Kuryakyn 7151 Bedienungsanleitung

PAGE 1

307151

DPF-MRK-003 REV A 3/21/18

LUGGAGE RACK FOR GL1800, CHROME 7151

866 277 9598 | INFO@KURYAKYN.COM

454 COUNTY ROAD VV SOMERSET, WI 54025

KURYAKYN.COM

INSTALLATION INSTRUCTIONS

THANK YOU FOR CHOOSING KURYAKYN!

Protect yourself and others from possible injury and property damage or loss. Pay close attention to all instructions, warnings, cautions, and notices regarding the installation, use, and care of this product.

THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE CONTENTS DESCRIBED HEREIN CAN RESULT IN POTENTIAL DEATH OR SERIOUS INJURY.

THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE CONTENTS DESCRIBED HEREIN CAN RESULT IN MINOR OR MODERATE POTENTIAL INJURY.

THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE CONTENTS DESCRIBED HEREIN MAY NEGATIVELY AFFECT PRODUCT PERFORMANCE AND FUNCTIONALITY OR

DAMAGE THE PRODUCT ITSELF OR THE PRODUCT TO WHICH IT IS BEING ATTACHED.

ENSURE THAT THE FOLLOWING PARTS HAVE BEEN INCLUDED IN THE KIT:

1Luggage Rack with Rubber Insert 1Hardware Kit, containing: - CONTINUED -

Hardware Kit, containing: 2#10–24 x 1” Button Head Cap Screws

4Cup washers 2#10–24 x 1-1/4” Button Head Cap Screws

2Rubber Spacers with Adhesive Back 41/4” Flat Washer

8Rubber washers

YOU WILL ALSO NEED:

Set of Hex Wrenches, Drill and Drill Bits, Masking Tape, and a Marker or Pen

THESE INSTALLATION INSTRUCTIONS CONTAIN IMPORTANT INFORMATION. ENSURE THE END USER RECEIVES THIS COPY AND IS AWARE

OF ITS IMPORTANCE FOR FUTURE USE.

STEP 1 Read and understand all steps in the instructions before starting the

installation. Park the motorcycle on a hard, level surface and turn off

the ignition. Let motorcycle cool.

STEP 2 Without letting the Luggage Rack contact the Trunk Lid, hold it in

the approximate mounting location. Place masking tape on the top

(painted) surface of the trunk lid in the location of the luggage rack

legs to prevent scratching.

MEASURE TWICE – DRILL ONCE. DOUBLE CHECK ALL REFERENCE

MARKS MADE ON THE TRUNK LID BEFORE DRILLING. KURYAKYN WILL

NOT BE RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES

RESULTING FROM THIS INSTALLATION.

STEP 3 Align and place the luggage rack on top of the tour box, with the legs

resting on top of the taped areas. Trace the location of the legs on the

tape. Carefully mark the center of your tracings.

STEP 4 Double check to be certain the rack is centered in the position you

desire.

STEP 5 FOR ‘01-’17 MODELS ONLY

On the inside of the tour box, remove the hardware and inner surface

from the top lid.

FOR ‘18+ MODELS

Continue to Step 6.

PIC 1

RUBBER

WASHER

CUP

WASHERS

FLAT

WASHER

1.25”

SCREW

1”

SCREW

RUBBER

SPACERS

WITH

ADHESIVE

PAGE 2

307151

DPF-MRK-003 REV A 3/21/18

LUGGAGE RACK FOR GL1800, CHROME 7151

866 277 9598 | INFO@KURYAKYN.COM

454 COUNTY ROAD VV SOMERSET, WI 54025

KURYAKYN.COM

INSTALLATION INSTRUCTIONS

-CONTINUED-

STEP 6 On the outside of the trunk lid, carefully drill a 1/4” hole at the center

of the marked locations. Remove masking tape from around the

mounting holes.

Tip: You may want to drill a smaller diameter pilot hole ﬁrst. This will

lessen the chance of the drill “walking” and harming the ﬁnish. While

drilling the rear holes, try to match the angle of the rear mounting legs.

STEP 7 Locate provided two (2) cup washers, four (4) rubber washers, (2) ﬂat

washers, and two (2) 10-24 x 1” Button Head Cap Screws. Place a ﬂat

washer followed by a rubber washer onto each of the screws.

STEP 8 Refer to PIC 2 and 3. From the inside of the lid insert the screw washer

assembly through the front mounting hole. On the outside of the

lid, place a rubber washer followed by the cupped washer onto the

protruding screw. Align the rack’s front foot with the hardware and

fasten it to the lid. Fully tighten hardware, but do not overtighten.

