Dear Customer,
KS TOOLS thanks you for you trust and for buying one of its products.
In this manual, you will find every safety warnings and precautions, operating, maintenance and
cleaning procedures. Please, read it carefully before using the product. Keep this manual and invoice
in a safe and dry place for future reference.
The manufacturer cannot be held responsible for damage or injury caused by improper use of this
appliance.
TOOL SPECIFICATION
Capacity : 310 ml
Air Inlet : 1/4” NPT
Hose Size : 3/8” I.D. (10 mm)
Air Pressure : 65 P.S.I. (4.5 bar)
Average Air Consumption : 4 CFM (113 L/min)
Length : 305 mm
Weight : 1,1 kgs
SAFETY RULES
READ, UNDERSTAND AND KEEP THESE INSTRUCTIONS, WARNING Failure to follow all instructions
listed below may result in serious injury.
WORK AREA HAZARD & PERSONAL SAFETY
1. Keep your work area clean and well lit.
2. Do not operate power tools in explosive atmospheres. (In presence of combustible liquid, gases
or dust). Power tool create sparks which may kindle the dust or fumes.
3. Disconnect tool before performing service or when not in use.
4. High sound levels can cause permanent hearing loss. Use hearing protection during operation.
5. Maintain a balanced body position and secure footing.
6. Slip/Trip/Fall is a major cause of serious injury or death. Be aware of excess hose left on the
walking or work ground.
7. Repetitive work motions, awkward positions and exposure to vibration can be harmful to hands
and arms. If numbness, tingling, pain or whitening of the skin occurs, stop using the tool and
consult a physician.
8. Always wear impact-resistant eye and face protection when operating the tool. Near the
operation, repairing, maintaining or when changing accessories on the tool.
TOOL USE AND CARE
1. Use support handle or other practical ways to secure and support the work piece to a stable
platform.
2. Do not force the tool. Use the correct tool for your application. The correct tool can do the job
better and more secure at the rate of tool designed.
3. Disconnect the air supply before making any adjustments, changing accessories, or storing the
tool. Always disconnect the air supply before performing any inspection, maintenance, or
cleaning the tool.
4. Use only accessories recommended by the manufacturer for your model.
5. When using a tool that is designed to have a guard, the guard should be in place to offer
protection from flying debris, grinding swarf, or sparks.
