Kyocera EcoLAN 3000E Bedienungsanleitung

Network Connectivity for Kyocera Printers

Kyocera EcoLAN 3000E

Quick Configuration Guide

All manuals and user guides at all-guides.com

all-guides.com

FCC Notice:

This equipment complies with Part 15 of FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Trademarks

Kyocera®isaregistered trademarkof KyoceraCorporation. NetWare®isa registered trademark of

Novell, Incorporated. Windows®is a registered trademark of Microsoft Corporation. Macintosh®is a

registeredtrademarkofApple Computer, Incorporated. PostScript®andAcrobat®areregistered

trademarksofAdobe Systems, Incorporated. Allotherproducts referenced aretrademarks or registered

trademarksoftheirrespectivecompanies.

Thank You

Thank you for choosing the award winning Kyocera network printing products. We are

sure you will appreciate the high performance and low cost of ownership that are the

hallmarks of Kyocera products.

All manuals and user guides at all-guides.com

Contents

Introduction......................................................................... 4

Using the CD ROM ............................................................. 4

Supported Kyocera Printer Models................................... 5

EcoLAN 3000E Hardware Installation ................................ 5

NetWare 2.x & 3.x Configuration ....................................... 6

NetWare 4.x & 5.x Directory Services Configuration ....... 7

Macintosh Configuration ................................................. 10

Windows Peer to Peer Printing Configuration ............... 12

Windows NT 4.0 Configuration........................................ 14

DHCP Configuration (Dynamic Host Configuration Protocol) .......... 16

WINS Configuration (Windows Internet Naming Service) ................ 17

UNIX Configuration ........................................................... 18

IP Address Setup with the Printer Front Panel............... 19

All manuals and user guides at all-guides.com

Introduction

The EcoLAN 3000E is the next generation Kyocera internal network interface card

allowing easy installation without removing the printer mainboard. Its features include:

rEasy Slide-in Installation rMultiple Protocol Support

r10/100 Mbps Ethernet Interface rSNMP Support

r10BaseT / 100BaseTAuto Detection rFlash Upgrade Capability

rSetup with the Printer Front Panel rWINS Support

rDHCP Support forAutomatic IP rHTTP Server for Management

AddressAssignment with a Browser

The EcoLAN 3000E enables Kyocera FS-Series and LS-Series printers to communicate

over an Ethernet network with many different network operating systems, including

NetWare, Macintosh, UNIX, and Windows.

This Guides Role

This Quick Configuration Guide provides concise software configuration instructions

allowing an experienced system administrator to get the 3000E up and running quickly.

For more complete instructions or for printing or configuration options not covered in this

guide, please refer to the 3000E Users Manual on the CD ROM.

Using the CD ROM

The CD ROM packaged with the 3000E includes all installation and configuration utilities,

as well as the 3000E Users Manual and this guide in .PDF format. Quick access to the

utilities and documentation is provided by the CONTENTS.PDF file. This file and all other

documentation on the CD ROM are in Adobe Acrobat .PDF format and cannot be read

withoutAdobeAcrobat Reader 3.0 or later. (Note: The utilities may also be installed

without using CONTENTS .PDF by navigating the CD ROM to the appropriate setup file.)

On Windows 95, 98 and NT 4.0 systems, inserting the CD ROM will auto-load a screen

with options to installAcrobat Reader or to display CONTENTS.PDF. The user will be

prompted to installAcrobat Reader if it is not detected on the system.

On other systems, Acrobat Reader may be installed manually from the CD ROM.

Windows NT 3.51: From the Program Manager File menu, select Run and type:

D:\acroread\win\rdr_srch\32bit\setup.exe

Windows 3.1, 3.11: Same as NT 3.51, but type: D:\acroread\win\rdr_srch\16bit\setup.exe

Macintosh: Run the Reader 3.01 Installer in the Acroread, Mac, Reader + Search,

Reader folder. It is also very useful to install the search capability from the Search folder.

UNIX: See instguid.txt in the acroread/unix/rdr_search directory on the CD ROM.

OnceAcrobat Reader is installed, launch the Contents.PDF file on the CD ROM.

All manuals and user guides at all-guides.com

Supported Kyocera Printer Models

The EcoLAN 3000E is compatible with the FS/LS-600, 680, 800, 1700+, 3700+, 5800C,

6700, 7000+, 9000 and any other Kyocera printer with the slide-in interface. The 3000E is

compatible with the upper (hard disk) interface slot of an FS/LS-7000 with a Software

version of 25.05 or later. The Software version is displayed on the printer status page.

The EcoLAN 3000E is NOT compatible with previous FS/LS-Series models, including,

FS/LS-400, 850, 1500/A, 1550/A/+, 1600/A/+, 1700, 3400/A/+, 3500/A, 3600/A/+, 3700,

5500, 6500/+.

EcoLAN 3000E Hardware Installation

The 3000E is a new slide-in interface board which does not require the removal of the

printers main board for installation. These instructions describe the installation into the

FS-800 but are similar for any Kyocera printer with the slide-in interface.

1. Remove the two screws securing the interface slot cover on the rear panel

(shown) or side panel (not shown) of the printer and discard the interface slot cover.

2.Align the edges of the 3000E board with the rails in the interface slot and slide

the 3000E into the printer. Secure with the two screws removed in Step 1.

All manuals and user guides at all-guides.com

NetWare 2.x & 3.x Configuration

1. Login as Supervisor and start PCONSOLE.

2. Define the Print Queue.

êIf a Print Queue already exists that will be assigned to the 3000E, skip to step 3

êSelect Print Queue Information from the Available Options menu.

êPress INSERT, type a name for the new queue to be serviced by the 3000E

and press ENTER. Press ESCAPE to return to theAvailable Options menu.

3. Define the Print Server.

êSelect Print Server Information from the Available Options menu.

êPress INSERT, type the 3000E Print Server name and press ENTER. The Print

Server name may be found on the 3000E status page under Novell Network

Information. Press the Status key on the printer front panel to print a printer

status page and a 3000E status page.

4. Define the Printer.

êPress ENTER with the new Print Server highlighted, select Print Server

Configuration, then select Printer Configuration.

êSelect Printer 0 and define a more meaningful name for the printer if desired.

The printer name is displayed in various NetWare printing messages, such as

when notifying users that their job is completed.

êSet the TYPE field to Remote/Other Unknown.

êPress ESCAPE to exit and select Yes to save the changes. Press ESCAPE

again to return to the Print Server Configuration menu.

5. Assign the Print Queue.

êSelect Queues Serviced By Printer, highlight the 3000E printer on the

Defined Printers list and press ENTER.

êPress INSERT to display theAvailable Queues list. Select the desired queue

and assign a Priority level (recommended choice is 1).

êPress ESCAPE several times to exit PCONSOLE.

6. Confirm Successful Configuration.

êTurn the printer off and then on. Wait 2 minutes and press the Status key on

the front panel. This will print a printer status page and a 3000E status page.

êThe Novell Connection Information in the bottom half of the status page

displays the printer name, file server, queue, etc. If it displays Attached: Yes,

this confirms that the 3000E Print Server is ready to accept print jobs.

êIf the status page does not display Attached: Yes, please verify that the Novell

Print Server Name on the status page under Novell Network Information

matches exactly with the Print Server name that was entered in PCONSOLE or

refer to the troubleshooting section in the Users Manual.

All manuals and user guides at all-guides.com

all-guides.com

NetWare 4.x & 5.x

Directory Services Configuration

NetWare Directory Services (NDS) configuration is accomplished using two utilities; 1)

NetWares NWAdmin is used to define the required Directory Services objects, and 2)

the 3000E parameters are configured with the Windows-based ManagementAccess

Program (MAP) if using IPX or with a web browser if using IP.

NWAdmin Configuration

1. Enter NWAdmin and browse the tree to the container which will hold the print

objects. Note: You must have the Object Create right in this container or you will be

unable to create the print objects. Right click on the container and select Details.

The top of the Identification page displays the Name of the container. This is the full

path or context of the current container (e.g., Sales.Dallas.Acme). Make a note of

this context in the space below as it will be needed during the 3000E configuration.

Close the Details window.

Print Server Context: _______________________________

2. Select Print Services Quick Setup from the Tools menu.

êEnter the desired names for Print Server, Printer, and Queue. Make a note of the

Print Server name in the space below as it will be needed during the 3000E

configuration.

Print Server Name: ________________________________

êIn the Printer Type field select Other/Unknown from the list.

