La Crosse Technology 616-146v2 Bedienungsanleitung

Model: 616-146v2 www.lacrossetechnology.com/support Page | 1

Model: 616-146v2

Quick Setup Guide

DC: 090116

Atomic Projection Alarm

with Indoor and Outdoor Temperature

Snooze/Backlight

BUTTONS

TX141v2

Outdoor

Sensor

Time, Alarm

with Snooze,

& Calendar

Indoor/Outdoor

Temperature +

Trends

Projection

Arm

Rotates 180°

2 “AAA”

Batteries

2 “AA”

Batteries

USB Charge

Port, 1 Amp

5 Volt

Adapter

Model: 616-146v2 www.lacrossetechnology.com/support Page | 2

GET STARTED

Step 1:Insert the included 5-volt AC power adapter into projection

Alarm and then into wall outlet.

Step 2:Insert 2new“AAA”batteries (not included) into the projection

alarm. Observe the correct polarity.

Step 3:Insert 2 new “AA”batteries (not included) into the TX141v2

sensor. Observe the correct polarity. The red LED will flash

when transmitting.

Step 4: After 5 minutes place the sensor outside in a shaded location.

Note: If the outdoor temperature is not displayed after 3 minutes, hold

the +/TEMP button to search for outdoor sensor. Then, press the

TX button on the sensor to send signal.

SET TIME AND DATE

1. Hold the SET/°F/°C button to enter time set mode.

2. Use the +/TEMP or -/TIME buttons to adjust values.

Press and hold for fast adjustment.

3. Press the SET/°F/°C button to confirm adjustments and move to

the next item.

Time and Date setting order:

1. WWVB(ON/OFF)

2. Time Zone

3. DST Daylight Saving Time (ON/OFF)

4. 12/24 Hour Time Format

5. Hour

6. Minutes

7. Year

8. Month

9. Date

Note: Day of the week sets automatically.

Press the SET/°F/°C button to exit, or wait 20 seconds without

pressing buttons to return to the normal time display.

FAHRENHEIT/CELSIUS

Press the SET/°F/°C button to select Fahrenheit or Celsius

temperature display.

Model: 616-146v2 www.lacrossetechnology.com/support Page | 3

SET TIME ALARM

1. Hold the ALARM button to enter alarm time set mode.

2. Use the +/TEMP or -/TIME buttons to adjust values.

3. Press the ALARM button to confirm adjustments and move to the

next item.

Alarm Time setting order:

1. Hours

2. Minutes

ACTIVATE/DEACTIVATE TIME ALARM

Press the ALARM button once to view alarm time.

Press the ALARM button again to activate the alarm.

Bell icon appears.

Press the ALARM button again to deactivate the alarm.

The bell icon disappears.

SNOOZE (Silences alarm temporarily)

Press the SNOOZE/LIGHT button to silence alarm for 9 minutes.

Zz will show.

When in snooze mode, press ALARM to stop alarm for one day.

Note: The alarm is crescendo sound. The alarm will sound for 2

minutes and then shut off completely.

BACKLIGHT AND PROJECTION INTENSITY

Press and release the SNOOZE/LIGHT button to adjust the

brightness of the backlight and projection image (together):

High

Low

OFF

Note: When the Adapter is NOT in use, the High/Low/On/Off features

are not available.

PROJECTION (On/Off, rotate, projection mode)

Battery Power: Press and release the SNOOZE/LIGHT button to

show the projection for 10 seconds.

A/C Power: Projection is displayed constantly unless turned off.

Note: Projection will not display constantly when operating on battery

power.

Alarm

Bell Icon

Model: 616-146v2 www.lacrossetechnology.com/support Page | 4

Rotate Projection:

Press the PROJECTION button to rotate the projection image 90

degrees.

Press the PROJECTION button again to rotate another 90

degrees.

Change Projection Modes: Hold, then release the PROJECTION

button to switch projection modes. Watch the projection image to view

the changes.

Time and Outdoor Temperature: alternate every 5 seconds

(default)

Time only

Outdoor Temperature only

USB CHARGE PORT

Charge a smart phone, camera or other devices when the forecast

station is plugged into a power outlet with the included 5V AC

adapter.

Note: This is a power-output charging port. It does not supply power

to the projection clock.

Connect your external device’s USB charging cable (not included)

to the USB charging port.

Charging times will vary.

USB Power Output: 1Amaximum current. Charge 1A devices or

devices that are self-regulating.

MANUAL WWVB RADIO-CONTROLLED TIME SEARCH

Press the -/TIME button to start or stop a manual signal search.

WWVB Icon will flash

For information about WWVB visit:

www.nist.gov/pml/div688/grp40/wwvb.cfm

LOW BATTERY ICON

If the icon is displayed in Outdoor Temperature section,

replace batteries in the outdoor sensor.

If the icon is displayed in Indoor Temperature section,

replace batteries in the projection clock.

WWVB

Icon

Low

Battery

Icon

Model: 616-146v2 www.lacrossetechnology.com/support Page | 5

TEMPERATURE TREND INDICATORS

The temperature (2°F/1°C) trend indicators update every 30 minutes

or less.

Temperature has risen in the past 3 hours.

Temperature has not changed in the past 3 hours.

Temperature has fallen in the past 3 hours.

SEARCH FOR OUTDOOR SENSOR

Hold the +/TEMP button for 3 seconds to search for the outdoor

sensor .

CARE AND MAINTENANCE

Do not mix old and new batteries

Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries

Always purchase the correct size and grade of battery most

suitable for the intended use.

Replace all batteries of a set at the same time.

Clean the battery contacts and also those of the device prior to

battery installation.

Ensure the batteries are installed correctly with regard to polarity

(+and -).

Remove batteries from equipment with is not to be used for an

extended period of time.

Remove expired batteries promptly.

RESTART

If the outdoor temperature displays dashes:

Remove the AC adapter and remove batteries from the projection

alarm &sensor.

Press a button 20 times.

After 15 minutes, return to Step 1 under Get Started.

POSITION OUTDOOR SENSOR

Mount the outdoor sensor on a North-facing wall or in any well

shaded area. Under an eave or deck rail is preferred.

Model: 616-146v2 www.lacrossetechnology.com/support Page | 6

The maximum transmitting range to the atomic projection alarm is

over 300-feet (91 meters) in open air, not including walls.

POSITION PROJECTION ALARM

The projection alarm has a wide base to sit on a desk or table.

Choose a location 6 feet or more from electronics such as

cordless phones, wireless gaming systems, televisions,

microwaves, routers, baby monitors, etc., which can prevent

signal reception.

Position near an exterior wall that faces Ft. Collins Colorado for

WWVB time signal reception.

Place within 300 ft. (91 meters) of the outdoor sensor.

Obstacles such as walls, windows, stucco, concrete and large

metal objects can reduce the range.

Be aware of electrical wires and plumbing within a wall. This will

interfere with RF (radio frequency) signal reception.

WARRANTY AND SUPPORT

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date

of purchase) on this product relating to manufacturing defects in materials &

workmanship.

View full warranty details online at:

www.lacrossetechnology.com/warranty_info.pdf

Before returning a product, please contact our friendly customer

support with questions or visit our online help:

La Crosse Technology, Ltd

2830 South 26th St

La Crosse, WI 54601

Contact Support:

1-608-782-1610

Online Product Support:

www.lacrossetechnology.com/support

Product Registration: www.lacrossetechnology.com/support/register

Protected under U.S. Patents: 5,978,738 | 6,076,044 |RE43903

Model: 616-146v2 www.lacrossetechnology.com/support Page | 7

SPECIFICATIONS

Indoor:

Temperature Range:

+32°F to +122°F (0°C to 50°C)

Interval:

About every 30 seconds

Outdoor:

Temperature Range:

-40°F to 140°F (-40°C to 60°C)

Alkaline Batteries:

-20°F to 140°F (-28.8°C to 60°C)

Lithium Batteries:

-40°F to 140°F (-40°C to 60°C)

NOTE:

Temperatures below - 20°F

(-28.8°C) require Lithium batteries in the

outdoor sensor.

Distance:

Over 300 ft. (91 meters)

RF 433MHz (open air)

Interval:

About every 30 seconds

USB Charging Port

USB Output:

1 Amp maximum current

Power:

Projection Alarm

Primary Power:

AC6: HX09-0501500-AU

5-volt AC power adapter (included)

Optional/Battery Backup

Optional 2-AAA, IEC, LR3 batteries

(not included)

TX141v2 Sensor :

2-AA, IEC, LR6 batteries

(not included)

Battery Life:

Projection Alarm

Battery Backup:

Battery life is over 24 months when using

the AC adapter for primary power

TX141v2 Sensor :

Battery life is over 24 months when using

reputable battery brands for both Alkaline

and Lithium batteries

Dimensions:

Projection Alarm:

5.23” L x 1.96” W x 4.33” H

(133 x 50 x 110 mm)

TX141v2 Sensor :

1.57" x 0.79" x 5.12"

(40 x 20 x 130mm)

Model: 616-146v2 www.lacrossetechnology.com/support Page | 8

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device must not be co-located or operating in conjunction with any other

antenna or transmitter.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference

that may cause undesired operation.

Caution!

The manufacturer is not responsible for any radio or TV interference caused

by unauthorized modifications to this equipment. Such modifications could

void the user authority to operate the equipment.

part, or duplicated or processed using electronic, mechanical or chemical

process without the written permission of the publisher.

This booklet may contain errors or misprints. The information it contains is

regularly checked and corrections are included in subsequent editions. We

disclaim any responsibility for any technical error or printing error, or their

consequences.

All trademarks and patents are recognized.

CANADA STATEMENT

This device complies with Industry Canada’s license-exempt RSSs.

Operation is subject to the following two conditions:(1) This

device may not cause interference; and(2) This device must accept

any interference, including interference that may cause

undesired operation of the device.

Andere Handbücher für 616-146v2

Inhaltsverzeichnis

Andere La Crosse Technology Wecker Handbücher

La Crosse Technology

La Crosse Technology 616-1412v2 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology W85923V3 Abmessungen

La Crosse Technology

La Crosse Technology 616-143 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 616-1412V4 Abmessungen

La Crosse Technology

La Crosse Technology RADIO CONTROLLED PROJECTION ALARM CLOCK Bedienungsanleitung

La Crosse Technology

La Crosse Technology WT-5220U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology Soluna C79141 Abmessungen

La Crosse Technology

La Crosse Technology WT-5432 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 616-1950V2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 817-2410B Bedienungsanleitung

La Crosse Technology

La Crosse Technology SOLUNA C79141-MX Bedienungsanleitung

La Crosse Technology

La Crosse Technology Equity 20090 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 617-1270 Installationsanleitung

La Crosse Technology

La Crosse Technology 616-146 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WT-5120 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WT-5130ER Bedienungsanleitung

La Crosse Technology

La Crosse Technology WT-2100 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8248 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WT-2192 Bedienungsanleitung

La Crosse Technology

La Crosse Technology CA80765 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 617-2410V3 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 616-143 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WT-5431 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WT-5350 Bedienungsanleitung

Beliebte Wecker Handbücher anderer Marken

Steren

Steren CLK-210 Bedienungsanleitung

COP-USA

COP-USA ALCDVR32-SL Bedienungsanleitung

Philips

Philips HF3505/70 Technisches Handbuch

Casio

Casio PQ-70 Bedienungsanleitung

iHome

iHome IA63 Bedienungsanleitung

Coopers

Coopers 9765 Bedienungsanleitung

ANJANK

ANJANK AC-190 Leitfaden

TFA

TFA 98.1075 Bedienungsanleitung

Sharper Image

Sharper Image 204050 Bedienungsanleitung

Lumie

Lumie Zest Bedienungsanleitung

Dexford

Dexford RCT200 Bedienungsanleitung

Philips

Philips AJL303/37B Bedienungsanleitung

RST

RST Q754 Bedienungsanleitung

iHome

iHome iKT50 Bedienungsanleitung

Sony

Sony dash HID-B7 Bedienungsanleitung

SVINZ

SVINZ SCC009 Bedienungsanleitung

Clas Ohlson

Clas Ohlson 918863 Bedienungsanleitung

IKEA

IKEA FNURRA Bedienungsanleitung