Doc#: 60-70-004
User’s Manual Revision: 07
Page 2
USA: +1 888.246.9050 Europe: +44.1342.315044 Asia: +886.3.312.9292
Table of Contents
1. .......................................................................................... 2Introduction
2. ............................................................................. 2Incoming Inspection
3. ................................................................................... 3Product Handling
4. ......................................................................... 3Technical specifications
5. ................................................ 8Installation and Operation Instructions
6. .............................................................. 9Recommended Fluid Couplings
7. ................................................................................... 9Digital Controller
8. ........................................................................ 11Troubleshooting Guide
9. ....................................................................................... 12Serviceability
10. .......................................................................................... 12Warranty
11. ............................................................................. 13Return Procedure
1. Introduction
Laird Technologies’ solid-state recirculating liquid chillers are designed to provide
cooling for a wide range of water solutions, and can be used for cooling in many
medical, laser, and test laboratory applications. They are intended to work in
“closed loop” systems that separate the coolant from the outside environment,
protecting the purity of the cooled product.
This manual provides the necessary general information for proper installation
and operation and has been developed to achieve the best results when using the
Laird Technologies chiller.
2. Incoming Inspection
Laird Technologies’ chiller units are designed, built, and packaged to withstand
the shock and vibration normally associated with shipment by common carriers.
Occasionally, improper handling during shipment, such as excessive vibration,
crushing, etc., will cause damage to the product. Therefore, a thorough
inspection should be provided upon receipt of all shipments. Any packaging
tears, dents, scratches, or loose objects are signs of damage and should be noted
on the Freight Bill. Packages should be opened promptly and units inspected for
concealed damage. If damage is found, an immediate claim must be filed
with the freight carrier and an inspection requested. Retain all packing
materials. Laird Technologies cannot be responsible for Consignee’s failure to file
a timely freight claim.
