Kuka LBR iisy Bedienungsanleitung
LBRiisy
Quick Setup Guide
Leaving the LBR iisy robotic arm in the box, remove
all other components, accessories and cables.
Unbox all components
except the robot
01
1.1 Take o the lid
1.2 Remove the sides of the box
(two parts) and the cover layer
1.3 Leave the LBR iisy
robot in the box.
Take out everything else.
The letters on this pages correspond to the letters in a later step
when connecting cables to the controller and power supply.
Important note. Depending on your configuration, the box
may include additional accessories, components or cables that
are not listed here.
KRC5micro power cable
Grounding wire
smartPADpro and cable KRC5micro robot controller
Connection cable set
(engine cable & data cable)
Check
contents of the box
02
4x
Transport and mount
LBRiisy
03
3.1 Prepare for transport
Tighten a sling around axis 3 (A3) of the
LBR iisy robotic arm. Lift the robot from
the holder into the upright position.
Alternative: To move the robot by hand,
grab the LBR iisy by the highlighted
positions.
Two people are required
for this option.
4.1 Mounting
Follow the safety instructions and
mounting patterns included in the
LBR iisy documentation. To access this
documentation, log in to Xpert
by scanning the QR code below. The
mounting pattern is also shown here
to the left.
3.3 Hoist transport
Use a hoist to transport the LBR iisy to
its final installation location.
Keep the robot inside the sling until
it is mounted completely.
3.2 Lift up slowly
Use a hoist to lift up the robot from the
horizontal position and remove the
packaging material.
Connect
all cables
04
There are three wires that need to be connected
between the LBR iisy and the KR C5 micro controller.
Additionally, the smartPAD Pro and the power cable
have to be connected to the KR C5 controller.
Frontside
smartPADPro cable
Grounding wire
Data cable (XF 21 to XF 31)
Take care of proper interlock
Engine cable (XD20.1 and XD20.2 to XD 80)
XF
74
XG
76
XD
70
XD
30
XF 31
XD 80
Backside
Power switch
KRC5micro power cable
Mount the end
of arm tooling
Done!
Additional
iiQKA Resources
05 06
07
Please mount your tool to the flange of
the LBR iisy according to individual spec-
ifications. Depending on the tool used,
you can download a toolbox from the
iiQKA ecosystem or configure your tool
manually inside the iiQKA user interface.
For more details about this process,
please scan the QR code.
Safety Notice. The robot is equipped with a basic
safety configuration which is out of the box func-
tional. Additional functions, e.g. collision detection
or reaction in free space or clamping situations
need to be configured.
In order to operate the system safely, setup your
safety configuration in a way that ensures the safe-
ty of people and property. If you do not know how
to ensure the safe operation of the robot please
contact for help.
Ensure all cables are connected
properly before pressing the
power button on the KR C5
micro controller.
iiQKA User Forum
*requires registration
with an account on
my.kuka
iiQKA Ecosystem
Marketplace
iiQKA Help Portal
on Xpert*
MA|iiQKA Quick Setup Guide|EN|02|1222
www.kuka.com
Details provided about the properties and usability of the products are purely for information purposes and do not constitute
a guarantee of these characteristics. The extent of goods delivered is determined by the subject matter of the specific contract.
No liability accepted for errors or omissions. Subject to alterations. © 2022
youtube.com/kukarobotgroup
facebook.com/kukaglobal
twitter.com/kukaglobal
linkedin.com/company/kukaglobal
kuka.com/contacts
Andere Kuka Robotik Handbücher
Kuka
Kuka ready2 educate Bedienungsanleitung
Kuka
Kuka Pulse Installationsanleitung
Kuka
Kuka KR 30-2 Bedienungsanleitung
Kuka
Kuka KR 300-2 PA Bedienungsanleitung
Kuka
Kuka KR C2 Bedienungsanleitung
Kuka
Kuka KR 350 Leitfaden
Kuka
Kuka KR 30-3 Betriebsanleitung
Kuka
Kuka VisionTech 2.1 Bedienungsanleitung
Kuka
Kuka KUKA.EthernetKRL 2.2 Bedienungsanleitung
Kuka
Kuka KR QUANTEC extra Bedienungsanleitung
Beliebte Robotik Handbücher anderer Marken
STEMCenter USA
STEMCenter USA Pi-Bot v2.00 Bedienungsanleitung
SunFounder
SunFounder PiDog Bedienungsanleitung
Universal Robots
Universal Robots UR5 Bedienungsanleitung
Universal Robots
Universal Robots E Series Bedienungsanleitung
YASKAWA
YASKAWA MOTOMAN-MPL80 II Bedienungsanleitung
EFORT
EFORT ECR5 Gebrauchsanweisung
