La Crosse Technology 817-2410 Bedienungsanleitung
SET UP GUIDE
MODEL: 817-2410 | 817-83957
PROJECTION ALARM CLOCK
with 2 AMP USB Charging and FM Radio
Power Up
2
1. Insert the 5.0 volt power adapter into an outlet, then into your clock.
Optional: Insert a CR2032 battery (not included) for backup.
2. Enter the Settings Menu to set Time.
5.0 V adapter
(included)
Optional CR2032
(not included)
Settings Menu
1. Hold the button to enter the Settings Menu.
2. Press the or button to adjust the values. Hold to adjust quickly.
3. Press the button to confirm and move to the next item.
Settings Menu
Settings Menu Order:
• Hour
• Minutes
• Snooze Duration (NO5) 5-60 minutes
Note: When setting the Hour, the “P” will show to indicate PM hours.
3
FM Radio
1. Extend the antenna for best reception.
2. Press the button to listen to the radio. ON will show briefly, followed
by the frequency in MHz.
3. Press the or button to select station. Hold to search for next clear
station.
4. Press to view Volume Setting. Use or button to adjust Volume
(1-16).
5. Press to turn radio o.
4
FM Radio
Auto Scan and Store Preset Stations:
1. Press to listen to the radio
2. Hold to automatically scan and set up to 20 stations.
Manually Store Preset Stations:
1. Press the button to listen to the radio. ON will show briefly.
2. Press the or button to select station.
3. Hold until P01 flashes to store as Preset 1.
4. Repeat steps 2 and 3 to set up to 20 Preset Stations.
Note: You can change preset stations with the above instructions.
Listen to Preset Stations:
1. Press the button to listen to the radio.
2. Press then or to select Preset Stations.
Radio Sleep Timer:
1. When the radio is on, hold , the sleep time “05” (5 minutes) will show.
2. Press repeatedly to select minutes from 05, 10, 15, 30, 45, 60, 75, 90
or OFF.
3. The clock radio reverts to the time display automatically in a few
seconds. Hold to see the sleep time remaining.
4. Press to deactivate the radio and the sleep function before the sleep
time has elapsed.
Time Alarm
5
This Projection Clock has a dual time alarm function. Use the following
instructions to set your alarm times, choose your wake up sound (buzzer or
radio), and alarm volume if you choose the radio option.
Set Alarms:
1. Hold the button to enter the Alarm Settings.
2. Press the or button to adjust the values. Hold to adjust quickly.
3. Press and release the button to confirm and move to the next item.
4. Press the button anytime to save and exit.
Alarm Settings Order:
• Alarm 1 Hour
• Alarm 1 Minutes
• Alarm 1 Wake sound: bu (buzzer) or rd (Radio)
• When rd (Radio) is selected: Alarm 1 HI/LO (volume)
• Alarm 2 Hour
• Alarm 2 Minutes
• Alarm 2 Wake sound: bu (buzzer) or rd (Radio)
• When rd (Radio) is selected: Alarm 2 HI/LO (volume)
6
Activate/Deactivate Alarm 1 & 2:
1. Press the button to activate or deactivate Alarm 1 and/or Alarm 2.
2. The Amber LED Light next to the or indicates that alarm is active.
Time Alarm
Projection
Turn O Sounding Alarm:
When alarm sounds, press the button once to stop the alarm for 24
hours.
Snooze:
When an alarm is sounding, press once, the alarm will be silenced
and come on again after the custom snooze duration selected.
Note: If your second alarm activates while the first alarm is sounding, or it
is in the snooze mode, the second alarm overrides the first alarm (the first
alarm is reset to come on the next day).
Projection ON/OFF:
The Projection will be On when Projection Alarm Clock is powered on.
1. Press the button to turn Projection O, Dim or On again.
7
Projection
Projection Image Rotation:
1. Hold the button to turn Projection 180 degrees.
2. Turn the Projection Wheel on the back of the
Projection Arm to adjust the projected image
90 degrees.
Note: The Projection Wheel will rotate to allow you to
correctly project the time onto your wall or ceiling.
Projection
Wheel
• Make sure the original adaptor (5V-2A) enclosed with your clock radio is
being used to power your clock radio.
• Connect your external device’s USB charging cable (not included) to the
USB Charging Port.
• Charging times will vary.
• USB Power Output: 2A maximum current.
• Charge 2A devices or devices that are self- regulating.
Note: This clock was designed to charge tablets or other devices requiring
more than a 2A current.
USB Charging
Adjustable Backlight
Select High or Low:
Press the button to select High or Low backlight. Backlight will dim but does
not turn o.
Adjust Low Brightness:
Rotate the Dimmer Wheel on the side of your clock to adjust the brightness of the
Low setting. The High setting is not adjustable.
The Mood Light glows below the clock, oering a gentle amber glow.
Press the button to turn this light on or o.
