La Crosse Technology 617-148TXT Bedienungsanleitung

SET UP GUIDE

MODEL NUMBER: 617-148TXT

WIRELESS CHARGING

ALARM CLOCK

Table of Contents

BASICS

OUTDOOR SENSOR

Initial Setup

Buttons

LCD Display

LCD Display Brightness

Auto-Dim

Display Modes

Display Mode Options

Use the +/- buttons on

the back of the clock to

adjust the values.

Initial Setup

Power Up

Settings Menu Order

1. Insert 2 AA batteries into your Outdoor Sensor.

2. Insert the 5V Power Adapter into an outlet, and then

into the Power Jack on the bottom of the alarm clock.

3. A greeting will appear and then bring you into your

Settings Menu. Use the instructions below to adjust your

settings.

4. Position your outdoor sensor in a shaded location.

See page 12 for details.

Note: To access the Settings Menu after this startup,

press and hold the SET button.

• Language • Hour • Minutes •Year •Month •Date

• Fahrenheit/Celsius •Thank you

Press the SNOOZE/LIGHT

button at anytime to exit.

APPENDIX

ALARM

Setting the Alarm

Activate/Deactivate

Snooze Duration

GLOW LIGHT

Glow Light Selection

Glow Light Brightness

CHARGING

BASICS

Press the SET button

to conﬁrm selection

and move to next

step.

Language: Whichever language is selected, the following instructions and weekday

will be presented in that language.

Weekday: Weekday will set automatically after year, month, & date settings are

adjusted.

Position Outdoor Sensor

Optional Sensor Shield

Search for Outdoor Sensor

Speciﬁcations

Factory Reset

Warranty

Recycling & Disposal

Cautions

Care & Maintenance

Statements

5W Wireless Charger

Phone Compatibility

Wireless Charging FAQs

1 Amp USB Charging Port

Bottom View

Power Jack

SUPPORT

Support Information

Stay in Touch

Buttons

BASICS

1. GLOW

4. PLUS/MINUS (+/-)

2. SET

3. ALARM

6. RESET

Press to change the Glow

Light color. Hold to turn Glow

Light o.

Press to activate/deactivate or

hold to enter alarm settings.

Press to increase/decrease

Glow Light Brightness. Press

to increase/decrease values in

Settings Menu, hold to change

values quickly.

Press to snooze sounding

alarm, adjust backlight, or hold

for Auto-Dim settings.

Press to change Display

Modes. Hold to enter

Settings Menu.

Top View

Back View

Press to factory reset

your clock

RESET

5. SNOOZE/LIGHT

LCD Display

BASICS

AM/PM

Indicator

Auto Dim

Indicator

Time

Alarm

Indicator

and Time

Weekday

and Calendar

Outdoor Sensor

Reception

Temperature

Snooze

Indicator

Outdoor Temperature

Indicator.

Indoor Temperature

Indicator.

LCD Display Brightness

Adjusting the LCD Display Brightness

Press the SNOOZE/LIGHT button on the top of the

clock to adjust the backlight intensity. There are 4

brightness levels, plus an o option.

Auto-Dim Settings

Hold the SNOOZE/LIGHT button to

enter the Auto-Dim Settings Menu.

Program your LCD display to automatically dim during preselected hour.

Press the +/- buttons to turn the

Auto-Dim feature on or o. Press

SNOOZE/LIGHT to conﬁrm.

Press the +/- buttons to adjust the

starting hour. Press SNOOZE/LIGHT

to conﬁrm.

Press the +/- buttons to adjust the

stopping hour. Press SNOOZE/LIGHT

to conﬁrm and exit.

BASICS

The icon will appear on the LCD when activated.

Display Modes

Selecting the Display Mode

Press the SET button on the back of the clock

to select a display mode. Clock will stay on

selection.

BASICS

Display Mode Options

Time and Indoor Temperature.

Time and Outdoor Temperature.

Outdoor Temperature, Indoor

Temperature, Time is small.

Auto-Dim

Time Alarm

Activating & Deactivating the Alarm

Setting the Alarm

ALARM

1. Hold the button on the back

of the clock to enter the Alarm

Settings Menu.

2. Use the +/- buttons to select Daily

Alarm, Weekday M/F Alarm, or

SAT/SUN Alarm. Press to conﬁrm.

4. Next, use the +/- buttons to set your

desired snooze duration (5 to 120

minutes). Press to conﬁrm and

exit the Alarm Settings Menu.

Your sound alarm is now activated,

indicated by the icon on the LCD.

Press the button to activate/

deactivate the alarm and to view

your alarm time.

The icon will appear on the

LCD when the alarm is active.

3. Use the +/- buttons to set your

desired time. Press to conﬁrm.

Time Alarm

Ascending Alarm

Snooze Duration Countdown

The alarm will increase in beep frequency over a 2-minute period.

After the 2-minute time frame, the alarm will stop if not snoozed or turned o.

ALARM

Note: The snooze feature can be repeated as many times as desired.

When your alarm sounds, Press the

SNOOZE/LIGHT button to snooze your

alarm for your preselected snooze

duration.

A countdown will appear on screen.

When the snooze time reaches “0,” the

alarm will sound again.

Set a Daily, Weekday, or Weekend only Alarm.

Glow Light Selection

Glow Light

Press the GLOW button to turn on the Glow Light and toggle

through the dierent light options.

Glow Light Color Selection Order:

Select Glow Light Color:

Press the GLOW button again to select an individual solid color.

When a single color is selected, it will remain on that color.

Select CYCLE to smoothly transition between all of the colors.

Glow Light Brightness

Use the +/- buttons to adjust the Glow Light brightness. It has 4

intensity levels plus an OFF option. Hold the GLOW button to turn

o the Glow Light.

CHARGING

5W Wireless Charger

Charging your Phone

Phone Compatibility

• Place your phone on the platform. Your

phone should sit ﬂush and centered on

the charging pad.

• The blue Charging Indicator Light below

the LCD will be solid when your phone is

successfully charging.

• The light will ﬂash slowly if your device is

not positioned properly or if your device is

not compatible with the wireless charging

technology. If this problem persists, try

removing any large/bulky cases.

Compatible with all Qi-Enabled devices:

• iPhone 8 or newer

• Galaxy S8 or newer

• Galaxy Note 8 or newer

Compatibility may vary based on phone model and/or case selection.

This list is not comprehensive. Please check your phone’s manual for details

regarding wireless charging capabilities.

CHARGING

Blue Charging

Indicator Light

Wireless Charging FAQs

Q. Why is the blue light blinking?

A. Phone is not centered on the charging pad.

A. Your phone must be Qi-Enabled to charge.

A. If the phone has a large/thick case, it may interfere with charging.

A. Foreign objects on the charging pad may make the light blink.

Q. Why is the table surface getting warm?

A. Ensure the clock is on a hard, clean surface.

A. Do not place on cloth, paper, or other items that may obstruct airﬂow.

A. Clear dust or other obstructions from the vents on the bottom of the clock.

Important:

Wireless charging uses magnetic induction to charge your compatible smartphone. Do not

place anything between your phone and the charging pad. Keep the charging pad clear of all

foreign objects. Magnetic mounts, magnetic cases, or other objects between your phone and

the wireless charger may reduce performance or damage magnetic strips or RFID chips found

in some credit cards, security badges, passports, and key fobs. If your phone case holds any

of these sensitive items, be sure to remove them before charging or make sure they are not

between the back of your phone and the charging pad.

USB Charging Port

CHARGING

There is a 1 Amp USB Charging Port located on

the right side of your alarm clock.

 Connect your external device’s USB charging

cable (not included) into the USB Charging Port.

 Charging times may vary.

 USB Power Output: 1 Amp maximum current Right View

1 Amp USB

Charging Port

Location of your Outdoor Sensor is important for

accurate Temperature Readings.

 Mount the sensor vertically at least 6 feet o the

ground.

 Provide good airﬂow around the sensor.

 Direct sunlight can inﬂate the temperature reading, so

a north-side, shaded location is best.

 Be aware of heat sources such as sot or dryer

vents, windows or door frames.

 View our sensor mounting video here:

bit.ly/th_sensor_mounting

OUTDOOR SENSOR

Position Outdoor Sensor

OUTDOOR SENSOR

• If the sensor loses connection to the station for any reason, the station will show

NO after 30 minutes.

• The station will search for 3 minutes every hour to try and reconnect with the

sensor.

• To manually search for your outdoor sensor, hold the +button until the Reception

Icon starts to animate.

• The icon will disappear after 3 minutes if no reception is found, and NO will again

appear in the outdoor senor area.

• If the reception still doesn’t come back, install a new set of batteries in the outdoor

sensor and press the RESET button on the clock.

• When the sensor reception is received, the reception icon will remain solid and

readings will appear on the display.

Search for Outdoor Sensor

Optional Sensor Shield

• The optional Sensor Weather Shield is designed to protect your

outdoor sensor from rain and snow.

• This shield will oer limited protection from the sun’s heat.

• Optional purchase at: bit.ly/925-1418

Sold separately

13 14

APPENDIX

Speciﬁcations

Alarm Clock (617-148TXT)

Power Requirements: 5.0V Power Cord

(Included) HX13-0502500-AU-001

The plug on the power adapter is intended to

serve as the disconnect device, the socket-

outlet shall be installed near the equipment

and shall be easily accessible.

LCD Brightness: 4 Intensity Levels + OFF

(Programmable Auto-Dim Backlight Option)

Glow Light Brightness: 4 Intensity Levels

+ OFF

Programmable Snooze Duration: 5 to 120

Minutes

Indoor Temperature Range: 32°F to 99°F

(0°C to 37°C)

Wireless Charger Power Output: 5 Watts

USB Charging Port: 1 Amp Maximum Current

(Charging Cord Not Included)

Settings Backup: The time and alarm settings

will be saved for 3 minutes in the event it

loses power. Full battery backup for extended

times is not available.

Dimensions: 4.97” L x 5.34” W x 2.85” H

(12.62 cm L x 13.56 cm W x 7.24 cm H)

Outdoor Sensor (TX141-Bv4)

Temperature Range: -40°F to 140°F

(-40°C to 60°C)

Transmission Range: Over 330 ft. open air

(100 meters) RF 433MHz

Update Interval: About every 51 seconds

Power: 2-AA, IEC, LR6 batteries (not included)

Battery Life: Over 12 months

Dimensions: 1.57” L x 0.79” W x 5.12” H

(4.0cm L x 2.0cm W x 13.0 H cm)

Factory Reset: If you’re experiencing issues

with your clock, use a pen or paper clip to

press the factory RESET button on the back of

your clock.

Factory Reset

RESET

Follow La Crosse Technology on Facebook, Instagram, YouTube, and Twitter.

For detailed product videos, manuals, and more, visit our

website: bit.ly/617-148txt_support

Make sure to have your model number handy

(617-148TXT).

If you need additional support, get in touch with

our friendly customer support team:

Online: bit.ly/617-148txt

Phone Number: 1.608.782.1610

Representatives are available

Monday-Friday 8:00am to 6:00 pm CST.

Ask questions, watch setup videos, and provide feed-

back on our social media outlets.

Warranty

Recycling & Disposal Caution!

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on

this product, relating to manufacturing defects in materials and workmanship.

For Full Warranty Details, Visit: www.lacrossetechnology.com/pages/warranty

Please consider the environment when

deciding to dispose of this product.

Although household electronics are

generally safe to use on a daily basis,

incorrect disposal can cause negative

and potentially irreversible impacts on

our environment.

Check with local donation centers to

see if your product can be donated for

future use. If disposal is the only option,

federal agencies, local governments, and

certiﬁed retailers may have electronic

recycling programs in place. Programs

may vary based on location.

Please Recycle

The manufacturer is not responsible for

any radio or TV interference caused by

unauthorized changes or modiﬁcations

to this equipment. Such changes or

modiﬁcations could void the user authority

to operate the equipment.

be reproduced in any form, even in part, or

duplicated or processed using electronic,

mechanical or chemical process without the

written permission of the publisher.

This booklet may contain errors or misprints.

The information it contains is regularly

checked and corrections are included

in subsequent editions. We disclaim any

responsibility for any technical error or

printing error, or their consequences. All

trademarks and patents are recognized.

La Crosse Technology, Ltd •2830 S. 26th Street •La Crosse, WI 54601

APPENDIX

Scan for Manual/FAQs

Scan for Support

Designed in La Crosse, Wisconsin • Made in China •Printed in China •DC 112221

APPENDIX

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment o and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Caution!

Any changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

When batteries of dierent brand or type are used together, or new and old batteries are used together, some batteries may

be over-discharged due to a dierence of voltage or capacity. This can result in venting, leakage, and rupture and may cause

personal injury.

•Always purchase the correct size and grade of battery most suitable for the intended use.

•Always replace the whole set of batteries at one time, taking care not to mix old and new ones, or batteries of

dierent types.

•Clean the battery contacts and also those of the device prior to battery installation.

•Ensure the batteries are installed correctly with regard to polarity (+ and -).

•Remove batteries from product during periods of non-use. Battery leakage can cause corrosion and damage to

this product.

•Remove used batteries promptly.

•For recycling and disposal of batteries, and to protect the environment, please check the internet or your local

phone directory for local recycling centers and/or follow local government regulations.

Care & Maintenance

Inhaltsverzeichnis

Andere La Crosse Technology Wecker Handbücher

La Crosse Technology

La Crosse Technology W88723 Bedienungsanleitung

La Crosse Technology

La Crosse Technology C79141-UK Abmessungen

La Crosse Technology

La Crosse Technology Equity 31112 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WT-5721 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 616-1412v3 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 616-146 Bedienungsanleitung

La Crosse Technology

La Crosse Technology CA80765 Bedienungsanleitung

La Crosse Technology

La Crosse Technology C75785-AU Bedienungsanleitung

La Crosse Technology

La Crosse Technology SOLUNA Bedienungsanleitung

La Crosse Technology

La Crosse Technology C86224 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology 616-146AV2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WT-2171 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8056U Bedienungsanleitung

La Crosse Technology

La Crosse Technology SOLUNA C79141-MX Bedienungsanleitung

La Crosse Technology

La Crosse Technology 602-249V2 Abmessungen

La Crosse Technology

La Crosse Technology VA1 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WT-2100 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WT-2171 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WT-5120 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8249U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 616-146Av3 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8117U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology 617-89577V3 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WT-2191A Bedienungsanleitung

Beliebte Wecker Handbücher anderer Marken

Steren

Steren CLK-210 Bedienungsanleitung

COP-USA

COP-USA ALCDVR32-SL Bedienungsanleitung

Philips

Philips HF3505/70 Technisches Handbuch

Casio

Casio PQ-70 Bedienungsanleitung

iHome

iHome IA63 Bedienungsanleitung

Coopers

Coopers 9765 Bedienungsanleitung

ANJANK

ANJANK AC-190 Leitfaden

TFA

TFA 98.1075 Bedienungsanleitung

Sharper Image

Sharper Image 204050 Bedienungsanleitung

Lumie

Lumie Zest Bedienungsanleitung

Dexford

Dexford RCT200 Bedienungsanleitung

Philips

Philips AJL303/37B Bedienungsanleitung

RST

RST Q754 Bedienungsanleitung

iHome

iHome iKT50 Bedienungsanleitung

Sony

Sony dash HID-B7 Bedienungsanleitung

SVINZ

SVINZ SCC009 Bedienungsanleitung

Clas Ohlson

Clas Ohlson 918863 Bedienungsanleitung

IKEA

IKEA FNURRA Bedienungsanleitung