Introduction
Dear customer!
Thank you for buying one of our products.
You can find all the information you need in these operating instructions.
Please read the instructions completely with care and observe the advice given.
The operating instructions are part of the plastic repair kit and should be kept intact.
The manufacturer is not liable for personal injuries and material damages which result from improper use.
1. Safety instructions
1.1 General safety and operating instructions
- Always wear during operating the prescribed personal protective equipment as laid down by the UVV or national
legislation such as for example safety shoes, helmet, protective glasses, safety gloves etc.
- Devices with revolving or movable parts can get caught up in hair, clothing, jewellery or other loose its, which can
lead to severe injury. For this reason never wear clothing that is too loose and/or fitted with bands or bows etc.
Remove jewellery, wristwatches, bracelets, necklaces etc. Never touch -device parts that are moving. Long hair
should be tied up or protected by a hair net.
- Take care that when working with the device that you have a correct and secure standing position.
- Never use the device whilst under the influence of alcohol or drugs or when tired.
- Never point the device at other persons.
- Children and third parties must always be kept away from the working area when operating the device.
- Labelling on the device must always be easily readable. The operator is responsible for the fact that the identification
plate with technical data, safety, warning, operating instructions, serial and article numbers are easily readable and
never removed.
- Protective devices and/or housing parts may not be removed or modified.
- Never operate the device if any protective cover is missing or if all safety devices do not exist and are in a
perfect condition.
- Devices may generally only be utilized for the correct purpose, under the laid down conditions and within the
utilization limitations. Also always take note of the manufacturers instructions of the object to be processed
(for example: vehicle, machine, plant etc.).
- Ensure that the working area is orderly, well ventilated and has adequate lighting.
- Devices can cause electric shocks, which can lead to combustible materials catching fire. For this reason devices
should never be operated in the proximity of combustible substances, cleaning mediums etc.
- Keep electric cables and compressed air pipelines away from heat sources, oil, aggressive chemicals and protect
them from unintentional mechanical influences.
- Secure revolving parts against unintentional loosening.
- Only utilise spare parts, attachments and accessories recommended by the manufacturer.
- Store devices not in use securely and correctly.
- If there is the smallest uncertainty concerning any point in the operating instructions exists, then operating
recommendations should be obtained from the factory to clear any uncertainty
1.2 Operator responsibilities
- Inform yourself of the correct method of utilization of the device prior to its utilization taking the required necessary
safety measures into consideration.
- The operating instructions are a subject matter of the device and must be stored in close proximity.
- The legal accident prevention regulations as well as the generally recognised safety and work medicinal rule must be
complied with.
- Prior to utilization ensure that the device is in perfect condition and if necessary exchange damaged and/or
work parts.
