Lafayette Accu-Rise Operating System Bedienungsanleitung

Accu-Rise™

Operating System

Installation Instructions

Parasol Cellular Shades

CONTENTS

Getting Started:

Product View ................................................................ 1

Tools and Fasteners Needed .......................................... 2

Installation:

Installation Overview .................................................... 3

Mounting Types and Window Terminology....................... 3

Mount the Installation Brackets — Inside Mount............. 4

Mount the Installation Brackets — Outside Mount .......... 5

Mount the Installation Brackets — EndMount ................ 7

Install the Shade ........................................................... 8

Attach Hold-Down Brackets (Optional) ............................ 8

Install the Handle(s)....................................................... 9

Level the Bottom Rail (If Necessary)................................ 9

Operation:

Operate the Shade ...................................................... 10

Troubleshooting .......................................................... 11

Care:

Removing the Shade (If Necessary) .............................. 12

Cleaning Procedures ................................................... 12

GETTING STARTED

Product View

Middle

Rail

Bottom

Rail

Installation

Brackets

Handle

Headrail

Not Shown:

Bottom-Up/Top-Down Shade

Standard

Bottom-Up

Shade

Day/Night

Shade

GETTING STARTED

Thank you for purchasing cellular shades. With proper installation, operation, and care, your new

shades will provide years of beauty andperformance. Please thoroughly review this instruction

booklet before beginning the installation.

Tools and Fasteners Needed

■Flat blade and Phillips screwdriver ■Level (laser level is recommended)

■Measuring tape and pencil ■Power drill,

" drill bit, and

" hex driver

In addition, you will need fasteners designed to work with your speciﬁc mounting surface(s).

■#6 Hex Head Screws (Provided). Two 1

" screws are provided per installation bracket.

■Longer #6 Hex Head Screws (Not Provided). If using spacer blocks, use #6 screws long

enough for a secure attachment.

■#6 Flat Head Screws (Provided). If end mounting the shade, use two 1

" screws per

installation bracket.

■Speed Nuts and Screws (Provided). Extension brackets come with speed nuts and screws.

■Drywall Anchor (Not Provided). Use drywall anchors when mounting into drywall.

Speed Nut

and Screw

(Provided with Each

Extension Bracket)

#6 x 1

Hex Head Screw

(Provided)

Longer #6 Hex Head Screw

for Use with Spacer Blocks

(Not Provided)

#6 Flat Head Screw

for Use with Common

Headrail End Mounts

(Provided)

INSTALLATION

Installation Overview

■Your order will include the correct number of installation brackets for your shade width, as

shown in the table.

➤There are two sizes of installation brackets, one for

" and

" pleat sizes and a larger one for the 1

pleat size.

➤For end mounts, only two brackets are used up to the

maximum width of 72".

Mounting Types and Window Terminology

If the installation brackets are mounted correctly, the rest of the installation process follows very

easily. To prepare for this important ﬁrst step, review the mounting types and basic window

terminology illustrated below.

■Refer to the appropriate page below based on your order:

➤Inside Mount — Page4

➤Outside Mount — Page5

➤End Mount — Page7

1¼"

Installation

Bracket

3∕8" and ¾"

Installation

Bracket

1¼"

End Mount

Brackets

3∕8" and ¾"

End Mount

Brackets

Shade

Width

Brackets

Required

12" – 36" 2

" – 72" 3

" – 108" 4

108

" – 120" 5

Outside Mount

Shade mounts outside

window opening.

Inside Mount

Shade ﬁts within

window opening.

Collectively, the sill and

jambs are called the

“window casement.”

Molding

Head Jamb

Sill

Jamb Jamb

INSTALLATION

Mount the Installation Brackets — Inside Mount

■Measure 2" from each jamb for bracket location.

➤If more than two installation brackets came with your order, space additional bracket(s)

evenly between the two end brackets and mark their location. Mount into wood

whenever possible.

■Center the brackets on yourmarks, then mark the screw holes.

➤The minimum casement depth for mounting the installation brackets is

". Mark both of

the winged screwholes with the shallow mounting depths.

➤The minimum casement depth for a fully recessed mount is 2

" for

" and

"pleat

size; and 3" for 1

" pleat size. Mark the center screw hole when depth permits.

IMPORTANT: The front edges of the brackets must be level and aligned to each other.

■Drill the screw holes using a

" drill bit.

CAUTION: Use drywall anchors when mounting into drywall.

■Use a level to check that the mounting surface is level. Shim the brackets if necessary.

■Attach the installation brackets using the screws provided.

Proceed to “Install the Shade” on page 8.

2" Space Evenly

Jamb Jamb

Space Evenly 2"

See Depth

Chart

Use Center Hole

When Depth Permits

INSTALLATION

Mount the Installation Brackets — Outside Mount

■Center the headrail over the window opening at the desired height. Use a pencil to lightly

mark each end of the headrail on the mounting surface.

➤Alternatively, measure the width of the headrail and use that width to mark the headrail

end points over the window opening.

■Mark 2" from each end of the headrail.

➤If more than two installation brackets came with your order, space additional bracket(s)

evenly between the two end brackets and mark theirlocation. Mount into wood

whenever possible.

■Center the installation brackets on your marks and mark where to drill the screw holes.

➤A minimum ﬂat vertical surface of 1

" for installation brackets or extension brackets

isrequired.

➤The top of the installation brackets or extension brackets should be at the desired height.

The brackets should be level andaligned.

➤When using extension brackets, mark two screw holes per bracket.

CAUTION: The rear of the brackets must be ﬂush against a ﬂat mounting surface. Do

not mount brackets oncurved molding.

■Drill the screw holes using a

" drill bit.

CAUTION: Use drywall anchors when mounting into drywall.

2" 2"

Space EvenlySpace Evenly

Headrail End Marks

Window Opening

INSTALLATION

■Attach the installation or extension brackets using the screws provided.

IMPORTANT: The front edges of the installation brackets must be level and aligned to

each other.

■If using spacer blocks, ﬁrst attach the installation

bracket to the

" spacer block before stacking

additional spacer blockstogether.

➤Insert the legs of the installation bracket into the

tabs on thespacer block.

➤Then rotate the installation bracket back.

■Attach the spacer block/installation bracket

to a ﬂat vertical mounting surface with a

#6mounting screw long enough for asecure

installation.

➤A maximum of 1

" of spacer blocks per

installation bracket is recommended.

➤The top of the spacer blocks should be at the

desired shade height.

IMPORTANT: The front edges of the installation

brackets must be level and aligned to each other.

IMPORTANT: Use drywall anchors when mounting

into drywall.

■If using extension brackets, attach an installation

bracket to the underside of each extension bracket

using theprovided screws and speed nuts.

Proceed to “Install the Shade” on page 8.

TabTab

Spacer

Blocks

Speed

Nut

Extension

Bracket

INSTALLATION

Mount the Installation Brackets — EndMount

End mount the headrail when conventional mounting techniques will not work — for example, in

an arched window opening.

■Position the end mount brackets so that the top of the attached installation brackets equal

the ordered height of the shade.

CAUTION: Both brackets must be installed at the

same depth and height.

■Mark both screw holes.

➤The mounting surface must be vertical and ﬂat, not

part of an archedcurve.

➤Minimum mounting depth is 1

" for

" and

" pleat sizes . Minimum mounting depth for a

fullyrecessed end mount is 2

" for

" and

pleat sizes.

➤Minimum mounting depth is 2" for 1

" pleat size.

Mininum mounting depth for a fully recessed end

mount is 3" for 1

" pleat size.

■Drill the holes using a

" drill bit.

■Attach the end mount installation brackets usingthe ﬂat head

screwsprovided.

CAUTION: Drywall mounting is not recommended.

IMPORTANT: For instructions on installing an

arch over a rectangular shade, see the installation,

instructions that came with your arch shade.

Proceed to “Install the Shade” on page 8.

Minimum

Ordered

Shade

Height

Minimum

Ordered

Shade

Height

INSTALLATION

Install the Shade

■Fit the front channel on top of the headrail onto the

front lip of the installation brackets.

■Push the headrail up and back until it snaps into

place.

■Check to ensure the headrail is securely in the

brackets.

➤Check that the bottom of the headrail is snapped

into the base of each bracket.

➤Check that the front lip of each bracket is in the

front channel of the headrail.

➤If any brackets are not installed correctly, release

the shade and reinstall. See “Removing the

Shade (If Necessary)” on page12.

Attach Hold-Down Brackets (Optional)

Hold-down brackets provide stability and prevent swaying by securing the bottom rail (often used

in French door applications). Hold-down brackets can only be used on outside mountshades.

■Lower the shade and place the pins from the hold-down

brackets into the bottom rail end caps.

■On the mounting surface, mark the screw holes.

■Drill the screw holes using a

" drill bit.

➤Check that the brackets are level and aligned.

■Attachthe hold-down brackets to the mounting surface using the screws provided.

The back of the headrail

snaps into the bracket.

The front of the bracket

ﬁts under the groove.

Headrail

Bracket

Snap

in Place

Good

Bad

Good

Bad

Inhaltsverzeichnis

Andere Lafayette Inneneinrichtung Handbücher

Lafayette

Lafayette Parasol Accu-Rise Bedienungsanleitung

Lafayette

Lafayette PARKE Faux Wood Shutters Bedienungsanleitung

Lafayette

Lafayette parasol Bedienungsanleitung

Lafayette

Lafayette Allure Series Bedienungsanleitung

Lafayette

Lafayette Manh Truc Bedienungsanleitung

Lafayette

Lafayette Genesis series Bedienungsanleitung

Lafayette

Lafayette Auto-Lift Parasol Cellular Shades Bedienungsanleitung

Lafayette

Lafayette Parasol Cellular Shade Bedienungsanleitung

Lafayette

Lafayette Panel Drape with Decorative Wood Pole Bedienungsanleitung

Lafayette

Lafayette Tenera Auto-Lift Bedienungsanleitung

Lafayette

Lafayette parasol Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung