KSB Magnochem Series Bedienungsanleitung

Setting the Oil Level

Magnochem

Supplementary Operating

Manual

Legal information/Copyright

Supplementary Operating Manual Setting the Oil Level

Original operating manual

edited or processed for any other purpose, nor otherwise transmitted, published or made available to a

third party without the manufacturer's express written consent.

Subject to technical modification without prior notice.

Contents

3 of 8

Setting the Oil Level

Contents

1 General.................................................................................................................................................... 4

1.1 Adjusting the eccentric ....................................................................................................................................4

1 General

4 of 8 Setting the Oil Level

1 General

This supplementary operating manual accompanies the installation/operating

manual. All information contained in the installation/operating manual must be

observed.

Table1: Relevant operating manuals

Type series Reference number of the installation/operating

manual

Magnochem 2747.8

Manufacturer's product

literature

For accessories and/or integrated machinery components observe the relevant

manufacturer's product literature.

1.1 Adjusting the eccentric

DANGER

Oil level in bearing bracket too low

Explosion hazard!

Damage to the rolling element bearings and outer rotor!

▷Fit and adjust the eccentric as described.

▷Correctly set the oil level.

NOTE

An excessively high oil level can lead to a temperature rise and to leakage of the

fluid handled or oil.

Fig.1: Determining the adjusting dimensions

A Distance between bottom of shaft stub and top of socket end of

eccentric

B Distance between bottom of socket end of eccentric and reference

plane

C Distance between bottom of shaft stub and reference plane

330 Bearing bracket

344 Bearing bracket lantern

1 General

5 of 8

Setting the Oil Level

638 Constant level oiler

62-1.49 Eccentric

Fig.2: Eccentric

1 Stud end 2 Disc

3 Socket end (cylindrical reference

surface for setting the oil level)

Table2: Adjusting dimensions

Bearing

bracket

Magnetic coupling Adjusting dimension "A" [mm] Adjusting dimension "B" [mm]

CS40 085 / 123 18 +/- 0,5 C - 37+/-0,5

CS50 085 / 123 / 172 14 +/- 0,5 C - 33+/- 0,5

CS60 085 / 123 / 172 9 +/- 0,5 C - 28+/- 0,5

CS50 235 24 +/- 0,5 C - 43 +/- 0,5

CS60 235 19 +/- 0,5 C - 38 +/- 0,5

CS80 172 / 235 / 265 16 +/- 0,5 C - 35 +/- 0,5

üBearing bracket lantern 344 and bearing bracket 330 have been horizontally

aligned following maintenance work.

1. Wrap the stud end of eccentric 62-1.49 with sealing tape to seal the threads.

2. Screw eccentric 62-1.49 into bearing bracket 330.

3. Provide a common reference plane for determining dimensions B and C (e.g. by

placing an adequately sized flat bar underneath).

4. Determine dimension C (see Fig.: Determining the adjusting dimensions), taking

care to measure outside of the key area.

5. Determine adjusting dimension B in accordance with the Table: Determining the

adjusting dimensions.

6. Adjust the socket end of eccentric 62-1.49 to dimension B by turning the disc of

eccentric 62-1.49 with an open-end engineer's wrench (WAF 26). Take care to

ensure that the connection between bearing bracket 330 and the stud end

remains tight.

7. Wrap the stud end of constant level oiler 638 with sealing tape to seal the

threads.

8. Screw constant level oiler 638 into the socket end of eccentric 62-1.49, taking

care to ensure that dimension B is not altered. Use an open-end engineer's

wrench to hold the disc of eccentric 62-1.49 in position if necessary.

NOTE

If it is not possible to provide a common reference plane, the eccentric can also be

positioned via adjusting dimension A.

9. Horizontally align the top of the glass reservoir of constant level oiler 638.

10. Check adjusting dimension B and adjust as necessary.

KSB SE & Co. KGaA

Johann-Klein-Straße 9 • 67227 Frankenthal (Germany)

Tel. +49 6233 86-0

www.ksb.com

2747.803/03-EN (01601853)

Inhaltsverzeichnis

Andere KSB Wasserpumpe Handbücher

KSB

KSB Sewatec Series Bedienungsanleitung

KSB

KSB Rio-Therm N Bedienungsanleitung

KSB

KSB Amarex N F 80-220/034U LG-120 Bedienungsanleitung

KSB

KSB MEGAFLOW 50-160 Bedienungsanleitung

KSB

KSB BEV Bedienungsanleitung

KSB

KSB Etaseco Series Montageanleitung

KSB

KSB Movitec Series Montageanleitung

KSB

KSB RPH Montageanleitung

KSB

KSB RPH Series Bedienungsanleitung

KSB

KSB Ama-Drainer-Box Mini Montageanleitung

KSB

KSB Etabloc Bedienungsanleitung

KSB

KSB EtaLine Pro Series Bedienungsanleitung

KSB

KSB Rio-Therm N SL Montageanleitung

KSB

KSB Calio Montageanleitung

KSB

KSB Omega Montageanleitung

KSB

KSB moviBOOST VPt Bedienungsanleitung

KSB

KSB Riotec Series Bedienungsanleitung

KSB

KSB 4STC Montageanleitung

KSB

KSB Calio S BMS Montageanleitung

KSB

KSB UPA Montageanleitung

KSB

KSB Calio Montageanleitung

KSB

KSB Calio-Therm NC Montageanleitung

KSB

KSB Calio SI Series Montageanleitung

KSB

KSB Delta Solo SVP Montageanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung