La Crosse Technology 513-149V2 Bedienungsanleitung
SET UP GUIDE
MODEL: 513-149v2
ATOMIC DIGITAL
WALL CLOCK
1. Insert 2-AA batteries into your Temperature Sensor.
2. Insert 2-AA batteries into your Atomic Clock.
3. Once the sensor is reading your Clock, place the sensor outside.
Watch our sensor mounting video: bit.ly/th_sensor_mounting
TH Sensor
TX141 (all versions)
Power Up
2
Atomic Clock
513-149v2
AA
AA
AA
AA
The buttons are located at the top of your clock.
Buttons
ºF/ºC Hold to enter the Settings Menu.
Press to select Fahrenheit or Celsius Temperature display.
+ PLUS Settings Menu: Press to increase value. Hold to increase quickly.
Hold to search for Sensor
MINUS Settings Menu: Press to decrease value. Hold to decrease quickly.
Hold to start or stop Atomic Time Signal search.
SNOOZE Press to Snooze Alarm for 10 minutes.
The Snooze Icon Zz will show.
ALARM Hold to enter Alarm Settings. Press to activate/deactivate alarm.
Alarm Icon will show when alarm is active.
3
Settings Menu
1. Hold the °F/°C button until the display changes to enter the Settings
Menu.
2. Press and release the +or -button to adjust values.
3. Pressand release the °F/°C button to confirm and move to next item.
4. Press the SNOOZE button anytime to exit.
Settings Menu Order:
•WWVB Reception
•Time Zone
•Daylight Saving Time ON/OFF
•12/24 Hour Time Format
•Hour
•Minutes
•Year
•Month
•Date
WWVB OFF: When WWVB OFF is selected, you will skip to 12/24 Hour
Time setting
Weekday: The Weekday will set automatically when your Year, Month and
Date are set.
Time Zones
AST = Atlantic
EST = Eastern
CST = Central
MST = Mountain
PST = Pacific
AKT = Alaska
HAT = Hawaii
4
Atomic Time
Fahrenheit or Celsius
Press and release the °F/°C button to select Fahrenheit or Celsius
Temperature Display.
•Your Clock will automatically search for the Atomic Time Signal at UTC
7:00, 8:00, 9:00, 10:00, and 11:00.
•Press the MINUS (-) button to manually start or stop search for the WWVB
Atomic Time Signal.
•While searching, the Tower Icon will flash. The Tower Icon will be solid
when the WWVB Signal is received by your clock.
•For information about WWVB Atomic Time visit: bit.ly/atomic_time
TIME ALARM
Set Alarm:
1. Hold the ALARM button to enter the Alarm Settings Menu. “AL” will show
in the weekday area.
2. Use the + or - button to adjust the flashing values.
3. Press the ALARM button to confirm and move forward.
Activate/Deactivate Alarm:
1. Press the ALARM button to view alarm time.
2. Press and release the ALARM button again to activate or deactivate the
alarm. The Alarm Icon will show only when alarm is active.
5
Silence a sounding alarm:
Press any button except SNOOZE to silence alarm for 24 hours.
Snooze:
When the alarm sounds, press the SNOOZE button to silence the alarm
for 10 minutes. Zz will show next to the Bell Icon.
Note: The alarm will sound with increasing frequency for two minutes,
then shut off completely if not deactivated.
The arrows next to the temperature readings indicate if the temperature or
humidity is rising, falling. This will update every 30 minutes. Arrow changes
every 2 degrees Fahrenheit.
Temperature & Humidity Trend Arrows
Temperature rose over
the past 3 hours
Temperature is unchanged
over the past 3 hours
Temperature fell over
the past 3 hours
Low Battery Icons
Low Battery Icon by Indoor Temperature, replace batteries in the Clock.
Low Battery Icon by Outdoor Temperature, replace batteries in the
Outdoor Sensor.
6
If you are seeing dashes for any sensor readings, please try the
following steps:
1. Hold the PLUS (+) button to search for your outdoor sensor.
The Reception Indicator will begin to animate.
2. If after 3 minutes the sensor still isn’t connected, bring the sensor inside
next to the display and remove power from the sensor and station.
3. Press any button on the station 20 times and leave the parts sit for a few
moments with the power o.
4. Install a new set of alkaline batteries into the sensor, then power up your
station again.
5. If your sensor data is still not appearing after these steps, please contact
our support sta. For additional help visit: bit.ly/basic_restart
Search for Sensors
Sensor Placement & Mounting
For Accurate Temperature/Humidity Measurements
•Insert a mounting screw through the hole at the top to securely mount
the sensor. It can also hang from the back using a nail.
•Mount the sensor vertically in a protected well-shaded area. Keeping
it out of direct weather elements such as sunlight, rain, snow, etc. will
help avoid inaccurate readings.
•For additional protection against weather elements, a Sensor Weather
Shield: bit.ly/weather-shield can be purchased separately.
•The maximum wireless transmission range to the station is up to 330ft
(100m) in open air. This does not include walls, floors, or other large
obstructions.
