KTM 690 SMC R 2021 Handbuch

SETUP INSTRUCTIONS 2021

690 SMC R

Art. no. 3214394en

INTRODUCTION

*3214394en*

3214394en

12/2020

INTRODUCTION

Perform the work described in these setup instructions before the vehicle is delivered to the customer.

Read the setup instructions in their entirety before beginning work.

These setup instructions were written to correspond to the latest state of this series. We reserve the right to make

changes in the interest of technical advancement without at the same time updating this manual.

We shall not provide a description of general workshop methods. Likewise, safety rules that apply in a workshop

are not specified here. It is assumed that the work will be performed by a fully trained mechanic.

All specifications contained herein are non-binding. KTM Sportmotorcycle GmbH specifically reserves the right

to modify or delete technical specifications, prices, colors, forms, materials, services, designs, equipment, etc.,

without prior notice and without specifying reasons, to adapt these to local conditions, as well as to stop produc-

tion of a particular model without prior notice. KTM accepts no liability for delivery options, deviations from fig-

ures and descriptions, misprints, and other errors. The models portrayed partly contain special equipment that

does not belong to the regular scope of supply.

Reproduction, even in part, as well as copying of all kinds, is permitted only with the express written permission

of the copyright owner.

ISO 9001(12 100 6061)

KTM applies quality assurance processes that lead to the highest possible product quality as

defined in the ISO 9001 international quality management standard.

Issued by: TÜV Management Service

KTM Sportmotorcycle GmbH

Stallhofnerstraße 3

5230 Mattighofen, Austria

This document is valid for the following models:

690 SMC R EU (F9703U9)

1 MEANS OF REPRESENTATION

1.1 Symbols used

The meaning of specific symbols is described below.

Indicates an expected reaction (e.g. of a work step or a function).

Indicates an unexpected reaction (e.g. of a work step or a function).

Indicates a page reference (more information is provided on the specified page).

Indicates information with more details or tips.

Indicates the result of a testing step.

Indicates a voltage measurement.

Indicates a current measurement.

Indicates a resistance measurement.

Indicates the end of an activity including potential rework.

1.2 Formats used

The typographical formats used in this document are explained below.

Proprietary name Indicates a proprietary name.

Name®Indicates a protected name.

Brand™ Indicates a brand available on the open market.

Underlined terms Refer to technical details of the vehicle or indicate technical terms, which

are explained in the glossary.

SETUP 2

2.1 Transport mode

H02713-01

This vehicle was blocked for transport in the software.

To operate the vehicle, the vehicle electronics must be enabled.

This process is conducted during initial setup in KTM Dealer.net.

Enabling ensures that the initial setup in KTM Dealer.net is docu-

mented.

Enabling can be performed either temporarily, e.g. for a test ride,

or permanently for vehicle handover.

Info

Make sure that the vehicle is permanently enabled before

handing it over to the customer.

2.2 Diagnostics connector

S02147-10

Diagnostics connector 1is located under the engine electronics

control unit.

2.3 Unpacking and setting up the vehicle

S01530-10

–Remove the straps and the box.

S03393-01

–Remove the adhesive tape in the upper area of the motorcycle.

2 SETUP

S03394-01

–Roll down the film at the sides.

Info

To avoid damaging the motorcycle during unpacking,

leave the other films on the vehicle until you have fin-

ished work on the vehicle.

–Remove the separate enclosure and unpack it. Check that the

separate enclosure is complete using the enclosed packing list.

Info

The procedure for missing components is described in

the Customer Service Manual.

–Check the vehicle for transport damage.

Info

The procedure in the event of transport damage is

described in the Customer Service Manual.

S03395-01

–Position the throttle grip and the controls of the right handle-

bar half on the handlebar.

–Mount the screws, but do not tighten them yet.

S04680-10

–Position the handlebar.

–Position the handlebar clamp. Mount the four screws and

tighten evenly.

Guideline

Mount the handlebar clamp as shown in the figure.

