KRUG+PRIESTER IDEAL 5255 Bedienungsanleitung

EN Operating Instructions

Guillotines

www.ideal.de

IDEAL 4855 IDEAL 5255

IDEAL 6655

- 2 -

Table of Contents

Safety precautions 3

Intended use 4

Operating elements 5

Installation 10

Startup 12

Operation 15

Blade and cutting stick replacement 26

Maintenance and cleaning 35

Annual inspection / Safety test 36

Possible malfunctions 37

Accessories 42

Technical data 43

EC-declaration of conformity 46

- 3 -

Safety precautions

Please read these operating instructions before putting the machine into

operation and observe the safety precautions.

The operating instructions must always be available.

Children must not operate the machine!

Do not reach beneath the blade!

Never leave the blade unattended!

Do not extract or transport the blade without

protection! (See page 29 and 31).

Danger! Risk of injury!

Do not cut hard materials or materials which

may splinter!

- 4 -

Intended use

The machine is designed for cutting stacks of

paper to a specied size.

This machine is constructed for "one-man

operation" only!

Warning! Clips or similar damage the

cutting blade.

Safety precautions / Intended use

Do not use any spray cans with flammable

content near to the cutting machine!

Do not use any flammable cleaning agents.

- 5 -

Disconnect from the mains before starting any

service work or before removing the panels!

Replacement of blade and cutting stick may

be performed only when the main switch is

switched off!

Operating elements

ASafety two-handed control system

Pre-clamping and cutting

BOverload switch (blade drive/clamp drive/

backgauge drive)

CBackgauge control

DMain switch

EHand-wheel for backgauge setting

FKey switch

GBackgauge

HSide lay left and right

IFront safety guard

Safety precautions / Operating elements

- 6 -

All components which could endanger the

operator are covered by a guard!

Operating the machine without safety device is

forbidden!

(Front safety guard (A), rear screwed safety

guard (B) and panel (C).

Safety precautions

- 7 -

The dangerous cutting movement is

safeguarded by a movable guard (A) and a

safety two-handed control system! (B)

Before working with the machine and after

every blade replacement the automatic cut-off

function of safety guard (A),(correct if distance

between cover and table is < 20 mm) main

switch (B) and control panel (C) must be

checked.

Safety precautions

- 8 -

230V / 10A min

115V / 15A min

Connect the power cord to a single phase

socket.

Ensure free access to mains!

When not in use for a longer period switch off.

(Main switch to "0").

Safety precautions

- 9 -

Danger!

Blade must always be covered by the

pressing bar.

Protect mains cable against heat, oil and

sharp edges!

Clamping Blade

Safety precautions

- 10 -

Remove the stand from the wooden pallet.

4 strong people are required to lift the machine

from the pallet and place it on the stand.

Secure with 4 screws (A). Put the shelf (B) on

the stand. (Parts and tools are in the tool set

(C).

Installation

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere KRUG+PRIESTER Cutter Handbücher

KRUG+PRIESTER

KRUG+PRIESTER EBA Series Bedienungsanleitung

KRUG+PRIESTER

KRUG+PRIESTER IDEAL 6655 Bedienungsanleitung

KRUG+PRIESTER

KRUG+PRIESTER IDEAL 4705 Bedienungsanleitung

KRUG+PRIESTER

KRUG+PRIESTER IDEAL 4855 Bedienungsanleitung

KRUG+PRIESTER

KRUG+PRIESTER EBA Series Bedienungsanleitung

KRUG+PRIESTER

KRUG+PRIESTER IDEAL 5560 Bedienungsanleitung

KRUG+PRIESTER

KRUG+PRIESTER IDEAL 1138 Bedienungsanleitung

KRUG+PRIESTER

KRUG+PRIESTER IDEAL THE 56 Bedienungsanleitung

KRUG+PRIESTER

KRUG+PRIESTER IDEAL 4815 Bedienungsanleitung

KRUG+PRIESTER

KRUG+PRIESTER IDEAL 4305 Bedienungsanleitung

KRUG+PRIESTER

KRUG+PRIESTER EBA 4855 Bedienungsanleitung

KRUG+PRIESTER

KRUG+PRIESTER IDEAL 5560 Bedienungsanleitung

KRUG+PRIESTER

KRUG+PRIESTER IDEAL 3005 Bedienungsanleitung

KRUG+PRIESTER

KRUG+PRIESTER IDEAL 4860 ET Bedienungsanleitung

KRUG+PRIESTER

KRUG+PRIESTER EBA 5255 Bedienungsanleitung

Beliebte Cutter Handbücher anderer Marken

Milwaukee

Milwaukee HEAVY DUTY M12 FCOT Bedienungsanleitung

SignWarehouse.com

SignWarehouse.com Bobcat BA-60 Bedienungsanleitung

Makita

Makita 4112HS Bedienungsanleitung

GEISMAR STUMEC

GEISMAR STUMEC MTZ 350S Bedienungsanleitung

Hitachi

Hitachi CM 4SB2 Fehlerbehebungshandbuch

Dexter Laundry

Dexter Laundry 800ETC1-20030.1 Bedienungsanleitung

GCC Technologies

GCC Technologies AFJ-24S Bedienungsanleitung

DeWalt

DeWalt XR LI-ION DCS350N Bedienungsanleitung

Baudat

Baudat ES1 Bedienungsanleitung

Mafell

Mafell ZAF 200 Leitfaden

Makita

Makita 4100NH Bedienungsanleitung

Formax

Formax FD 574 Bedienungsanleitung

EINHELL

EINHELL TE-MA 1500 Bedienungsanleitung

Husqvarna

Husqvarna Cut-n-Break K 760 Bedienungsanleitung

CLEAN ROOM DEVICES

CLEAN ROOM DEVICES CRD130SS Bedienungsanleitung

TRI tool

TRI tool 301A Bedienungsanleitung

Roller

Roller King 1 1/4 Bedienungsanleitung

RODCRAFT

RODCRAFT RC7170 Bedienungsanleitung