Kustom Signals ProLaser 4 Bedienungsanleitung

The menu button accesses the following settings or modes:

ProLaser 4 Quick Reference Guide

RCMPConfiguration

Head-Up Display

6 ProLaser 4 Menus

Distance

Sets min/max range limits to target vehicle for school

and work zone enforcement. Fire the LASER at the

desired target or use up/down arrows to enter values.

Press enter to set min/max ranges. Any target measured

outside the range limits will not be displayed.

Set Direction Sets target direction discrimination to Approaching

only,

Receding only, or Both.

DIF-TEST Two-target, differential distance accuracy test mode.

Continuous/

Single

Sets enforcement mode to continuous target

measurement or single shot mode (option).

Units Select between mph/km/h; mph/knots; or km/h/knots (option).

HUD

Options

Toggle Range in HUD on/off. Select from four aiming

reticles.

Events Displays last 100 locked targets with Speed, Range

and Direction with date and time stamp.

Set

Time/Date Set date and time in 24 hour format (option).

Stopwatch Average speed over distance enforcement mode (option).

Self-Test Press the test button to run internal accuracy tests.

HUD Alignment

Test

Place the ProLaser 4 in range mode. Select an isolated

target ~100 feet away and sweep HUD horizontally and

vertically across target. Listen for audio tone and verify

aiming reticle on target coincides with tone and range

measurement in HUD.

Differential

Distance Test

Select two targets ~ 50 and 100 feet away. Target each

when prompted and verify range accuracy.

KSI p/n 006-0966-12 Rev 3

(800)4KUSTOM

(800) 458-7866

www.kustomsignals.com

Single Press Press and Hold

Rear Display Brightness Power On/Off

HUD Brightness

(Poor Weather in Menu) Poor Weather Mode

Menu 

Mode

Up (In Menu) Receding Only Targets

Volume

Down (In Menu) Approaching Only Targets

Display Lock

(Enter button in Menu)

Mark Select Events (Option)

Self-Test

Install 4-AA batteries in the Battery Compartment, or plug in USB.

Press and hold the power button to power on/off.

Hold the unit by the handle and aim with the HUD with both eyes open.

Press and hold the trigger to fire the laser.

Place the aiming reticle on the target vehicle. Continue target tracking

through the HUD.

While holding trigger down, Speed and Range continually update in the

HUD and on the rear display.

Audio tones provide targeting feedback. A solid tone indicates target

successfully acquired.

Release the trigger to lock the measurement in the HUD and rear panel

display.

The ProLaser 4 will enter (default) sleep mode after two (2) minutes, and

will power down after 15 minutes. Sleep timers are user adjustable.

Press the Menu button.

Navigate to and select Events.

Use the up/down buttons to scroll through up to 100 previous

measurements on the rear panel.

Each event will list the date, time, target direction, target

speed, and target range when the target was locked.

ProLaser 4 allows the user to download measurements over the USB to a

spreadsheet using a PC utility. The utility may be downloaded from the

Kustom website from the ProLaser 4 product and Service pages.

The Events data includes Speed & Range measurements with date &

time,

units, tracking history time, and serial number as shown below.

Date Time Speed Units Range Units Track Units S/N

15/2/2022 12:39:41 120 kmh 150 m 3.6 sec 2155

15/2/2022 12:39:11 95 kmh 350 m 1.7 sec 2155

15/2/2022 12:38:47 88 kmh 150 m 15.1 sec 2155

15/2/2022 12:38:14 127 kmh 470 m 12 sec 2155

15/2/2022 12:37:48 94 kmh 480 m 0.7 sec 2155

15/2/2022 12:36:39 87 kmh 482 m 2.3 sec 2155

15/2/2022 12:36:16 115 kmh 120 m 5.9 sec 2155

15/2/2022 12:15:42 189 kmh 150 m 4.2 sec 2155

Andere Kustom Signals Radar Handbücher

Kustom Signals

Kustom Signals HR-12 Bedienungsanleitung

Kustom Signals

Kustom Signals Falcon HR Bedienungsanleitung

Kustom Signals

Kustom Signals Talon Radar Bedienungsanleitung

Kustom Signals

Kustom Signals Ontario Falcon HR Bedienungsanleitung

Kustom Signals

Kustom Signals Directional Golden Eagle II Bedienungsanleitung

Kustom Signals

Kustom Signals Pro-Lite Bedienungsanleitung

Kustom Signals

Kustom Signals Eagle 3 Bedienungsanleitung

Kustom Signals

Kustom Signals PMD 250 Bedienungsanleitung

Kustom Signals

Kustom Signals Pro-Lite + Bedienungsanleitung

Kustom Signals

Kustom Signals RD-24 SERIES Bedienungsanleitung

Kustom Signals

Kustom Signals DRU III Bedienungsanleitung

Kustom Signals

Kustom Signals Raptor RP-1 Bedienungsanleitung

Kustom Signals

Kustom Signals EAGLE II Bedienungsanleitung

Kustom Signals

Kustom Signals Eagle 3 Bedienungsanleitung

Kustom Signals

Kustom Signals ProLaser III Bedienungsanleitung

Kustom Signals

Kustom Signals Eagle 3 North Carolina Bedienungsanleitung

Kustom Signals

Kustom Signals Golden Eagle II Bedienungsanleitung

Kustom Signals

Kustom Signals Falcon HR Bedienungsanleitung

Beliebte Radar Handbücher anderer Marken

SAW D2L

SAW D2L Valentine One Gen2 Bedienungsanleitung

Raymarine

Raymarine Raytheon R20X Bedienungsanleitung

Simrad

Simrad CA34 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot FMR67B Technische Daten

Endress+Hauser

Endress+Hauser Levelflex M FMP45 Bedienungsanleitung

ECHOMAX

ECHOMAX Active-X-Band Bedienungsanleitung

AGD

AGD 340 Bedienungsanleitung

SYMEO

SYMEO STU Bedienungsanleitung

Axis

Axis D2110-VE Bedienungsanleitung

MALA

MALA MIRA Bedienungsanleitung

Emerson

Emerson ROSEMOUNT 5300 Bedienungsanleitung

Rosemount

Rosemount 5300 Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex FMP56 Technische Daten

TERMA

TERMA SCANTER 5102 Bedienungsanleitung

GSSI

GSSI UtilityScan Bedienungsanleitung

Acconeer

Acconeer A111 Bedienungsanleitung

Crosley

Crosley CR37 Bedienungsanleitung

AGD

AGD 318 Bedienungsanleitung