KSB Amacan P Montageanleitung

Submersible Pump in Discharge Tube

Amacan P

50 Hz

Amacan P 700 - 470

Amacan P 800/900 - 540

Amacan P 1000 - 700

Amacan P 1200 - 870

Amacan P 1500/1600 - 1060

Installation/Operating Manual

Mat. No.: 01137299

Legal information/Copyright

Installation/Operating Manual Amacan P

Original operating manual

processed for any other purpose, nor otherwise transmitted, published or made available to a third party without

the manufacturer's express written consent.

Subject to technical modification without prior notice.

Contents

1 General ..................................................................................................6

1.1 Principles ........................................................................................................... 6

1.2 Installation of partly completed machinery .................................................... 6

1.3 Target group ..................................................................................................... 6

1.4 Other applicable documents ............................................................................ 6

1.5 Symbols ............................................................................................................. 6

2 Safety .....................................................................................................7

2.1 Key to safety symbols/markings ....................................................................... 7

2.2 General .............................................................................................................. 7

2.3 Intended use ..................................................................................................... 7

2.4 Personnel qualification and training ............................................................... 8

2.5 Consequences and risks caused by non-compliance with this manual ......... 8

2.6 Safety awareness .............................................................................................. 8

2.7 Safety information for the operator/user ....................................................... 8

2.8 Safety information for maintenance, inspection and installation work ....... 9

2.9 Unauthorised modes of operation .................................................................. 9

2.10 Explosion protection ........................................................................................ 9

3 Transport/Temporary Storage/Disposal .............................................11

3.1 Checking the condition upon delivery .......................................................... 11

3.2 Transport ......................................................................................................... 11

3.3 Storage/preservation ...................................................................................... 14

3.4 Return to supplier ........................................................................................... 15

3.5 Disposal ........................................................................................................... 16

4 Description of the Pump (Set) ............................................................17

4.1 General description ........................................................................................ 17

4.2 Designation ..................................................................................................... 17

4.3 Name plate ...................................................................................................... 17

4.4 Design details .................................................................................................. 18

4.5 Installation types ............................................................................................ 18

4.6 Configuration and function ........................................................................... 19

4.7 Scope of supply ............................................................................................... 20

4.8 Dimensions and weights ................................................................................ 20

5 Installation at Site ...............................................................................21

5.1 Safety regulations ........................................................................................... 21

5.2 Checks to be carried out prior to installation ............................................... 21

5.3 Lowering the pump set into the discharge tube .......................................... 24

5.4 Electrical system .............................................................................................. 34

6 Commissioning/Start-up/Shutdown ...................................................42

Contents

Amacan P 3 of 124

6.1 Commissioning/start-up ................................................................................. 42

6.2 Operating limits .............................................................................................. 43

6.3 Shutdown/storage/preservation .................................................................... 45

6.4 Returning to service ....................................................................................... 46

7 Servicing/Maintenance .......................................................................47

7.1 Safety regulations ........................................................................................... 47

7.2 Maintenance/inspection ................................................................................. 48

7.3 Removing the pump set ................................................................................. 50

7.4 Lubrication and lubricant change ................................................................. 53

7.5 Dismantling the pump set .............................................................................. 57

7.6 Reassembling the pump set ........................................................................... 63

7.7 Checking the electrical connection and motor ............................................. 76

7.8 Tightening torques ........................................................................................ 76

7.9 Spare parts stock ............................................................................................. 76

8 Trouble-shooting ................................................................................78

9 Related Documents ............................................................................79

9.1 General assembly drawing ............................................................................. 79

9.2 Cable bundle ................................................................................................... 89

9.3 Wiring diagrams ............................................................................................. 91

9.4 Flamepaths on explosion-proof motors ........................................................ 96

9.5 Dimensions ...................................................................................................... 97

9.6 Wiring diagrams ........................................................................................... 101

10 EC Declaration of Conformity ..........................................................120

11 Certificate of Decontamination .......................................................121

Index ..................................................................................................122

Contents

4 of 124 Amacan P

Glossary

Certificate of decontamination

A certificate of decontamination is enclosed by

the customer when returning the product to

the manufacturer to certify that the product

has been properly drained to eliminate any en-

vironmental and health hazards arising from

components in contact with the fluid handled.

Close-coupled design

Motor directly fitted to the pump via a flange

or a drive lantern

ECB (ever clean blade) design

Self-cleaning vane profile

Submersible pump in discharge tube

A submersible motor pump which is completely

submerged and suspended in a discharge tube

Glossary

Amacan P 5 of 124

1 General

1.1 Principles

This manual is supplied as an integral part of the type series and variants indicated

on the front cover. It describes the proper and safe use of this equipment in all pha-

ses of operation.

The name plate indicates the type series and size, the main operating data, the order

number and the order item number. The order number and order item number

uniquely identify the pump (set) and serve as identification for all further business

processes.

In the event of damage, contact your nearest KSB service centre immediately to

maintain the right to claim under warranty.

