KSB RPHb Bedienungsanleitung

Oil Mist Lubrication

RPHb

Supplementary Operating

Manual

Legal information/Copyright

Supplementary Operating Manual Oil Mist Lubrication

Original operating manual

KSB Aktiengesellschaft

All rights reserved. Contents provided herein must neither be distributed, copied, reproduced, edited

or processed for any other purpose, nor otherwise transmitted, published or made available to a third

party without KSB´s express written consent.

Subject to technical modification without prior notice.

© KSB Aktiengesellschaft Frankenthal 04.05.2012

Contents

1 Supplementary Operating Manual .................................................... 4

1.1 General ............................................................................................................ 4

1.2 Uncooled pump ............................................................................................... 4

1.3 Cooled pump ................................................................................................... 4

1.4 General assembly drawing ............................................................................. 5

Contents

Oil Mist Lubrication 3 of 6

1 Supplementary Operating Manual

1.1 General

This supplementary operating manual accompanies the operating/installation

manual. All information contained in the operating/installation manual must be

observed.

Table 1: Relevant operating manuals

Type series Reference numbers of the operating/installation

manuals

RPHb 1316.8012, 1316.8013

1.2 Uncooled pump

1.2.1 Fitting the oil mist lubrication system

1. Unscrew plugs 916.N3 and 916.N4 from the bearing brackets.

2. Screw in the pipe unions NPT 1/4" (for oil mist inlet) and NPT 1/2" (for oil mist

outlet) and connect the oil mist pipework.

3. Apply oil mist quantities as stipulated by the manufacturers of the oil mist

lubrication units used.

1.2.2 Removing the oil mist lubrication system (conversion to oil-lubricated bearings)

1. Remove screw plugs 916.N2 and flat steel elements 99-6.N1.

2. Unscrew and remove the oil mist inlet and outlet lines from the respective

connections and close the connections with plugs 916.N3/.N4.

3. Open bearing covers 361.01/360.02 and place oil rings 644.01/.02 into the bearing

brackets.

4. Fit bearing covers 361.01/360.02 again.

5. Fit vent plugs 916.N1, constant-level oilers 638.01/.03 and protective cages

169-10.01/.03 on the bearing brackets.

1.3 Cooled pump

1.3.1 Fitting the oil mist lubrication system

1. Unscrew plugs 916.N3 and 916.N4 from the bearing brackets.

2. Screw in pipe unions NPT 1/4" (for oil mist inlet) and NPT 1/2" (for oil mist outlet)

and connect the oil mist pipework.

3. Run suitable flexible tubing from the oil sump overflows at the constant-level

oilers into the oil return lines.

1.3.2 Removing the oil mist lubrication system (conversion to oil-lubricated bearings)

1. Unscrew and remove the oil mist inlet and outlet lines from the respective

connections at the bearing brackets and close the connections with plugs

NPT 1/4”/NPT 1/2” (916.N3/913.03).

2. Remove the flexible tubing from the oil sump overflows of the constant-level

oilers.

3. Fit protective cages 169-10.01/.03 on the bearing brackets.

1 Supplementary Operating Manual

4 of 6 Oil Mist Lubrication

1.4 General assembly drawing

Fig. 1: Oil mist lubrication

Table 2: List of components

Part No. Description

69-10.03 Protective housing

99-6.N1 Semi-finished product (flat steel)

361.01/.02 Bearing end cover

411.70 Joint ring

642.03 Oil level sight glass

916.N1/.N2/.N3 Plug

1 Supplementary Operating Manual

Oil Mist Lubrication 5 of 6

KSB Aktiengesellschaft

67225 Frankenthal • Johann-Klein-Str. 9 • 67227 Frankenthal (Germany)

Tel. +49 6233 86-0 • Fax +49 6233 86-3401

www.ksb.com

1316.812/04-EN

Inhaltsverzeichnis

Andere KSB Wasserpumpe Handbücher

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

moyno

moyno 2000 CC Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung