LaCie D2 Network 2 Bedienungsanleitung

Quick Install Guide

d2 Network 2

DESIGN BY NEIL POULTON

Gigabit Ethernet

Protect your investment – register for free technical support: www.lacie.com/register

Box Content

LaCie d2 Network 2

Ethernet cable

Hi-Speed USB 2.0 Cable

Power supply kit

LaCie Utilities CD-ROM

Vertical stand kit

Front View

1. Status LED

Rear View

2. ON/OFF

3. eSATA Expansion

4. Gigabit Ethernet

5. USB 2.0 Direct Connection

6. USB 2.0 Expansion

7. Power Connector

8. Kensington Lock Slot

ON OFF

eSATA LAN B USB A

ON OFF

eSATA LAN B USB A

Step 1: Connection

A. Connect the power supply.

B. Connect the Ethernet cable to the d2 Network 2

and to your network through an Ethernet outlet

or directly to a router, switch or hub.

C. Turn on the d2 Network 2 by moving the power

switch on the back to the ON position.

NOTE: Please allow approximately 3 minutes for the

d2 Network 2 to start up and become available on the

network (the front LED will stop blinking).

Step 2: Access Dashboard

A. Install LaCie Network Assistant on your computer from the LaCie Utilities

CD-ROM. Then:

Windows users: Right-click the Network Assistant icon in the system tray.

Mac users: Click the LaCieNetwork Assistant icon in the menu bar.

Linux users: Right-click the LaCie Network Assistant icon in the task bar.

B. Select Conﬁguration Window

from the menu.

If more than one LaCie server

appears in the left-hand column,

select LaCie-d2.

C. Make sure the Network tab is

selected, then click the LaCie-d2

hyperlink. The Dashboard

(administration page) will open

in your default web browser.

D. The ﬁrst time you log into

the Dashboard, the Setup

Wizard will load in your

browser. The Setup Wizard

consists of three parts:

 • General Settings: Modify the Machine Name (optional) and create the

admin account password.

• Time Conﬁguration: Select whether the time and date should be set

manually or synchronized with a third party server.

• Disk Conﬁguration: Specify how much of the total storage should be

made available when the drive is connected to your computer via USB,

and how much for when your computer is connected to the network. You

can modify this amount from 0 GB to up to 500GB (default is 0 GB).

If you choose to increase the USBShare size, it is necessary to format the

share. After completing the Setup Wizard, navigate to Drive Information >

USB Drive and select Format. Refer to the User Manual for more information.

IMPORTANT INFO: LaCie strongly recommends you do not increase the USBShare size to

more than 128 GB unless you format USBShare to either NTFS or HFS+ ﬁle system using

your operating system’s native disk utility.

E. Once you’ve ﬁnished, you can proceed to the Dashboard by clicking Finish.

NOTE: You can also change the language on the Setup Wizard page.

NOTE: The machine name can be modiﬁed later from the Dashboard.

NOTE: If necessary, you can assign the drive a static IP address from the Network section

in the Dashboard.

F. Your d2 Network 2 is conﬁgured and ready to use.

Step 3: Access Share

A. Click the LaCie Network Assistant icon in the

system tray (Windows), menu bar (Mac), or

task bar (Linux).

B. Under the machine name LaCie-d2, click

on Public.

C. Public will open in your operating system’s ﬁle browser. Transfer ﬁles to the

volume normally.

NOTE: For information on USB connection, refer to the User Manual located on the

Utilities CD-ROM.

Precautions

Do not stack more than 3 LaCie d2 Network 2 together. Do not expose the drive to

temperatures over 35° C (95° F) or 30° C (86° F) when stacked. Do not expose the device

to liquids. Use only the power supply shipped with the device.

Warranty Information

LaCie warrants your product against any defect in material and workmanship, under

normal use, for the designated warranty period. The warranty becomes effective from the

date of shipment. In the event this product is found to be defective within the warranty

period, LaCie will, at its discretion, repair or replace the defective product.

