KV2 Audio VHD5000 Bedienungsanleitung

User Guide

VHD5000 GUI

Touchscreen Control,

Web Control

This User Guide shows how to Control the VHD5 system using

the VHD5000 amplier Touchscreen control system, and/or Web

control using a web browser.

Contents

VHD5000 GUI · Contents

VHD5000 GUI

Introduction 2

Touchscreen Control System 3

Amplier Settings 4 - 9

Flybar 10

Diagnostics 11

Generator 12

Ethernet 13

Basic controls · Keyboard window 14

Bottom menu 15 - 17

K-NET 18 - 22

VHD5000 GUI · Web Control 23

Remote Control System 24 - 26

Settings 27 - 32

Preset 33

Diagnostics 34

Network 35

Keyboard 36

Ethernet 37

Device Setup 38 - 39

K-NET 40 - 41

Notes 42 - 44

VHD5000 GUI · Introduction

This page has a side menu (A) and a bottom menu (B).

To navigate in the application you can use the touch screen or the encoder. Turn the encoder left or right to focus,

action depending on the button type, (which will be explained below).

VHD5000 Introduction

On the front panel of the VHD5000 amplier is a 3.7"Color Transreective LCD touch display, a standby button

and a rotary encoder with a push-button function for controlling the system. After powering on, the VHD5000 will

display the KV2 logo until it has completed booting up.

Once the amp has booted, it will then change to the system overview screen. (Pic 1)

Pic 1

Pic 2

VHD5000 GUI · Introduction

VHD5000 GUI · Touchscreen Control System

Touchscreen Control System

Use the side menu to switch between the four main tabs.

Pic 3: LIST - System settings overview Pic 4: SET - Amplier settings, ybar control

Pic 5: DIA - diagnostics, signal generator, software version Pic 6: NET - network connection

(A) Home

(B) "AMP" - device setup

(D) K-NET - remote control of ampliers and group management

The bottom menu of the overview page contains four button options (see page 17):

Pic 7

A B C D

VHD5000 GUI · Touchscreen Control Systems

VHD5000 GUI · Amplier Settings

Amplier Settings

Setting

The LIST tab provides a view of the whole amplier setup. Each amplier channel has a box with its settings.

On Pic 8 you can see the system default values. Pic 9 shows a custom user setting. Muted channels are

shown with a red line through the band, and the text is grayed out.

wSUB-INT/EXT = Internal or external sub input, LD EQ = long distance equalizer for HF band.

When cardioid SUB mode is set, there is only one row for the SUBS - SUB CARDIOID

This screen also shows all of the other system settings; PHASE, GAIN, INPUT IMPEDANCE, SYSTEM DELAY, etc.

The SIGNAL METER (Pic 3) shows input level from -21 to +9dB with a 1sec peak as well as the SIGnal and LIMiter

indicators. The SIGNAL METER is included in the LIST, SETting and DIAgnostic tabs.

In the SETting tab (Pic 11) you can manage the amplier settings.

INPUT, LOW, MID, HI, SUB A, SUB B (or one button for SUB CARDIOID) and FILL buttons represent individual channels.

Press the channel button to open a window showing the advanced settings (except the MID channel which can only

be muted. This is because the MID band is treated as the baseline for the system and the other bands are gained

against the MIDS). Press and hold the channel button to mute or unmute each channel. A Red cross-hatch indicates

that the channel is muted (Pic 12). The LOW and HI bands have A and B channels which can be muted in the advanced

settings window. The MUTE button opens a window where you can mute output channels or unmute all channels.

The RESET button opens a window where you can conrm if you want to reset amplier settings to default. The Button

for controlling the FLYBAR is enabled when the VHD5.0 speaker multi-cable & ybar POWER UNIT is connected.

Pic 8 Pic 9

Pic 11 Pic 12

Pic 10

VHD5000 GUI · Amplier Settings

Input

Press the INPUT button to open the advanced settings window (Pic 13)

Press X, or touch anywhere outside the window (gray zone) to close the window.

Specication table

UNMUTE/MUTE

LEVEL: -20, -19, -18, -17, -16, -15, -14, -13, -12, -11, -10, -9, -8.5,

-8, -7.5, -7, -6.5, -6, -5.5, -5, -4.5, -4, -3.5, -3, -2.5, -2, -1.5, -1, -0.5,

0, 0.5, 1, 1.5, 2, 2.5, 3 dB

PHASE: 0°, 180°

IMPEDANCE: 120Ω, 10kΩ

FULL RANGE: ON/OFF

SUB INPUT: INTERNAL, EXTERNAL

CARDIOID: ON/OFF

INSERT: ON/OFF

enabled if SUB INPUT: INTERNAL DELAY - TIME: 0 - 379ms,

0.05ms step;

DISTANCE: 0 - 130m, cca 0.02m step

Buttons description:

UNMUTE/MUTE

Press to toggle

Enabled button

Toggle buttons:

Disabled button

Focused button

When using the encoder to navigate in the interface,

the focused button is highlighted in a white box. Use

the touch screen, or press encoder to select function.

Selected button

(See Specications Table above for step

values).

When the eld is selected, you can rotate

encoder to change its value. Rotate clockwise

to increase, and counter-clockwise to decrease

value.

Pic 13

PHASE button

Press to toggle

Pic 14 Pic 15

Pic 16 Pic 17

Pic 18

Pic 19

Pic 20

Pic 21

Pic 22

VHD5000 GUI · Amplier Settings

Delay Setting

Pic 23: Delay (TIME DISTANCE box) can be set in meters or milliseconds.