êIn the Print Queue Volume field select the desired NetWare volume which will

contain the queue. The selected volume should have sufficient disk space to

spool large print jobs.

êClick Create to complete the Print Services Quick Setup.

3. Optional: Right click on the Print Server, Printer, or Queue objects and select

Details to define a Print Server password, select Printer notification options, or to

assign Queue users. If a Print Server password is defined, make a note of it as it

must be duplicated exactly during the 3000E configuration.

Print Server Password: ________________________________

All manuals and user guides at all-guides.com

NetWare Directory Services Configuration continued...

3000E IPX Based Configuration

IPX configuration is accomplished using the Management Access Program (MAP).

1. Install and Run MAP.

êInsert the CD included with the EcoLAN 3000E.

êIn Windows 95, 98 or NT 4.0, click on Start and select Run, or in the

Windows 3.1 or NT 3.51 Program Manager, select File and choose Run.

êType: D:\MAP\SETUP.EXE (where D = CD drive letter) and click OK.

êOnce installed, double click on the MAP icon to start the program.

2. Select the EcoLAN 3000E to Configure.

êClick on the arrow next to the Server dialog for the list of available EcoLAN

cards displayed by unit serial number. To display the name and other details of

the EcoLAN cards, select Show All from the Options menu.

êClick on the 3000E to be configured.

3. Continue with the 3000E IP and IPX Common Configuration section below.

Note: If the 3000E Does Not Appear on the List

If your network is using multiple IPX frame types, and the workstation running MAP

and the 3000E are NOT using the same frame type, then the 3000E will not appear in

the list.Acommon scenario is that the workstation frame type is set toAuto and is

using frame type 802.2 while the 3000E is using frame type 802.3. The 3000E frame

type can be changed using the printer front panel. See the instructions on page 19 for

setting the IP address with the front panel, but go into the NetWare submenu rather

than the TCP/IP submenu.

3000E IP Based Configuration

1. Set the printers IPAddress, Subnet Mask, and Default Gateway with DHCP(page

16) or with the printers front panel (page 19).

2. Connect to the 3000E with a web browser by entering the IP address as the URL,

e.g. http://206.129.6.54

3. When the 3000E home page is displayed, select 3000E Configuration and

continue with the instructions in the next section.

3000E IP and IPX Common Configuration

1. Password Protection

Many of the configuration options are password protected. The default password

is: sysadm The password is case sensitive. To change the password, select

Change Password in the System column.

All manuals and user guides at all-guides.com

2. NetWare Configuration.

êSelect Setup NetWare in the Protocols column.

êEnter the Print Server Name, Preferred NDS Context, and Print Server

Password (if a password was defined) exactly as they were entered in

NWAdmin. Note: Entries are not case sensitive (except the sysadm pass-

word). Preferred Bindery File Server and Preferred NDS Tree should remain

blank unless Bindery mode is used or if the network includes multiple NDS

trees.

êIf not using Bindery emulation, click the Disable Bindery box.

êType the password, sysadm, in the appropriate box and click Accept

Settings. After a few seconds the screen should report that the update was

successful. Click the BackArrow icon twice to return to the 3000E Configura-

tion page.

êThe changes made to the 3000E do not take effect until the unit is reset. Click

on Reset in the System column, then click on the Reset Unit button. After a

few seconds the screen should report that the unit was reset.

3. Confirm Successful Configuration.

êReconnect to the 3000E.After the Reset, the program advises waiting 2

minutes before reconnecting, but the 3000E may be available sooner.

êAt the 3000E Configuration page, select Unit Status in the System column.

êScroll down to display the NetWare status. The Queue Status should be

Attached.

êIf the Queue Status is not Attached, please verify that the entries for Print

Server Name, Preferred NDS Context, and Print Server Password match those

defined in NWAdmin or refer to the troubleshooting section in the Users

Manual.

All manuals and user guides at all-guides.com

Macintosh Configuration

KPDL, Kyoceras PostScript compatible mode is required for Macintosh printing. KPDL

is standard on many Kyocera printers, however, it is optional on the following models:

FS-600, FS-680, FS-7000 and all LS (Japanese) models. If KPDL is installed, it will

appear in the Emulation list in the following procedure and on the printer Status Page.

Setting KPDL Emulation

For all printers except the FS-600 and FS-680, the default emulation for the Option

Interface must be set to KPDL or KPDL (Auto).

1. Press the MODE key. If the first line of the LED panel does not already display

INTERFACE, press the

key until INTERFACE is displayed.

2. If the line below INTERFACE does not already display OPTION (OPTION 2

on the FS-7000), press the ENTER key, then

until OPTION is displayed

and press ENTER.

3. Press

until Emulation is displayed. Press the ENTER key. A question

mark will appear next to the current emulation.

4. Press

until KPDL or KPDL(Auto) is displayed. If the printer will be

receiving only KPDL jobs, set the emulation to KPDL. If it will also be receiving

non-KPDL jobs, set it to KPDL (Auto). PressENTER to set the new emulation.

5. Press the MODE key to exit the menu system.

Naming the Printer and Setting the Zone

The 3000E has a default name of KYO_<serial#>, e.g. KYO_163479. This may be

changed to a more user friendly name using a standard web browser. Connecting with

a browser requires TCP/IP to be setup on the printer and the Macintosh. If TCP/IP is

not in use, the name may be changed using the KyoManage utility included on the

3000E CD. See the Users Manual for KyoManage instructions.

1. Set the printers IPAddress, Subnet Mask, and Default Gateway with DHCP or with

the printers front panel procedure on page 19.

2. Connect to the 3000E with a web browser by entering the IP address as the URL,

e.g. http://206.129.6.54

3. When the 3000E home page is displayed, select 3000E Configuration.

4. Select Setup AppleTalk in the Protocols column.

5. Enter the Printer Name. Enter the Zone Name if other than the default zone.

6. Type the password, sysadm, in the appropriate box and click Accept Settings.

After a few seconds the screen should report that the update was successful.

7. Click the BackArrow icon twice to return to the 3000E Configuration page. If

NetWare is not in use, it may be disabled under the Setup NetWare option. Be

aware that Windows IPX Peer to Peer printing requires NetWare to be enabled.

8. The new printer and zone names do not take effect until the 3000E is reset. Select

Reset in the System column, then click on Reset Unit.

All manuals and user guides at all-guides.com

Andere Handbücher für EcoLAN 3000E

Inhaltsverzeichnis

Andere Kyocera Drucker Handbücher

Kyocera

Kyocera ECOSYS M6530cdn Bedienungsanleitung

Kyocera

Kyocera ECOSYS P2040dn Bedienungsanleitung

Kyocera

Kyocera ECOSYS M3145idn Bedienungsanleitung

Kyocera

Kyocera FS-820 Bedienungsanleitung

Kyocera

Kyocera ECOSYS PA6000 Series Bedienungsanleitung

Kyocera

Kyocera PA2100 Bedienungsanleitung

Kyocera

Kyocera Ecosys FS-1320D Bedienungsanleitung

Kyocera

Kyocera FS-3040MFP Bedienungsanleitung

Kyocera

Kyocera ECOSYS FS-6525MFP Bedienungsanleitung

Kyocera

Kyocera EP 510DN Bedienungsanleitung

Kyocera

Kyocera KM-C830 Bedienungsanleitung

Kyocera

Kyocera TASKalfa 2551ci Bedienungsanleitung

Kyocera

Kyocera EP 470DN Bedienungsanleitung

Kyocera

Kyocera Ecosys FS-6700 Bedienungsanleitung

Kyocera

Kyocera ECOSYS P3155dn Bedienungsanleitung

Kyocera

Kyocera FS-1010 Bedienungsanleitung

Kyocera

Kyocera ECOSYS P5026cdw Bedienungsanleitung

Kyocera

Kyocera ECOSYS P5021cdn Bedienungsanleitung

Kyocera

Kyocera FS-2000D Bedienungsanleitung

Kyocera

Kyocera C8100DN - Color Laser Printer Bedienungsanleitung

Kyocera

Kyocera Copystar CS-2035 Bedienungsanleitung

Kyocera

Kyocera FS-1100 Bedienungsanleitung

Kyocera

Kyocera ECOSYS M6230cidn Bedienungsanleitung

Kyocera

Kyocera ECOSYS MA4500fx Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung

Lexmark

Lexmark Infoprint 1332 Bedienungsanleitung