Screw, handlebar

clamp

M8 20 Nm (14.8 lbf ft)

The markings Aof the handlebar scale are located cen-

trally between the handlebar clamp.

Info

The handlebar clamp is in the separate enclosure together

with the screws.

S03397-01

–Position the controls on the left handlebar half.

–Mount the screws, but do not tighten them yet.

SETUP 2

S03400-10

–Position all controls in their exact positions on the handlebar.

–Tighten screws 1and 2.

Guideline

Screw, throttle grip M5 3.5 Nm

(2.58 lbf ft)

Screw, brake assem-

bly

M6 5 Nm (3.7 lbf ft)

–Check the throttle grip for smooth operation.

–Tighten screws 3and 4.

Guideline

Screw, combination

switch, left

M5 3.5 Nm

(2.58 lbf ft)

Screw, clutch assem-

bly

M6 5 Nm (3.7 lbf ft)

S03401-01

–Assemble the hand guards and mount on both sides.

Guideline

Handle bar end

screw

M8 15 Nm (11.1 lbf ft)

S03402-01

–Mount and tighten the rear mirror adapter and the rear mirror

on both sides.

100308-01

–Mount the footrests with springs and pins. Secure the pins

using washers and cotter pins.

Footrest spring plier (58429083000)

–Remove the protective film.

–Carefully loosen and remove the tension belt over the link fork.

Info

An assistant prevents the motorcycle from falling over.

–Carefully loosen and remove the tension belts around the lower

triple clamp.

The vehicle is released at the front.

–Together with an assistant, take the vehicle off the pallet.

2 SETUP

S04681-10

–Charge the 12-V battery. ( p. 10)

–Install the 12-V battery.

–Plug in connector 5on the starter relay.

S03406-10

–Remove the rear fairing. ( p. 13)

–Take off the side cover. ( p. 13)

–Remove the rear left side cover. ( p. 14)

–Remove the rear right side cover. ( p. 14)

Info

A total of four markings 6have been added to the

underside of the rear fairing and the two side covers.

–Drill the holes for the grab handle in three steps at these

points.

Guideline

Bore diameter for the grab

handle

14.5 mm (0.571 in)

–Install the rear left side cover. ( p. 15)

–Install the rear right side cover. ( p. 15)

–Fit the rear fairing. ( p. 16)

S03411-10

–Store tool set 7in the tool set compartment.

–Mount side cover. ( p. 16)

S03407-01

–Mount the reflector.

SETUP 2

S03408-01

–Mount the reflectors with distance Bon the fork.

Guideline

Distance Bfor reflectors 100 mm (3.94 in)

Operation as a 2-seater

–Mount rear footrest bracket. ( p. 17)

Operation as a 1-seater (only if requested by customer)

Warning

Voiding of the government approval for road use and

the insurance coverage If the heel protector is fit-

ted instead of the footrest bracket, the vehicle no

longer conforms to the homologation.

The vehicle is homologated in the factory as 2-

seater.

–Set up the vehicle as standard as a 2-seater.

–If you set up the vehicle as a 1 seater, ensure

the change is entered in the registration papers

before preparing for use.

–Mount heel protector. ( p. 17)

–Refuel. ( p. 18)

–Prepare the vehicle according to the specifications in

KTM Dealer.net for handover to the customer.

–Set the kilometers or miles. ( p. 20)

3 WORK

3.1 Removing the seat

Preparatory work

–Open the fuel tank filler cap. ( p. 12)

S04383-10

Main work

–Pull on loop 1and raise the rear of the seat.

–Pull the seat back and lift it off.

Finishing work

–Close the fuel tank filler cap. ( p. 12)

3.2 Mounting the seat

S03282-10

–Hook the seat using holding lugs 1on to bushings 2, lower the seat at the rear and push it forward.

–Push locking pin 3into lock housing 4and push the back of the seat down until the locking pin locks in

place with an audible click.

–Check that the seat is correctly mounted.

