HD 7/120 Bedienungsanleitung
Kranzle
Kranzle K1622 Bedienungsanleitung
Kranzle
Kranzle K 1050 P Bedienungsanleitung
Kranzle
Kranzle B 170 T Bedienungsanleitung
Kranzle
Kranzle therm 895 ST Bedienungsanleitung
Kranzle
Kranzle 1132 Bedienungsanleitung
Kranzle
Kranzle quadro 1000 TS Bedienungsanleitung