1.2 Installation of partly completed machinery

To install partly completed machinery supplied by KSB refer to the sub-sections under

Servicing/Maintenance.

1.3 Target group

This operating manual is aimed at the target group of trained and qualified specialist

technical personnel. (⇨ Section 2.4 Page 8)

1.4 Other applicable documents

Table 1: Overview of other applicable documents

Document Contents

Data sheet Description of the technical data of the pump

(set)

Hydraulic characteristic curve Characteristic curves showing head, NPSH re-

quired, efficiency and power input

General assembly drawing1) Sectional drawing of the pump set

Sub-supplier product literature1) Operating manuals and other product literature

describing accessories and integrated machinery

components

Spare parts lists1) Description of spare parts

For accessories and/or integrated machinery components observe the relevant manu-

facturer's product literature.

1.5 Symbols

Table 2: Symbols used in this manual

Symbol Description

✓Conditions which need to be fulfilled before proceeding with the

step-by-step instructions

⊳Safety instructions

⇨Result of an action

⇨Cross-references

Step-by-step instructions

Note

Recommendations and important information on how to handle

the product

1) If agreed to be included in the scope of supply

1 General

6 of 124 Amacan P

2 Safety

All the information contained in this section refers to hazardous situations.

2.1 Key to safety symbols/markings

Table 3: Definition of safety symbols/markings

Symbol Description

!DANGER

DANGER

This signal word indicates a high-risk hazard which, if not avoided,

will result in death or serious injury.

!WARNING

WARNING

This signal word indicates a medium-risk hazard which, if not avoi-

ded, could result in death or serious injury.

CAUTION

This signal word indicates a hazard which, if not avoided, could re-

sult in damage to the machine and its functions.

Explosion protection

This symbol identifies information about avoiding explosions in

potentially explosive atmospheres in accordance with EC Directive

94/9/EC (ATEX).

General hazard

In conjunction with one of the signal words this symbol indicates a

hazard which will or could result in death or serious injury.

Electrical hazard

In conjunction with one of the signal words this symbol indicates a

hazard involving electrical voltage and identifies information

about protection against electrical voltage.

Machine damage

In conjunction with the signal word CAUTION this symbol indicates

a hazard for the machine and its functions.

2.2 General

This manual contains general installation, operating and maintenance instructions

that must be observed to ensure safe pump operation and prevent personal injury

and damage to property.

The safety information in all sections of this manual must be complied with.

This manual must be read and completely understood by the specialist personnel/

operators responsible prior to installation and commissioning.

The contents of this manual must be available to the specialist personnel at the site

at all times.

Information attached directly to the pump must always be complied with and be

kept in a perfectly legible condition at all times. This applies to, for example:

▪Arrow indicating the direction of rotation

▪Markings for connections

▪Name plate

The operator is responsible for ensuring compliance with all local regulations not tak-

en into account in this manual.

2.3 Intended use

▪The pump (set) must only be operated within the operating limits described in

the other applicable documents.

▪Only operate pumps/pump sets which are in perfect technical condition.

▪Do not operate the pump (set) in partially assembled condition.

▪Only use the pump to handle the fluids described in the data sheet or product

literature of the pump model or variant.

!DANGER

2 Safety

Amacan P 7 of 124

▪Never operate the pump without the fluid to be handled.

▪Observe the limits for continuous operation specified in the data sheet or prod-

uct literature (Qmin and Qmax) (to prevent damage such as shaft fracture, bearing

failure, mechanical seal damage, etc).

▪Observe the maximum flow rates indicated in the data sheet or product litera-

ture (to prevent overheating, mechanical seal damage, cavitation damage, bear-

ing damage, etc.).

▪Consult the manufacturer about any use or mode of operation not described in

the data sheet or product literature.

Prevention of foreseeable misuse

▪Observe the minimum flow velocities required to fully open the swing check

valves to prevent the reduction of pressure and risk of clogging.

(Contact the manufacturer for the required minimum flow velocities/loss coeffi-

cients.)

▪Never exceed the permissible operating limits specified in the data sheet or prod-

uct literature regarding pressure, temperature, etc.

▪Observe all safety information and instructions in this manual.

2.4 Personnel qualification and training

All personnel involved must be fully qualified to transport, install, operate, maintain

and inspect the machinery this manual refers to.

The responsibilities, competence and supervision of all personnel involved in trans-

port, installation, operation, maintenance and inspection must be clearly defined by

the operator.

Deficits in knowledge must be rectified by means of training and instruction provi-

ded by sufficiently trained specialist personnel. If required, the operator can commis-

sion the manufacturer/supplier to train the personnel.

Training on the pump (set) must always be supervised by technical specialist person-

nel.

2.5 Consequences and risks caused by non-compliance with this manual

▪Non-compliance with this operating manual will lead to forfeiture of warranty

cover and of any and all rights to claims for damages.