3.3 Removing the 12-V battery

Warning

Risk of injury Battery acid and battery gases cause serious chemical burns.

–Keep 12 V batteries out of the reach of children.

–Wear suitable protective clothing and safety glasses.

–Avoid contact with battery acid and battery gases.

–Keep sparks or open flames away from the 12 V battery.

–Only charge 12 V batteries in well-ventilated rooms.

–Rinse the affected area immediately with plenty of water in the event of contact with the skin.

–Rinse eyes with water for at least 15 minutes and consult a doctor immediately if battery acid and

battery gases get into the eyes.

Preparatory work

–Open the fuel tank filler cap. ( p. 12)

–Remove the seat. ( p. 8)

Inhaltsverzeichnis

Andere KTM Motorrad Handbücher

KTM

KTM 200 DUKE EU Bedienungsanleitung

KTM

KTM 1290 SUPER DUKE GT 2023 Bedienungsanleitung

KTM

KTM 390 Duke Series 2019 Bedienungsanleitung

KTM

KTM 2015 450 SX-F EU Bedienungsanleitung

KTM

KTM 50 SX PRO SENIOR LC Betriebsanleitung

KTM

KTM SX-E 5 Handbuch

KTM

KTM 85 SX 2004 Betriebsanleitung

KTM

KTM 125 DUKE 2021 Bedienungsanleitung

KTM

KTM 250 SX-F EU Handbuch

KTM

KTM 65 SX 2018 Bedienungsanleitung

KTM

KTM 1290 SUPER ADVENTURE S 2021 Handbuch

KTM

KTM 2011 690 SMC EU Betriebsanleitung

KTM

KTM 450 SXS-F Betriebsanleitung

KTM

KTM 50 SX 2019 Bedienungsanleitung

KTM

KTM 390 DUKE 2024 Bedienungsanleitung

KTM

KTM 400 LC4-E Benutzerhandbuch

KTM

KTM 690 Enduro R Bedienungsanleitung

KTM

KTM 350 EXC-F 2017 Handbuch

KTM

KTM 450 SMR Bedienungsanleitung

KTM

KTM 1998 400 R Benutzerhandbuch

KTM

KTM 450 EXC EU 2014 Handbuch

KTM

KTM 250 SX 2020 Bedienungsanleitung

KTM

KTM 990 Supermoto R 2011 Handbuch

KTM

KTM 85 SX 2020 Handbuch

Beliebte Motorrad Handbücher anderer Marken

OHVALE

OHVALE GP-0 Stücklistenhandbuch

Yamaha

Yamaha Star XV19CTSZ 2009 Bedienungsanleitung

HYOSUNG

HYOSUNG ST7 Bedienungsanleitung

Husqvarna

Husqvarna FC 250 2016 Bedienungsanleitung

Ducati

Ducati SCRAMBLER 800 Gebrauchsanweisung

MOTO GUZZI

MOTO GUZZI QUOTA 1100 ES Bedienungsanleitung

APRILIA

APRILIA ETV MILLE CAPONORD - PART1 02-2001 Bedienungsanleitung

Yamaha

Yamaha 2006 YZF-R1V Bedienungsanleitung

Fantic

Fantic Enduro 125 Bedienungsanleitung

Ducati

Ducati Supersport 750 desmodue Bedienungsanleitung

MV Agusta

MV Agusta 2008 F4 312RR 1078 Gebrauchsanweisung

Yamaha

Yamaha XVS650A Bedienungsanleitung

Yamaha

Yamaha YZF-R6T(C) Handbuch

Ducati

Ducati 748 monoposto strada Bedienungsanleitung

ATK

ATK 1988 250 Bedienungsanleitung

Excelsior-HENDERSON

Excelsior-HENDERSON 1999 HCX Bedienungsanleitung

Triumph

Triumph Thunderbird Bedienungsanleitung

Yamaha

Yamaha 2006 FJR1300A Bedienungsanleitung