STEP 9 FOR ‘01’-’17 MODELS ONLY

Locate provided two (2) rubber spacers with adhesive backing. Remove

the backing from the spacers. From the inside of the trunk lid, align

and place the spacers over the REAR drilled mounting holes. Reinstall

the inner surface of the trunk lid in the reverse order of which it was

removed in Step 5.

FOR ‘18+ MODELS

Proceed to Step 10.

STEP 10 Locate provided two (2) cup washers, four (4) rubber washers, (2) ﬂat

washers, and two (2) 10-24 x 1-1/4” Button Head Cap Screws. Place a

ﬂat washer followed by a rubber washer onto each of the screws.

STEP 11 From the inside of the lid insert the screw washer assembly through the

rear mounting hole. On the outside of the lid, place a rubber washer

followed by the cupped washer onto the protruding screw. Align the

rack’s rear foot with the hardware and fasten it to the lid. Fully tighten

hardware, but do not overtighten.

NEVER EXCEED THE MANUFACTURER’S RECOMMENDED LOAD CAPACITY.

EXCESS LOADING ON THE LUGGAGE RACK COULD CAUSE DAMAGE TO

YOUR MOTORCYCLE, LOSS OR INJURY. KURYAKYN IS NOT RESPONSIBLE

FOR ANY DAMAGE, LOSS, OR INJURY CAUSED BY EXCEEDING THE

MANUFACTURER’S LOAD CAPACITY.

IT IS THE INSTALLER’S RESPONSIBILITY TO ENSURE THAT ALL OF THE

FASTENERS (INCLUDING PRE-ASSEMBLED) ARE TIGHTENED BEFORE

OPERATION OF THE MOTORCYCLE. KURYAKYN WILL NOT PROVIDE

WARRANTY COVERAGE ON PRODUCTS OR COMPONENTS LOST DUE

TO IMPROPER INSTALLATION OR LACK OF MAINTENANCE. PERIODIC

INSPECTION AND MAINTENANCE ARE REQUIRED ON ALL FASTENERS.

RUBBER

WASHER

RUBBER

WASHER

TRUNK LID

INSIDE TRUNK LID OUTSIDE TRUNK LID

CUP

WASHERS

FLAT

WASHER

BHCS

PIC 2

PIC 3

PAGE 3

307151

DPF-MRK-003 REV A 3/21/18

LUGGAGE RACK FOR GL1800, CHROME 7151

866 277 9598 | INFO@KURYAKYN.COM

454 COUNTY ROAD VV SOMERSET, WI 54025

KURYAKYN.COM

INSTALLATION INSTRUCTIONS

-CONTINUED-

LIMITED WARRANTY

Kuryakyn warrants that any Kuryakyn products sold hereunder, shall be free of defects in materials & workmanship for a period of one (1) year from the date of

purchase by the consumer excepting the following provisions:

1. Kuryakyn shall have no obligation in the event the customer is unable to provide a receipt showing the date the customer purchased the product(s).

2. The product must be properly installed, maintained & operated under normal conditions.

3. Kuryakyn shall not be liable for any consequential & incidental damages, including labor & paint, resulting from failure of a Kuryakyn product, failure to deliver, delay

in delivery, delivery in nonconforming condition, or for any breach of contract or duty between Kuryakyn & a customer.

4. Kuryakyn products are often intended for use in speciﬁc applications. Kuryakyn makes no warranty if a Kuryakyn product is used in applications other than intended.

5. Kuryakyn electrical products are warranted for one (1) year from the date of purchase by the consumer. L.E.D.’s contained in components of Kuryakyn products will

be warranted for defects in materials & workmanship for 3 years from the date of purchase whereas all other components shall be warranted for one (1) year.

6. All warranty claims must be directed to the place of purchase. Merchandise sold through internet auction sites or any other unauthorized reseller shall not carry a

Kuryakyn warranty. If unsure, please contact the place of purchase to verify they are an authorized Kuryakyn reseller.

RETURN POLICY

Merchandise determined to be defective may be returned up to one year from the date of purchase. Returns must be processed through original seller. Returned

merchandise for any other reason other than warranty claims must be in like new condition & subject to a 20% restocking fee. All returns are subject to inspection

for determination of full or partial credit. Any returned part that shows evidence of being used or installed contrary to manufacturer’s instructions, &/or subjected to

improper handling, packaging or return shipping by the customer, will not be eligible for exchange, refund or warranty consideration. All returned electrical items will be

inspected & tested. If electrical item is deemed functional, no credit will be issued & item will be returned. All sales are ﬁnal on discontinued or closeout merchandise.

KURYAKYN, KURYAKYN K logo and the marks appearing on this instruction sheet are registered and common law trademarks of Kuryakyn Holdings except noted third-party trademarks. A full listing of trademarks and trademark

registrations owned by Kuryakyn Holdings can be found at www.kuryakyn.com/legal-notice.

Emissions Notice: The California Air Resources Board (CARB) does not permit the use of aftermarket emission-related parts(s) that alter the performance of OEM emission-related devices unless CARB has issued an Executive

Order, other than on racing vehicles on closed courses. Check your local laws and manufacturer’s information.

Listed Manufacturers and product model names are for reference only. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any afﬁliation with or

endorsement by them. All speciﬁcations are subject to change without notice.

For additional information on third-party product and company names, please consult our Web page at www.kuryakyn.com/legal-notice

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kuryakyn Motorradzubehör Handbücher

Kuryakyn

Kuryakyn 4162 Bedienungsanleitung

Kuryakyn

Kuryakyn MOMENTUM RAMBLER ROLL BAG Bedienungsanleitung

Kuryakyn

Kuryakyn MOMENTUM DEADBEAT DUFFLE BAG Bedienungsanleitung

Kuryakyn

Kuryakyn 4139 Bedienungsanleitung

Kuryakyn

Kuryakyn 3225 Bedienungsanleitung

Kuryakyn

Kuryakyn 4247 Bedienungsanleitung

Kuryakyn

Kuryakyn 7158 Bedienungsanleitung

Kuryakyn

Kuryakyn XKURSION XW PORTER BAG Bedienungsanleitung

Kuryakyn

Kuryakyn 8446 Bedienungsanleitung

Kuryakyn

Kuryakyn 9931 Service-Handbuch

Kuryakyn

Kuryakyn 5496 Bedienungsanleitung

Kuryakyn

Kuryakyn 1667 Bedienungsanleitung

Kuryakyn

Kuryakyn 1558 Bedienungsanleitung

Kuryakyn

Kuryakyn 1796 Bedienungsanleitung

Kuryakyn

Kuryakyn 1198 Service-Handbuch

Kuryakyn

Kuryakyn 7312 Bedienungsanleitung

Kuryakyn

Kuryakyn XKURSION XS DEPOT BAG Bedienungsanleitung

Kuryakyn

Kuryakyn MOMENTUM ROAMER TAIL BAG Bedienungsanleitung

Kuryakyn

Kuryakyn Pakmaster 444168 Bedienungsanleitung

Kuryakyn

Kuryakyn 1186 Bedienungsanleitung

Kuryakyn

Kuryakyn ISO-SweptWing 4463 Bedienungsanleitung

Kuryakyn

Kuryakyn 4141 Bedienungsanleitung

Kuryakyn

Kuryakyn 4143 Bedienungsanleitung

Kuryakyn

Kuryakyn 2257 Bedienungsanleitung

Beliebte Motorradzubehör Handbücher anderer Marken

SRC

SRC B-TRK502-01-01-SL Bedienungsanleitung

3M Speedglas 9100 MP Bedienungsanleitung

hepco & becker

hepco & becker 6307520 00 01 Bedienungsanleitung

HOMCOM

HOMCOM AA0-077 Bedienungsanleitung

hepco & becker

hepco & becker 6307558 00 01 Bedienungsanleitung

Wunderkind Custom

Wunderkind Custom 106503-F15 Benutzerhandbuch

Dräger

Dräger HPS 3500 Bedienungsanleitung

M-WAVE

M-WAVE SKI Bedienungsanleitung

hepco & becker

hepco & becker 6507504 00 01 Bedienungsanleitung

Tool it

Tool it PROMAX LCD 9.13G Bedienungsanleitung

Custom Dynamics

Custom Dynamics TruWrapz Bedienungsanleitung

Roof

Roof RO200 CARBON Bedienungsanleitung

Kabuto

Kabuto Japan IBUKI Bedienungsanleitung

PUIG

PUIG 5051 Bedienungsanleitung

rizoma

rizoma ZTH050 Bedienungsanleitung

Joubert

Joubert 10001711 Bedienungsanleitung

Sperian

Sperian Optrel p420 Bedienungsanleitung

SW-Motech

SW-Motech SBL.01.971.10000/B Bedienungsanleitung