•For online video instructions, visit: bit.ly/th_sensor_mounting
7
Atomic Clock (513-149v2)
Temperature Range: 32ºF to 122ºF (0ºC to 50ºC)
Update Interval: About every 30 seconds
Power: 2-AA, IEC, LR6 batteries (not included)
Specifications
Temp. Sensor (TX141 all versions)
Temperature Range: -40°F to 140°F (-40°C to 60°C)
Transmission Range: Over 330 feet (100 meters) in
open air RF 433MHz
Update Interval: About every 51 seconds
Power: 2-AA, IEC, LR6 batteries (not included)
Battery Life: Over 12 months
8
If you require additional assistance, get in touch with our
friendly customer support team based in La Crosse, WI.
Self Help: bit.ly/513-149v2_support
Online: bit.ly/contact_techsupport
Phone: 1.608.782.1610
Our knowledgable customer support team is available:
Mon-Fri 8am-6pm CST
We’re Here to Help SCAN HERE
Additional Info
and Support
Ask questions, watch setup videos, and provide feedback on our social media
outlets. Follow La Crosse Technology on YouTube, Twitter, Facebook and Instagram.
Stay in Touch!
Warranty & Patents
La Crosse Technology, Ltd. provides a 1-year limited time warranty
(from date of purchase) on this product relating to manufacturing defects in materials
& workmanship.
La Crosse Technology, Ltd, 2830 S. 26th St., La Crosse, WI 54601
For Full Warranty Details, Visit:
www.lacrossetechnology.com/pages/warranty
Patents: www.lacrossetechnology.com/pages/patents
Designed in La Crosse, Wisconsin •Made in China •Printed in China •DC021723
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using electronic,
mechanical or chemical process without the written permission of the publisher. This booklet may contain errors or misprints.
The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim any
responsibility for any technical error or printing error, or their consequences. All trademarks and patents are recognized.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modifications to this
equipment. Such changes or modifications could void the user authority to operate the equipment.
FCC Statement
Care & Maintenance
When batteries of dierent brand or type are used together, or new and old batteries are used together, some batteries may
be over-discharged due to a dierence of voltage or capacity. This can result in venting, leakage, and rupture and may cause
personal injury.
•Do not mix Alkaline, Lithium, standard, or rechargeable battteries.
•Always purchase the correct size and grade of battery most suitable for the intended use.
•Always replace the whole set of batteries at one time, taking care not to mix old and new ones, or batteries of dierent
types.
•Clean the battery contacts and also those of the device prior to battery installation.
•Ensure the batteries are installed correctly with regard to polarity (+ and -).
•Remove batteries from product during periods of non-use. Battery leakage can cause corrosion and damage to this
product.
•Remove used batteries promptly.
•For recycling and disposal of batteries, and to protect the environment, please check the internet or your local phone
directory for local recycling centers and/or follow local government regulations.
09
This product can expose you to chemicals including acrylonitrile, butadiene, and styrene, which are known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information, go to:
www.P65Warnings.gov
CA WARNING:
Andere Handbücher für 513-149V2
2
Inhaltsverzeichnis
Andere La Crosse Technology Uhr Handbücher
La Crosse Technology
La Crosse Technology WS-9412 Bedienungsanleitung
La Crosse Technology
La Crosse Technology WS-6003U Bedienungsanleitung
La Crosse Technology
La Crosse Technology WS-8256-AL Bedienungsanleitung
La Crosse Technology
La Crosse Technology Clock Bedienungsanleitung
La Crosse Technology
La Crosse Technology WT-8002UV2 Abmessungen
La Crosse Technology
La Crosse Technology 404-3030W Bedienungsanleitung
La Crosse Technology
La Crosse Technology WS-8418U-IT Bedienungsanleitung
La Crosse Technology
La Crosse Technology World Time Center WS-7092U Bedienungsanleitung
La Crosse Technology
La Crosse Technology WT-8005U Bedienungsanleitung
La Crosse Technology
La Crosse Technology 404-3556A Bedienungsanleitung
La Crosse Technology
La Crosse Technology 433-3833 Bedienungsanleitung
La Crosse Technology
La Crosse Technology C86279v4 Bedienungsanleitung
La Crosse Technology
La Crosse Technology WT-3161BKx1 Bedienungsanleitung
La Crosse Technology
La Crosse Technology 102819 Bedienungsanleitung
La Crosse Technology
La Crosse Technology WT-3181X1 Bedienungsanleitung
La Crosse Technology
La Crosse Technology BBB87740 Bedienungsanleitung
La Crosse Technology
La Crosse Technology 513-1211 Bedienungsanleitung
La Crosse Technology
La Crosse Technology WS-6118 Bedienungsanleitung
La Crosse Technology
La Crosse Technology WS-8236U Bedienungsanleitung
La Crosse Technology
La Crosse Technology WT-3102S Abmessungen
Beliebte Uhr Handbücher anderer Marken
Silicon Laboratories
Silicon Laboratories SI5324 Bedienungsanleitung
Heathkit
Heathkit GC-1005 Bedienungsanleitung
Oregon Scientific
Oregon Scientific PRYSMA RMR221P Bedienungsanleitung
Andrew O'Malley
Andrew O'Malley DOTKLOK Bedienungsanleitung
ALGE-Timing
ALGE-Timing ASC3 Bedienungsanleitung
Bodet
Bodet Profil 960 Bedienungsanleitung