Pic 24: Touch box or use encoder to focus on the rst number.

Pic 25: Focus on specic range using encoder.

Pic 26: Press encoder to select range.

Pic 27: Rotate encoder to set value. This will change the value in 0.05ms steps which is approximately 0.02m.

For that reason, when setting meters, it adds or subtracts approximately 0.02, 0.1, 1, 10, or 100 meters depending

on the selected range.

Pic 28: When the maximum allowable delay is reached, MAX will appear at the top of the display

VHD5000 GUI · Amplier Settings

UNMUTE/MUTE

LEVEL: -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4 dB

A: UNMUTE/MUTE

B: UNMUTE/MUTE

HF RECOVERY: ON/OFF

GAIN: -60, -57, -54, -51, -48, -45, -42, -39, -36, -34, -32, -30,

-28, -26, -24, -22, -20, -18, -16, -14, -12, -11, -10, -9, -8, -7, -6,

-5, -4, -3, -2, -1, 0 dB

If HF RECOVERY is enabled:

HI-PASS FILTER: 7.2, 3.3, 2.2, 1.5kHz

GAIN

LONG DISTANCE EQ: ON/OFF

This setting increases gain to increase long throw

characteristics of HF in larger venues.

UNMUTE/MUTE

LEVEL: -6, -4, -2, -1, 0, 1, 2, 3, 4, 5, 6 dB

A: UNMUTE/MUTE

B: UNMUTE/MUTE

LOW MID MODULE COUNT: 1, 2, 3 VHD8.10

You can individually mute the A or B channels when

a VHD5000S is connected. Otherwise these two buttons are

disabled.

LOW MID MODULES COUNT

This function is used to tell the controller how many

VHD8.10 are connected to the system.

A drop down list is displayed where you can select how

many VHD8.10 cabinets are being deployed in the system

using the touch screen or with the push button function of

the encoder.

Low

Pic 29

Pic 30

VHD5000 GUI · Amplier Settings

Sub A, B

Sub Cardioid

Fill

UNMUTE/MUTE

LEVEL: -20, -18, -16, -14, -12, -10, -8, -6, -4, -2, -1, 0, 1, 2, 3, 4, 5,

6, 7, 8, 9, 10 dB

PHASE: 0°, 180°

DELAY - TIME: 0 - 109.2ms, 0.05ms step;

DISTANCE: 0 - 37.46m, cca 0.02m steps

FULLRANGE label is visible when LOW FULLRANGE

is selected to ON

UNMUTE/MUTE

LEVEL: -20, -18, -16, -14, -12, -10, -8, -6, -4, -2, -1, 0, 1, 2, 3, 4, 5,

6, 7, 8, 9, 10 dB

PHASE: 0°, 180°

PREQUENCY: 35, 40, 45, 50, 55, 60, 65, 70, 75 Hz

DELAY - TIME: 0 -102.1ms, 0.05ms step;

DISTANCE: 0 - 35.2m, cca 0.02m steps

Set sub channels mode in input window

UNMUTE/MUTE

LEVEL: -54, -51, -48, -45, -42, -39, -36, -33, -30, -28, -26, -24,

-22, -20, -18, -16, -14, -12, -10, -8, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3,

4, 5, 6 dB

PHASE: 0°, 180°

HI-PASS FILTER: 800Hz, 400Hz, 100Hz,

OFF DELAY - TIME: 0 - 379ms, 0.05ms step;

DISTANCE: 0 - 130m, cca 0.02m step

Pic 31

Pic 32

Pic 33

VHD5000 GUI · Amplier Settings

Inhaltsverzeichnis

Andere KV2 Audio Verstärker Handbücher

KV2 Audio

KV2 Audio EPAK 2500R Bedienungsanleitung

KV2 Audio

KV2 Audio VHD3200 Bedienungsanleitung

KV2 Audio

KV2 Audio VHD 2000 Bedienungsanleitung

KV2 Audio

KV2 Audio ESP4000 Bedienungsanleitung

KV2 Audio

KV2 Audio ESR2800 Bedienungsanleitung

KV2 Audio

KV2 Audio ESR3000D Bedienungsanleitung

KV2 Audio

KV2 Audio SL3000D Bedienungsanleitung

KV2 Audio

KV2 Audio VHD-Preamp Bedienungsanleitung

KV2 Audio

KV2 Audio ESP2000 Bedienungsanleitung

KV2 Audio

KV2 Audio VHD PRE-EQ Bedienungsanleitung

KV2 Audio

KV2 Audio SD8 Bedienungsanleitung

KV2 Audio

KV2 Audio ESP1000 Bedienungsanleitung

KV2 Audio

KV2 Audio VHD 2000 Bedienungsanleitung

KV2 Audio

KV2 Audio COMPEX Bedienungsanleitung

KV2 Audio

KV2 Audio SD8 Bedienungsanleitung

KV2 Audio

KV2 Audio VHD Series Bedienungsanleitung

KV2 Audio

KV2 Audio VHD5 Series Bedienungsanleitung

KV2 Audio

KV2 Audio KT2.0 Bedienungsanleitung

KV2 Audio

KV2 Audio VHD 2000 Bedienungsanleitung

KV2 Audio

KV2 Audio KVV 987 113 Bedienungsanleitung

KV2 Audio

KV2 Audio ESP2000D Bedienungsanleitung

KV2 Audio

KV2 Audio EPAK 2500 Bedienungsanleitung

KV2 Audio

KV2 Audio VHD3200 Bedienungsanleitung

KV2 Audio

KV2 Audio VHD3200D Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung