Kuryakyn 4261 Bedienungsanleitung

PARTS INCLUDED

1 License Plate Flag Mount

1 Flag Mount Filler Disk

1 Flag Pole Assembly

1 Spring

1 Threaded Flag Pole Tip

1 American Flag

2 10-32 x 5/8" Socket Head Cap Screws

4 1/4-20 x 3/4" Button Socket Cap Screws

4 1/4" Flat Washers

4 1/4" Nylon Locking Nuts

1 Installation Instructions

Please read and understand entire instructions before starting installation.

THANK YOU FOR CHOOSING KÜRYAKYN!

IN ORDER TO PROTECT YOU AND OTHERS FROM POSSIBLE INJURY

AND/OR PROPERTY DAMAGE OR LOSS, PLEASE PAY CLOSE ATTENTION

TO ALL INSTRUCTIONS, WARNINGS, CAUTIONS AND ATTENTION NOTES

REGARDING THE USE AND CARE OF THIS PRODUCT.

WARNING! THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE

CONTENTS DESCRIBED HEREIN CAN RESULT IN POTENTIAL DEATH OR

SERIOUS INJURY.

CAUTION! This indication alerts you to the fact that ignoring the contents described herein

can result in potential injury or material damage.

ATTENTION!

This indication alerts you to the fact that ignoring the contents described herein

may negatively affect product performance and functionality.

TOOLS SUGGESTED

Set of Hex Wrenches, Combination Wrenches

STRICTLY OBSERVE THE FOLLOWING GUIDELINES IN ORDER TO USE THE

PRODUCT PROPERLY AND AVOID POTENTIALLY DANGEROUS ACCIDENTS.

PROCEDURE

STEP 1 Read and understand all steps in the

instructions before starting the installation. Park the

motorcycle on a hard, level surface; turn off the

ignition and allow the engine to cool.

STEP 2 As shown in PIC 1, hold the flag mount

filler disk in place on the flag pole assembly.

STEP 3 As shown in PIC 2, attach the assembly

from Step 2 to the chrome license plate flag mount

using the 10-32 x 5/8" Socket Head Cap Screws.

Tighten the screws.

4261-11MC-0610

LICENSE PLATE MOUNTED FLAG 4261

-cont.-

PIC. 1

FILLER DISK

INSTALLATION

PAGE

FLAG MOUNT

STEP 4 Remove the stock license plate from the stock mount.

STEP 5 Place the new flag pole and backing plate assembly between the license plate and stock

mount.

STEP 6 Secure in place using the 1/4" hardware.

STEP 7 To remove, or replace the flag, unscrew the tip of the flag pole and remove the flag. Install

the new flag and tighten the tip.

ATTENTION!

It is the installer’s responsibility to ensure that all of the fasteners (including pre-

assembled) are tightened before operation of the motorcycle. Küryakyn will not warranty

components lost due to improper installation. Periodic maintenance may be required.

PIC. 2

Inhaltsverzeichnis

Andere Kuryakyn Motorradzubehör Handbücher

Kuryakyn

Kuryakyn 4141 Bedienungsanleitung

Kuryakyn

Kuryakyn 1558 Bedienungsanleitung

Kuryakyn

Kuryakyn 6745 Bedienungsanleitung

Kuryakyn

Kuryakyn 5062 Bedienungsanleitung

Kuryakyn

Kuryakyn 2257 Bedienungsanleitung

Kuryakyn

Kuryakyn 8446 Bedienungsanleitung

Kuryakyn

Kuryakyn XKURSION XS DEPOT BAG Bedienungsanleitung

Kuryakyn

Kuryakyn 3225 Bedienungsanleitung

Kuryakyn

Kuryakyn 7151 Bedienungsanleitung

Kuryakyn

Kuryakyn 7925 Bedienungsanleitung

Kuryakyn

Kuryakyn XKURSION XW PORTER BAG Bedienungsanleitung

Kuryakyn

Kuryakyn 7529 Bedienungsanleitung

Kuryakyn

Kuryakyn 4445 Bedienungsanleitung

Kuryakyn

Kuryakyn 4859 Bedienungs- und Wartungsanleitung

Kuryakyn

Kuryakyn 4767 Bedienungsanleitung

Kuryakyn

Kuryakyn 9931 Service-Handbuch

Kuryakyn

Kuryakyn Pakmaster 444168 Bedienungsanleitung

Kuryakyn

Kuryakyn 5455 Bedienungsanleitung

Kuryakyn

Kuryakyn 1667 Bedienungsanleitung

Kuryakyn

Kuryakyn 4139 Bedienungsanleitung

Kuryakyn

Kuryakyn 3765 Bedienungsanleitung

Kuryakyn

Kuryakyn 8617 Bedienungsanleitung

Kuryakyn

Kuryakyn 3181 Bedienungsanleitung

Kuryakyn

Kuryakyn 1198 Service-Handbuch

Beliebte Motorradzubehör Handbücher anderer Marken

SRC

SRC B-TRK502-01-01-SL Bedienungsanleitung

3M Speedglas 9100 MP Bedienungsanleitung

hepco & becker

hepco & becker 6307520 00 01 Bedienungsanleitung

HOMCOM

HOMCOM AA0-077 Bedienungsanleitung

hepco & becker

hepco & becker 6307558 00 01 Bedienungsanleitung

Wunderkind Custom

Wunderkind Custom 106503-F15 Benutzerhandbuch

Dräger

Dräger HPS 3500 Bedienungsanleitung

M-WAVE

M-WAVE SKI Bedienungsanleitung

hepco & becker

hepco & becker 6507504 00 01 Bedienungsanleitung

Tool it

Tool it PROMAX LCD 9.13G Bedienungsanleitung

Custom Dynamics

Custom Dynamics TruWrapz Bedienungsanleitung

Roof

Roof RO200 CARBON Bedienungsanleitung

Kabuto

Kabuto Japan IBUKI Bedienungsanleitung

PUIG

PUIG 5051 Bedienungsanleitung

rizoma

rizoma ZTH050 Bedienungsanleitung

Joubert

Joubert 10001711 Bedienungsanleitung

Sperian

Sperian Optrel p420 Bedienungsanleitung

SW-Motech

SW-Motech SBL.01.971.10000/B Bedienungsanleitung