Mood Light
Dimmer Wheel
to adjust Low
Backlight
Mood Light
Stay in Touch
Follow La Crosse Technology on YouTube, Twitter, Facebook and Instagram.
Ask questions, watch setup videos, and provide feedback on our social
media outlets.
8
9
Care + Maintanence
Do not mix old and new batteries.
Do not mix Alkaline, Lithium, standard, or
rechargeable batteries.
Always purchase the correct size and grade of
battery most suitable for intended use.
Clean the battery contacts and also those of the
device prior to battery installation.
Ensure the batteries have been installed with
correct polarity (+/-).
Remove batteries from equipment that will not to
be used for an extended period.
Promptly remove expired batteries.
Specifications
Projection Alarm Clock (817-2410 | 817- 83957)
Power Requirements:
5V AC/DC adapter (included) KA1201A-0502000US
Optional Backup: CR2032 battery (not included)
The plug on the power adapter is intended to
serve as the disconnect device, the socket-outlet
shall be installed near the equipment and shall be
easily accessible.
Dimensions: 7.75” W x 1.97” D x 3.74” H
(19.7cm W x 5.0cm D x 9.5cm H)
USB output: 2A maximum current.
Note: This is only a power output USB device and a
USB cord cannot power the alarm itself.
Alarm duration:
Buzzer 5 minutes / Radio 1 hour
Snooze duration: 5-60 minutes programmable
Designed in La Crosse, Wisconsin •Made in China •Printed in China •DC 040621
If you require additional support, get in touch with
our friendly customer support team based in La
Crosse, WI.
Phone: 1.608.782.1610
Online: bit.ly/contact_techsupport
Our knowledgable customer support team is avail-
able: Mon-Fri 8am-6pm CST
We’re Here to Help
This product can expose you to chemicals including
styrene, which is known in the State of California to
cause cancer.
For more information, go to:
www.P65Warnings.ca.gov
WARNING:
10
Warranty Info
La Crosse Technology, Ltd. provides a 1-year
limited time warranty (from date of purchase) on
this product relating to manufacturing defects in
materials & workmanship.
La Crosse Technology, Ltd,
2830 S. 26th St.
La Crosse, WI 54601
For Full Warranty Details, Visit:
www.lacrossetechnology.com/pages/warranty
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment.
All rights reserved. This manual may not be reproduced
in any form, even in part, or duplicated or processed using
electronic, mechanical or chemical process without the
written permission of the publisher.
This booklet may contain errors or misprints. The information
it contains is regularly checked and corrections are included
in subsequent editions. We disclaim any responsibility for
any technical error or printing error, or their consequences.
All trademarks and patents are recognized.
FCC Statment
Canada Statment
This device contains licence-exempt transmitter(s)/receiver(s)
that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is
subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
L’émetteur/récepteur exempt de licence contenu dans
le présent appareil est conforme aux CNR d’Innovation,
Sciences et Développement économique Canada
applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes :
1) L’appareil ne doit pas produire de brouillage;
2) L’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
Andere Handbücher für 817-2410
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere La Crosse Technology Wecker Handbücher
La Crosse Technology
La Crosse Technology WT-5130ER Bedienungsanleitung
La Crosse Technology
La Crosse Technology WT-5120 Bedienungsanleitung
La Crosse Technology
La Crosse Technology 616-146AV2 Bedienungsanleitung
La Crosse Technology
La Crosse Technology 616-1412v2 Bedienungs- und Wartungshandbuch
La Crosse Technology
La Crosse Technology WT-2100 Bedienungsanleitung
La Crosse Technology
La Crosse Technology Radio-Controlled Travel Alarm Clock WT-2160 Bedienungsanleitung
La Crosse Technology
La Crosse Technology C87207 Bedienungsanleitung
La Crosse Technology
La Crosse Technology 616-146A Bedienungsanleitung
La Crosse Technology
La Crosse Technology 616-1412v3 Bedienungsanleitung
La Crosse Technology
La Crosse Technology 617-2410V3 Bedienungsanleitung
La Crosse Technology
La Crosse Technology 617-1485W Bedienungsanleitung
La Crosse Technology
La Crosse Technology WT-5720TWC Bedienungsanleitung
La Crosse Technology
La Crosse Technology W88723 Bedienungsanleitung
La Crosse Technology
La Crosse Technology 616-146 Bedienungsanleitung
La Crosse Technology
La Crosse Technology CA80765 Bedienungsanleitung
La Crosse Technology
La Crosse Technology WT-5442 Bedienungsanleitung
La Crosse Technology
La Crosse Technology 616-1412V3 Abmessungen
La Crosse Technology
La Crosse Technology 617-1280617-1280 Bedienungsanleitung
La Crosse Technology
La Crosse Technology Radio-Controlled Travel Alarm Clock WT-2160 Bedienungsanleitung
La Crosse Technology
La Crosse Technology 617-89577V3 Bedienungsanleitung
