Laevo STRUCTURES V2.5X Bedienungsanleitung
LAEVO STRUCTURES V2.5X
Instructions for use
August 2020: for USA and Canada
EN Instructions for use
Laevo | V2.5 STRUCTURES EN | P2
Laevo | V2.5 STRUCTURES EN | P2 Laevo | V2.5 STRUCTURES EN | P3
EN
Content
1 Introduction 5
1.1 Variants 5
1.2 Explanation of warning symbols 5
2 Application 6
3 Disassembly 6
4 Assembly 6
5 Figures 7
6 Legal information 11
6.1 Liability 11
6.2 Warranty 11
Laevo | V2.5 STRUCTURES EN | P4
Overview
1
2
3
1. Chestpad
2. Torso Structure
3. SmartJoint
Laevo | V2.5 STRUCTURES EN | P4 Laevo | V2.5 STRUCTURES EN | P5
EN
1 Introduction
Thank you for choosing Laevo.
This document gives instructions for use, safety, tting and
maintenance of a part of the Laevo.
fRead carefully before use.
fKeep for future reference.
fFollow the safety instructions.
fInstruct the user in proper and safe use of the
product.
If you have questions, call Laevo or your supplier. Laevo's
contact information is on the last page.
1.1 Variants
All instructions are for LAEVO B||XO 2.5X and USA/Canada
only.
The illustrations are general examples; your product can be
dierent from the illustrations.
1.2 Explanation of warning symbols
6 DANGER! Indicates potential life-threatening or disa-
bling injury.
6 WARNING! Indicates potential serious injury.
6 CAUTION: indicates potential minor injury.
2 NOTICE: indicates potential product damage.
2 TIP: Information and tips to make it even easier to
use the Laevo.
Get more tips at www.laevo-exoskeletons.com.
Laevo | V2.5 STRUCTURES EN | P6
2 Application
These parts are meant only to be used in a complete
LAEVO V2 exoskeleton:
1. Check if all parts are supplied (Figure 2.1)
2. Check the LAEVO revision number on the label on the
inside of the SmartJoint. Use these Torso Structures
only with the following serial numbers: V2.5xxxxx to
V2.57xxxx (x can be any number).
3 Disassembly
1. Push the button on the left SmartJoint (Figure 3.1).
2. Slide the left Torso Structure out of the SmartJoint
(Figure 3.2).
3. Push the button on the left side of the Chestpad
(Figure 3.3).
4. Slide the left Torso Structure out of the Chestpad
(Figure 3.4).
5. Repeat for right side.
4 Assembly
2 NOTICE: Installation has to be done by a qualied
person. Not comfortable with bolts or screws? Let
someone else handle it.
1. Use the Torso Structure with indicator "L" for the left
side of the body.
2. Push the button on the left side of the Chestpad
(Figure 4.1).
Laevo | V2.5 STRUCTURES EN | P6 Laevo | V2.5 STRUCTURES EN | P7
EN
3. Move the Torso Structure in the hole to a comfortable
width setting. There are 3 width settings (Figure 4.2).
4. Release the button (Figure 4.3).
5. Push the button on the left SmartJoint (Figure 4.4).
6. Move the left Torso Structure in the hole to a com-
fortable height setting (Figure 4.5).
7. Rotate the indentations towards the button to make
sure the parts can lock (Figure 4.6).
8. Release the button (Figure 4.7).
9. Repeat for right side.
5 Figures
Figure 2.1
1
2
3
1. Manual
2. Right Torso Structure
3. Left Torso Structure
Laevo | V2.5 STRUCTURES EN | P8
Figure 3.1 Figure 3.2
Figure 3.3 Figure 3.4
Laevo | V2.5 STRUCTURES EN | P8 Laevo | V2.5 STRUCTURES EN | P9
EN
Figure 4.1 Figure 4.2
Figure 4.3
Laevo | V2.5 STRUCTURES EN | P10
Figure 4.4 Figure 4.5
Figure 4.6 Figure 4.7
Inhaltsverzeichnis
Andere Laevo Mobilitätshilfe Handbücher
Beliebte Mobilitätshilfe Handbücher anderer Marken
Rhythm Healthcare
Rhythm Healthcare B3800F Bedienungsanleitung
AMF-BRUNS
AMF-BRUNS PROTEKTOR Bedienungsanleitung
Drive DeVilbiss Healthcare
Drive DeVilbiss Healthcare OTTER Bedienungsanleitung
Rhythm Healthcare
Rhythm Healthcare C500U Bedienungsanleitung
Lumex
Lumex RJ4200A Bedienungsanleitung
Rebotec
Rebotec Jumbo Bedienungsanleitung