KUGOO KIRIN S1 Bedienungsanleitung
Thank you for purchasing KUOO KIRIN S1 Electric bicycle
In order to ensure safety of you and others, please read the instruction before you use it.
There might be slightly different between the product and the picture
Catalogue
1 Basic information
1.1 Important information
1.2 Safety warning
1.3 Scrap disposition
1.4 Product standard
2 Product introduction
2.1 Container loading list
2.2 Diagram of KUOO KIRIN S1
2.3 Button information
2.4 Display information
3 Fold and assemble the bicycle
3.1 Handlebars assemble
3.2 Support bicycle
3.3 Fold and unfold the bicycle
4 Battery charge
4.1 How to charge
4.2 Battery standard
5 Usage
5.1 Riding teaching
5.2 Practice guidelines
6 Cleaning and maintenance
6.1 Cleaning
6.2 Storing
6.3 Transport
7 maintaining
Chapter 1 Basic information
This instruction will tell you the function，usage and maintaining of the KUOO KIRIN S1. Please
prepare your purchase information before contacting the customer service ，because the
information is needed in this process.
Purchase Data
Bicycle code（on the bottom of the bicycle）
please obey the rules in this instruction
1.1 Important information
You must obey the law when you use the product. Customers have to admit the risk and
responsibilities. Limited to muscle injuries, fractures, lacerations, serious injuries and deaths, these
may be risks associated with the use of electric scooters.
In order to ensure your safety please read all the warnings in the instruction.
Make sure to wear the protective clothing (helmet, elbow pads, knee pads, etc.)
1.2 Safety warning
Safely dispose the package. It s dangerous for kids and pets
Checking the complete of the product, If any parts are missing, please contact the seller
If there is any damage，please don t use it
Use the right charger
look after your kid if they uses the product
Only use the components from our company
Be careful with the electricity. No water or liquid connected
Use a dry cloth to remove dust. Do not spray liquid onto product.
Do not immerse the product, any of its components or accessories in water
Do not use on the stairs
The bicycle could only take one person
Cover the product to prevent dust. Do not store it in a dusty environment, which may cause
damage.
Warning - fire hazard - user not maintainable
1.3 Scrap disposition
You could not burn it or berry it or drop it with the household garbage. If the battery is broken or
got fire, It will cause danger and environment pollution.You have to obey the laws and deposit it
carefully.
1.4 Product standard
Standard Component Parameters
Specification
Folded Size
960 x 210 x 330mm
Unfold Size
1050 x 450 x 1160mm
Net Weight
12.5kgs
product performance
Maximum load
100kgs
Gradeability
≤17°
Suitable terrain
Smooth road, slope less than 17°
Operating
temperature
25°C
storage
temperature
-10°C to 50°C
Speed and mileage
maximum
velocity
25 km / h
cruising distance
25km (load: 60kg)
Tyre
Front Tyre
8-inch cellular tires
Rear tire
8 "honeycomb motor tire
Battery
Parameter
Type
18650 Rechargeable lithium ions
Battery
protection type
Overcharge, over discharge, overheat automatically shut down
voltage and
current
36V 6Ah
Total Power
216Wh
Charger parameters
Model
42150
Input voltage
AC100-240V 50/60Hz 2A
output voltage
DC 42v 1.5a
Charging Time
4-5 Hours
2.1 Packing List
S1 bicycle x1
Internal hexagonal wrench x1
Charger x1
Instruction x1
Screw x4
2.2 Diagram of KUOO KIRIN S1
1. handle 11.screen
2.light 12 brake
3. shock absorption 13 power button
4. front mudguard 14.speed up finger
5.front fork 15 rear-wheel
6.front wheel 16.cover plate
7 power socket 17.fold button
8.petal 18 back light
9 back mudguard
10 foot stool
2.3 Button information
S1 have different parts of the screen, you have to know them before you ride
Power：3-5seconds to open or off
Control：you have to keep the speed for 6 seconds and press the button to cancel
Pattern：choose1 2 or 3
Light：Press three times quickly to switch between km/h or mp/h
2.4 Display information
Indicates the rest of the power
Indicates the speed. The readings are in km/h and mp/h
：Indicates the speed mode. Mode 1- white; Mode 2- orange; Pattern 3- red.
：Indicates when the controller is at high temperature.
：Indicates the status of the application, which is open/closed.
：Indicates the status of the headlights, i.e. on/off.
：Indicates an indicator status error, i.e. on/off.
if there is no power please stop and turn off the power.
3 Fold and assemble the bicycle
Please ensure that the S1 power is turned off before assembling the S1. Most of the parts have
been assembled before leave the factory.
A little assembly is required before the ride by you.
3.1 Handlebars assemble
Please use these 4 M5 screws to tighten before installing handlebars
Make sure the 4 screws are firmly fastened.
3.2 Support bicycle
1.find the support beside the petal
2.push the support down
3.3 Fold and unfold the bicycle
1.pull down the folding latch.Then push the stem down the pedal.
2.you have to make sure entirely fold or unfold
3 if you want to open it,Pull the stem up off the pedal, you will hear the sound, It means it's fully
expanded.Like the picture below
4. Battery charge
Please charge the scooter before use.
4.1 How to charge
1.turn off the power when you start to charge
2 find the socket
3.use the right charger
4.when it is charging the light will be red
5.Light will turn to green when charging completed.
If it is the first charge, please charge the scooter for at least 4 hours before use.
Under no circumstances should you use a scooter while charging.
Do not charge for longer than necessary.The standard charging time is about
3 hours (4ah battery).4.5 hours (6ah battery), 5.5 hours (7.5ah
battery).Charging too long can affect battery life and performance.
To extend battery life, charge it at least every three months.
4.2 Battery standard
Components Parameter
Type of the
battery
Rechargeable lithium ions
Charging time
4-5hours
voltage
36V
Capacity
6Ah
Weight
1.6KG
Size
340 * 75 * 42mm
operating
temperature
-10°C to 40°C
Charging
temperature
5°C to 45°C
storage
temperature
-20°C
至
50°C
KWh
216Wh
Protection
Overcharge, overdischarge, overheat automatically shut down
5 Usage
Before riding S1, please read the following information.
You have to wear the helmet or other protective clothing
Only 100Kg are allowed
Obey the local law
The S1 contains the motor, which may be classified as a motor vehicle according to
your local regulations.It is your responsibility to comply with local regulations.
Riding teaching
Suppose you are wearing appropriate protective gear and have placed your scooter on a level
road with sufficient power, follow these steps.
1. Keep one foot on the pedal and grab both handles
2. Put your other foot on the ground, push it back and start sliding.Use a handle to control.
3. Press the speed dial button to start riding.
4. If you want to stop, release the acceleration dial, then use the brake dial and gradually
slow down to a stop.Be very careful when you get off.
5. To turn off the scooter, hold down the power button for 3 to 5 seconds after full stop for
a few seconds.
5.1Practice guidelines
Please practice riding until you can easily use all scooter functions.See the tips below.
avoid passing through anything that will stick to the wheel or get stuck in/under the wheel.Wear
flat shoes for flexibility and stability.
Keep practising until you can easily get on , forward, turn, stop and get off.
S1 r can be ride on road with a 15 degree slope. But riding on the slopes is not recommended.
S1 applying for relatively flat terrain.
Do not ride on slopes, pedestrians or obstacles until you are proficient with the scooter.
The S1 weighs about 12.5 kg. Remember to fold the scooter before you pick
it up.
6.1Cleaning and maintenance
After long time riding, you have to clean it to ensure the product works well
Before cleaning, please make sure the scooter turn off
Use dry cloth to scrub it
Avoid contacting from liquid
Do not use alcohol and detergent
Do not spray the liquid directly on any part of the scooter.
6.2 Maintaining
To store S1, please follow the below information.
Please charge it before you store it
Charge it every 3 month
Cover S1 to prevent dust from entering.Do not store it in a dusty environment, which may cause
damage.
Don’t put it in unstable temperature, water or moisture can cause damage to batteries and
electrical circuits.
6.3 Transport
Close and fold the scooter before moving, lifting, or transporting it (see section 3.3 for
instructions).
When lifting the whole scooter, please note that the S1 weighs
about 12.35 kg.
Inhaltsverzeichnis
Andere KUGOO Fahrrad Handbücher