This warranty is void if:

• Theproductwasoperated/storedinabnormaluseormaintenanceconditions;

• Theproductisrepaired,modiedoraltered,unlessLaCieexpresslyauthorizessuch

repair,modicationoralterationinwriting;

• Theproductwassubjectedtoabuse,neglect,electricalfault,improperpackaging,

accidentoractsofnature;

• Theproductwasinstalledimproperly;

• Theserialnumberoftheproductisdefacedormissing;

• Thebrokenpartisareplacementpartsuchasapickuptray,etc.

• Thetampersealonthecasingisbroken.

See the User Manual (located on the Utilities CD-ROM) for more information.

Étape 1 : Connexion

A. Branchez le cordon d’alimentation.

B. Branchez le câble Ethernet au d2 Network 2 et à une prise Ethernet du réseau ou directement à

un routeur, commutateur ou concentrateur.

C. Mettez le lecteur d2 Network 2 sous tension en plaçant l’interrupteur situé au dos en position ON

(MARCHE).

REMARQUE : comptez environ 3 minutes avant que le d2 Network 2 ne démarre et ne devienne

disponible sur le réseau (la DEL sur le devant de l’appareil cessera de clignoter).

Étape 2 : Accès au tableau de bord

A. Installez LaCie Network Assistant sur votre ordinateur. Vous trouverez le programme sur le

CD-ROM d’utilitaires LaCie. Procédez ensuite aux étapes suivantes :

Utilisateurs Windows : cliquez sur l’icône Network Assistant dans la barre d’état système à

l’aide du bouton droit de la souris.

Utilisateurs Mac : cliquez sur l’icône LaCie Network Assistant dans la barre de menus.

Utilisateurs Linux : cliquez sur l’icône LaCie Network Assistant dans la barre des tâches à l’aide

du bouton droit de la souris.

B. Dans le menu, sélectionnez la fenêtre de configuration.

Sélectionnez LaCie-d2 si plus d’un serveur LaCie apparaît dans la colonne de gauche.

C. Vérifiez que l’onglet Network (réseau) est sélectionné et cliquez sur le lien LaCie-d2. tableau de

bord (page d’administration) s’ouvre dans votre navigateur web par défaut.

Procédure d’installation

Andere Handbücher für d2 Network 2

Inhaltsverzeichnis

Sprachen:

Andere LaCie Netzwerk-Hardware Handbücher

LaCie

LaCie LaCie Ethernet Disk Bedienungsanleitung

LaCie

LaCie D2 BLU-RAY XL Bedienungsanleitung

LaCie

LaCie LaCie Ethernet Big Disk Bedienungsanleitung

LaCie

LaCie d2 Network 2 Bedienungsanleitung

LaCie

LaCie 5big - Network NAS Server Bedienungsanleitung

LaCie

LaCie 5big - Network NAS Server Bedienungsanleitung

LaCie

LaCie Network Space MAX Bedienungsanleitung

LaCie

LaCie Network Space MAX Bedienungsanleitung

LaCie

LaCie 5big Network 2 Bedienungsanleitung

LaCie

LaCie LaCie Ethernet Disk Bedienungsanleitung

LaCie

LaCie Internet Space 2 Bedienungsanleitung

LaCie

LaCie LaCie Ethernet Disk Bedienungsanleitung

LaCie

LaCie d2 Network 2 Bedienungsanleitung

LaCie

LaCie 4big Rack Office Bedienungsanleitung

LaCie

LaCie big disk extreme + Bedienungsanleitung

LaCie

LaCie Rugged Secure Bedienungsanleitung

LaCie

LaCie Internet Space 2 Bedienungsanleitung

LaCie

LaCie Network Space MAX Bedienungsanleitung

LaCie

LaCie Network Space MAX Bedienungsanleitung

LaCie

LaCie 4big Rack Office Bedienungsanleitung

LaCie

LaCie Network Space MAX Bedienungsanleitung

LaCie

LaCie CloudBox Bedienungsanleitung

LaCie

LaCie 5big Network 2 Bedienungsanleitung

LaCie

LaCie 5big - Network NAS Server Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung