KUHN Hector 3000 Bedienungsanleitung

KC0011GB C

Complementary instructions

Pneumatic precision seed drills

PLANTER \ MAXIMA

HECTOR 3000

KC0011GB C

- English - 10-2008

Dear Owner

PLANTER \ MAXIMA

HECTOR 3000

$DEAR OWNER

In buying a Kuhn machine you have chosen wisely. Into it have gone years of thought, research and

improvement. You will find, as have thousands of owners all over the world, that you have the best that

engineering skill and actual field testing can produce. You have purchased a dependable machine, but only

through proper care and operation can you expect to receive the performance and long service built into it.

This manual contains all the necessary information for you to receive full efficiency from your machine. The

performance you get from this machine is largely dependent on how well you read and understand this manual

and apply this knowledge. Please DO NOT ASSUME YOU KNOW HOW TO OPERATE AND MAINTAIN YOUR

MACHINE before reading this manual carefully. KEEP THIS MANUAL AVAILABLE FOR REFERENCE. Pass

it on to the next owner if you re-sell the machine.

Your KUHN dealer can offer a complete line of genuine KUHN service parts. These parts are manufactured and

carefully inspected in the same factory that builds the machine to assure high quality and accurate fitting of any

necessary replacements.

About improvements

We are continually striving to improve our products. It therefore reserves the right to make improvements or

changes when it becomes practical to do so, without incurring any obligations to make changes or additions to

the equipment sold previously.

PLANTER \ MAXIMA

HECTOR 3000

Contents

$CONTENTS

Dear Owner.....................................................................................................................1

Contents .........................................................................................................................2

Control box identification .............................................................................................4

Front view......................................................................................................................................... 4

Manufacturer's marking .................................................................................................................. 5

Safety..............................................................................................................................6

Description of symbols used in this document............................................................................ 6

Safety instructions........................................................................................................................... 7

Specifications.................................................................................................................9

Technical specifications ................................................................................................................. 9

Description of the box................................................................................................................... 10

Meaning of symbols ...................................................................................................................... 11

Description of the controls........................................................................................................... 11

Assembly and fitting....................................................................................................14

Description of the connection...................................................................................................... 14

Electrical diagrams........................................................................................................................ 16

Positioning and parking................................................................................................................ 17

Contents

PLANTER \ MAXIMA

HECTOR 3000

Putting into service......................................................................................................18

Switches on the control box......................................................................................................... 18

Machine use..................................................................................................................19

Adjustments before first use........................................................................................................ 19

Preliminary adjustments at work .................................................................................................22

Use during work............................................................................................................................. 26

Simple maintenance.....................................................................................................28

Sensor adjustment ........................................................................................................................ 28

Maintenance and storage ............................................................................................29

Limited warranty...........................................................................................................30

PLANTER \ MAXIMA

HECTOR 3000

Control box identification

$CONTROL BOX IDENTIFICATION

1. Front view

Control box identification

PLANTER \ MAXIMA

HECTOR 3000

2. Manufacturer's marking

Please note the serial number of your equipment. This

information is to be indicated to the dealer for all spare

parts orders.

Type:

Serial no.:

KUHN reference:

The software version: 2.2

PLANTER \ MAXIMA

HECTOR 3000

Safety

$SAFETY

1. Description of symbols used in this

document

This symbol indicates a potentially hazardous situation

that if not avoided, could result in serious bodily injury.

This symbol is used to identify special instructions or

procedures which, if not followed strictly, could result in

machinery damage.

This symbol is used to communicate technical

information of particular interest.

Safety

PLANTER \ MAXIMA

HECTOR 3000

2. Safety instructions

Read and follow the safety instructions

Before using the control box, carefully read all safety

instructions in this manual.

The operator must be familiar with all machine controls

and their respective functions. It is too late to learn once

work has been started!

Never let anyone operate the machine who is not trained

to do so.

Should you have any difficulties in understanding certain

parts in this manual, please contact your KUHN dealer.

Precautions to take before using the

control box

Place the control box so that it cannot interfere with other

tractor controls and be activated inadvertently.

Before switching the control box on, check that nobody

is within the machine pivoting area: switching on the

control box can activate functions on the machine.

Precautions to take when using the control

box

Do not operate the control box while a person is carrying

out work on the machine.

Switch off control box before carrying out any

maintenance or repair work on the machine.

Introduction

The operator must follow the safety instructions in this manual and in the machine's operator's manual as well

as respect the warnings posted on the machine.

PLANTER \ MAXIMA

HECTOR 3000

Safety

Precautions when driving

Before transporting the machine on public roads, make

sure no function of the control box or of the control

accessories can be switched on inadvertently. Make

sure tractor valves and power take-off are deactivated

and not inadvertently engaged.

Andere Handbücher für Hector 3000

Inhaltsverzeichnis

Andere KUHN Bedienfeld Handbücher

KUHN

KUHN Quantron S Bedienungsanleitung

Beliebte Bedienfeld Handbücher anderer Marken

RDZ

RDZ PC-HRX Bedienungsanleitung

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Technisches Handbuch

Efka

Efka Variocontrol V810 Bedienungsanleitung

Cebora

Cebora 208-10 Bedienungsanleitung

AMX

AMX AutoPatch CP-15 Bedienungsanleitung

Satel

Satel CA-6 KLED-S Bedienungsanleitung

Evolution

Evolution IQ plus 800 Bedienungsanleitung

Fagor

Fagor 8040 TCO CNC Bedienungsanleitung

AKO

AKO PROCool AKO-17635-2 Bedienungsanleitung

ABB

ABB 6136/30M-101 Bedienungsanleitung

Telikou

Telikou BK-603 Belt Pack Bedienungsanleitung

Mapei

Mapei Mapeheat Thermo Touch Bedienungsanleitung

Bosch

Bosch D9412GV4 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Bedienungsanleitung

Sminn

Sminn BOX L VF1L EI Bedienungsanleitung

Balboa

Balboa TP600 Bedienungsanleitung

Nice

Nice HSCU1 Technische Daten

Truma

Truma CP plus Bedienungsanleitung