▪Non-compliance can, for example, have the following consequences:

–Hazards to persons due to electrical, thermal, mechanical and chemical ef-

fects and explosions

– Failure of important product functions

– Failure of prescribed maintenance and servicing practices

– Hazard to the environment due to leakage of hazardous substances

2.6 Safety awareness

In addition to the safety information contained in this manual and the intended use,

the following safety regulations shall be complied with:

▪Accident prevention, health and safety regulations

▪Explosion protection regulations

▪Safety regulations for handling hazardous substances

▪Applicable standards, directives and laws

2.7 Safety information for the operator/user

▪The operator shall fit contact guards for hot, cold and moving parts and check

that the guards function properly.

▪Do not remove any contact guards during operation.

2 Safety

8 of 124 Amacan P

▪Provide the personnel with protective equipment and make sure it is used.

▪Contain leakages (e.g. at the shaft seal) of hazardous fluids handled (e.g. explo-

sive, toxic, hot) so as to avoid any danger to persons and the environment. Ad-

here to all relevant laws.

▪Eliminate all electrical hazards. (In this respect refer to the applicable national

safety regulations and/or regulations issued by the local energy supply compa-

nies.)

▪If shutting down the pump does not increase potential risk, fit an emergency-

stop control device in the immediate vicinity of the pump (set) during pump set

installation.

2.8 Safety information for maintenance, inspection and installation work

▪Modifications or alterations of the pump are only permitted with the manufac-

turer's prior consent.

▪Use only original spare parts or parts authorised by the manufacturer. The use of

other parts can invalidate any liability of the manufacturer for resulting damage.

▪The operator ensures that all maintenance, inspection and installation work is

performed by authorised, qualified specialist personnel who are thoroughly fa-

miliar with the manual.

▪Only carry out work on the pump (set) during standstill of the pump.

▪The pump casing must have cooled down to ambient temperature.

▪Pump pressure must have been released and the pump must have been drained.

▪When taking the pump set out of service always adhere to the procedure descri-

bed in the manual. (⇨ Section 6.3 Page 45)

▪Decontaminate pumps which handle fluids posing a health hazard.

▪As soon as the work has been completed, re-install and/or re-activate any safety-

relevant and protective devices. Before returning the product to service, observe

all instructions on commissioning. (⇨ Section 6.1 Page 42)

2.9 Unauthorised modes of operation

Never operate the pump (set) outside the limits stated in the data sheet and in this

manual.

The warranty relating to the operating reliability and safety of the supplied pump

(set) is only valid if the equipment is used in accordance with its intended use.

2.10 Explosion protection

Always observe the information on explosion protection given in this section when

operating an explosion-proof pump set.

Sections of the manual marked by the Ex symbol apply to explosion-proof pump sets

also when temporarily operated outside potentially explosive atmospheres.

Only pumps/pump sets marked as explosion-proof and identified as such in the data

sheet must be used in potentially explosive atmospheres.

Special conditions apply to the operation of explosion-proof pump sets in accordance

with EC Directive 94/9/EC (ATEX).

Especially adhere to the sections in this manual marked with the Ex symbol.

The explosion-proof status of the pump set is only assured if the pump set is used in

accordance with its intended use.

Never operate the pump (set) outside the limits stated in the data sheet and on the

name plate.

Prevent impermissible modes of operation at all times.

!DANGER

2 Safety

Amacan P 9 of 124

2.10.1 Repair

Special regulations apply to repair work on explosion-proof pumps. Modifications or

alterations of the pump set can affect explosion protection and are only permitted

after consultation with the manufacturer.

Repair work at the flameproof joints must only be performed in accordance with the

manufacturer's instructions. Repair to the values in tables 1 and 2 of EN 60079-1 is

not permitted.

2 Safety

10 of 124 Amacan P

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere KSB Wasserpumpe Handbücher

KSB

KSB AmaDrainer 3 Montageanleitung

KSB

KSB Multiboost Bedienungsanleitung

KSB

KSB Calio-Therm NC Montageanleitung

KSB

KSB Vitalobe Montageanleitung

KSB

KSB Ixo-Pro Montageanleitung

KSB

KSB Evamatic-Box N 200 l Montageanleitung

KSB

KSB ITUR IFV-32 Bedienungsanleitung

KSB

KSB Multi Eco Montageanleitung

KSB

KSB Ama-Drainer 4 Series Montageanleitung

KSB

KSB AU-1,5 Betriebsanleitung

KSB

KSB Magnochem Montageanleitung

KSB

KSB Hya-Rain Eco Montageanleitung

KSB

KSB CORA 1C Bedienungsanleitung

KSB

KSB Sewatec Montageanleitung

KSB

KSB AmaPorter SB 545 SE Montageanleitung

KSB

KSB UPA Montageanleitung

KSB

KSB Vitaprime Montageanleitung

KSB

KSB RPH Montageanleitung

KSB

KSB Movitec VCI Montageanleitung

KSB

KSB Magnochem-Bloc Montageanleitung

KSB

KSB Rio-Eco N Series Montageanleitung

KSB

KSB INVCP Bedienungsanleitung

KSB

KSB Ama-Drainer100 Montageanleitung

KSB

KSB Amarex KRT Montageanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung